1. Messages
  2. downgrade openssl libraryes

Re: downgrade openssl libraryes

Bas Mevissen
 

On 2021-08-30 16:56, Ivan Riabtsov wrote:
I have phytec imx6ul board with a preinstalled os. On this os opessl
version is 1.0.2j i need to build nginx for this board, but i can't
build yocto same version as i have on board, so I grabbed a newer
version of yocto from phytec site, rolled back glibc and try to roll
back openssl. I do not want to flash the device, as I'm afraid to get
brick
Why are you afraid to brick the device? You can use mfgtool to reflash the device from scratch, including u-boot. It works with a special boot mode pin setting and uses an USB port. Depending on the board, one might need to buy or create a custom cable.

Bas.

пн, 30 авг. 2021 г. в 16:51, Alexander Kanavin <alex.kanavin@...>:
openssl 1.0.2 went out of support at the end of 2019 and you should not be using it. What is the problem you need to solve?
Alex
On Mon, 30 Aug 2021 at 15:33, Ivan Riabtsov <ivriabtsov@...> wrote:
hello i am trying to rollback openssl version from 1.1.1i to 1.0.2j.
Copied the recipe openssl_1.1.1i.bb to openssl_1.0.2j.bb, saved the
openssl_1.1.1i.bb version with the name openssl_1.1.1i.bb.backup
Отредактировал новый файл, вот разница в файлах:
diff -Nau ./openssl_1.1.1i.bb.backup ./openssl_1.0.2j.bb
--- ./openssl_1.1.1i.bb.backup 2021-08-27 14:46:07.085808702 +0300
+++ ./openssl_1.0.2j.bb 2021-08-27 16:12:14.216430734 +0300
@@ -7,23 +7,19 @@
# "openssl" here actually means both OpenSSL and SSLeay licenses apply
# (see meta/files/common-licenses/OpenSSL to which "openssl" is
SPDXLICENSEMAPped)
LICENSE = "openssl"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=d343e62fc9c833710bbbed25f27364c8"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=27ffa5d74bb5a337056c14b2ef93fbf6"
DEPENDS = "hostperl-runtime-native"
SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz \
file://run-ptest \
- file://0001-skip-test_symbol_presence.patch \
- file://0001-buildinfo-strip-sysroot-and-debug-prefix-map-from-co.patch
\
- file://afalg.patch \
- file://reproducible.patch \
"
SRC_URI_append_class-nativesdk = " \
file://environment.d-openssl.sh \
"
-SRC_URI[sha256sum] =
"e8be6a35fe41d10603c3cc635e93289ed00bf34b79671a3a4de64fcee00d5242"
+SRC_URI[sha256sum] =
"e7aff292be21c259c6af26469c7a9b3ba26e9abaaffd325e3dccc9785256c431"
inherit lib_package multilib_header multilib_script ptest
MULTILIB_SCRIPTS = "${PN}-bin:${bindir}/c_rehash"
@@ -122,7 +118,7 @@
# WARNING: do not set compiler/linker flags (-I/-D etc.) in
EXTRA_OECONF, as they will fully replace the
# environment variables set by bitbake. Adjust the environment
variables instead.
HASHBANGPERL="/usr/bin/env perl" PERL=perl
PERL5LIB="${S}/external/perl/Text-Template-1.46/lib/" \
- perl ${S}/Configure ${EXTRA_OECONF} ${PACKAGECONFIG_CONFARGS}
--prefix=$useprefix --openssldir=${libdir}/ssl-1.1 --libdir=${libdir}
$target
+ perl ${S}/Configure ${EXTRA_OECONF} ${PACKAGECONFIG_CONFARGS}
--prefix=$useprefix --openssldir=${libdir}/ssl-1.0 --libdir=${libdir}
$target
perl ${B}/configdata.pm --dump
}
@@ -134,30 +130,30 @@
# Create SSL structure for packages such as ca-certificates which
# contain hard-coded paths to /etc/ssl. Debian does the same.
install -d ${D}${sysconfdir}/ssl
- mv ${D}${libdir}/ssl-1.1/certs \
- ${D}${libdir}/ssl-1.1/private \
- ${D}${libdir}/ssl-1.1/openssl.cnf \
+ mv ${D}${libdir}/ssl-1.0/certs \
+ ${D}${libdir}/ssl-1.0/private \
+ ${D}${libdir}/ssl-1.0/openssl.cnf \
${D}${sysconfdir}/ssl/
# Although absolute symlinks would be OK for the target, they become
# invalid if native or nativesdk are relocated from sstate.
- ln -sf ${@oe.path.relative('${libdir}/ssl-1.1',
'${sysconfdir}/ssl/certs')} ${D}${libdir}/ssl-1.1/certs
- ln -sf ${@oe.path.relative('${libdir}/ssl-1.1',
'${sysconfdir}/ssl/private')} ${D}${libdir}/ssl-1.1/private
- ln -sf ${@oe.path.relative('${libdir}/ssl-1.1',
'${sysconfdir}/ssl/openssl.cnf')} ${D}${libdir}/ssl-1.1/openssl.cnf
+ ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/certs')} ${D}${libdir}/ssl-1.0/certs
+ ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/private')} ${D}${libdir}/ssl-1.0/private
+ ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/openssl.cnf')} ${D}${libdir}/ssl-1.0/openssl.cnf
}
do_install_append_class-native () {
create_wrapper ${D}${bindir}/openssl \
- OPENSSL_CONF=${libdir}/ssl-1.1/openssl.cnf \
- SSL_CERT_DIR=${libdir}/ssl-1.1/certs \
- SSL_CERT_FILE=${libdir}/ssl-1.1/cert.pem \
- OPENSSL_ENGINES=${libdir}/engines-1.1
+ OPENSSL_CONF=${libdir}/ssl-1.0/openssl.cnf \
+ SSL_CERT_DIR=${libdir}/ssl-1.0/certs \
+ SSL_CERT_FILE=${libdir}/ssl-1.0/cert.pem \
+ OPENSSL_ENGINES=${libdir}/engines-1.0
}
do_install_append_class-nativesdk () {
mkdir -p ${D}${SDKPATHNATIVE}/environment-setup.d
install -m 644 ${WORKDIR}/environment.d-openssl.sh
${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh
- sed 's|/usr/lib/ssl/|/usr/lib/ssl-1.1/|g' -i
${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh
+ sed 's|/usr/lib/ssl/|/usr/lib/ssl-1.0/|g' -i
${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh
}
PTEST_BUILD_HOST_FILES += "configdata.pm"
@@ -170,8 +166,8 @@
cp -r ${S}/external ${B}/test ${S}/test ${B}/fuzz ${S}/util
${B}/util ${D}${PTEST_PATH}
# For test_shlibload
- ln -s ${libdir}/libcrypto.so.1.1 ${D}${PTEST_PATH}/
- ln -s ${libdir}/libssl.so.1.1 ${D}${PTEST_PATH}/
+ ln -s ${libdir}/libcrypto.so.1.0 ${D}${PTEST_PATH}/
+ ln -s ${libdir}/libssl.so.1.0 ${D}${PTEST_PATH}/
install -d ${D}${PTEST_PATH}/apps
ln -s ${bindir}/openssl ${D}${PTEST_PATH}/apps
@@ -192,11 +188,11 @@
FILES_libcrypto = "${libdir}/libcrypto${SOLIBS}"
FILES_libssl = "${libdir}/libssl${SOLIBS}"
FILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf \
- ${libdir}/ssl-1.1/openssl.cnf* \
+ ${libdir}/ssl-1.0/openssl.cnf* \
"
-FILES_${PN}-engines = "${libdir}/engines-1.1"
-FILES_${PN}-misc = "${libdir}/ssl-1.1/misc"
-FILES_${PN} =+ "${libdir}/ssl-1.1/*"
+FILES_${PN}-engines = "${libdir}/engines-1.0"
+FILES_${PN}-misc = "${libdir}/ssl-1.0/misc"
+FILES_${PN} =+ "${libdir}/ssl-1.0/*"
FILES_${PN}_append_class-nativesdk = "
${SDKPATHNATIVE}/environment-setup.d/openssl.sh"
CONFFILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf"
вот новый получившийся файл:
cat openssl_1.0.2j.bb
SUMMARY = "Secure Socket Layer"
DESCRIPTION = "Secure Socket Layer (SSL) binary and related
cryptographic tools."
HOMEPAGE = "http://www.openssl.org/"
BUGTRACKER = "http://www.openssl.org/news/vulnerabilities.html"
SECTION = "libs/network"
# "openssl" here actually means both OpenSSL and SSLeay licenses apply
# (see meta/files/common-licenses/OpenSSL to which "openssl" is
SPDXLICENSEMAPped)
LICENSE = "openssl"
LIC_FILES_CHKSUM = "file://LICENSE;md5=27ffa5d74bb5a337056c14b2ef93fbf6"
DEPENDS = "hostperl-runtime-native"
SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz \
file://run-ptest \
"
SRC_URI_append_class-nativesdk = " \
file://environment.d-openssl.sh \
"
SRC_URI[sha256sum] =
"e7aff292be21c259c6af26469c7a9b3ba26e9abaaffd325e3dccc9785256c431"
inherit lib_package multilib_header multilib_script ptest
MULTILIB_SCRIPTS = "${PN}-bin:${bindir}/c_rehash"
PACKAGECONFIG ?= ""
PACKAGECONFIG_class-native = ""
PACKAGECONFIG_class-nativesdk = ""
PACKAGECONFIG[cryptodev-linux] =
"enable-devcryptoeng,disable-devcryptoeng,cryptodev-linux,,cryptodev-module"
B = "${WORKDIR}/build"
do_configure[cleandirs] = "${B}"
#| ./libcrypto.so: undefined reference to `getcontext'
#| ./libcrypto.so: undefined reference to `setcontext'
#| ./libcrypto.so: undefined reference to `makecontext'
EXTRA_OECONF_append_libc-musl = " no-async"
EXTRA_OECONF_append_libc-musl_powerpc64 = " no-asm"
# adding devrandom prevents openssl from using getrandom() which is
not available on older glibc versions
# (native versions can be built with newer glibc, but then relocated
onto a system with older glibc)
EXTRA_OECONF_class-native = "--with-rand-seed=os,devrandom"
EXTRA_OECONF_class-nativesdk = "--with-rand-seed=os,devrandom"
# Relying on hardcoded built-in paths causes openssl-native to not be
relocateable from sstate.
CFLAGS_append_class-native = " -DOPENSSLDIR=/not/builtin
-DENGINESDIR=/not/builtin"
CFLAGS_append_class-nativesdk = " -DOPENSSLDIR=/not/builtin
-DENGINESDIR=/not/builtin"
do_configure () {
os=${HOST_OS}
case $os in
linux-gnueabi |\
linux-gnuspe |\
linux-musleabi |\
linux-muslspe |\
linux-musl )
os=linux
;;
*)
;;
esac
target="$os-${HOST_ARCH}"
case $target in
linux-arm*)
target=linux-armv4
;;
linux-aarch64*)
target=linux-aarch64
;;
linux-i?86 | linux-viac3)
target=linux-x86
;;
linux-gnux32-x86_64 | linux-muslx32-x86_64 )
target=linux-x32
;;
linux-gnu64-x86_64)
target=linux-x86_64
;;
linux-mips | linux-mipsel)
# specifying TARGET_CC_ARCH prevents openssl from (incorrectly) adding
target architecture flags
target="linux-mips32 ${TARGET_CC_ARCH}"
;;
linux-gnun32-mips*)
target=linux-mips64
;;
linux-*-mips64 | linux-mips64 | linux-*-mips64el | linux-mips64el)
target=linux64-mips64
;;
linux-microblaze* | linux-nios2* | linux-sh3 | linux-sh4 | linux-arc*)
target=linux-generic32
;;
linux-powerpc)
target=linux-ppc
;;
linux-powerpc64)
target=linux-ppc64
;;
linux-powerpc64le)
target=linux-ppc64le
;;
linux-riscv32)
target=linux-generic32
;;
linux-riscv64)
target=linux-generic64
;;
linux-sparc | linux-supersparc)
target=linux-sparcv9
;;
esac
useprefix=${prefix}
if [ "x$useprefix" = "x" ]; then
useprefix=/
fi
# WARNING: do not set compiler/linker flags (-I/-D etc.) in
EXTRA_OECONF, as they will fully replace the
# environment variables set by bitbake. Adjust the environment
variables instead.
HASHBANGPERL="/usr/bin/env perl" PERL=perl
PERL5LIB="${S}/external/perl/Text-Template-1.46/lib/" \
perl ${S}/Configure ${EXTRA_OECONF} ${PACKAGECONFIG_CONFARGS}
--prefix=$useprefix --openssldir=${libdir}/ssl-1.0 --libdir=${libdir}
$target
perl ${B}/configdata.pm --dump
}
do_install () {
oe_runmake DESTDIR="${D}" MANDIR="${mandir}" MANSUFFIX=ssl install
oe_multilib_header openssl/opensslconf.h
# Create SSL structure for packages such as ca-certificates which
# contain hard-coded paths to /etc/ssl. Debian does the same.
install -d ${D}${sysconfdir}/ssl
mv ${D}${libdir}/ssl-1.0/certs \
${D}${libdir}/ssl-1.0/private \
${D}${libdir}/ssl-1.0/openssl.cnf \
${D}${sysconfdir}/ssl/
# Although absolute symlinks would be OK for the target, they become
# invalid if native or nativesdk are relocated from sstate.
ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/certs')} ${D}${libdir}/ssl-1.0/certs
ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/private')} ${D}${libdir}/ssl-1.0/private
ln -sf ${@oe.path.relative('${libdir}/ssl-1.0',
'${sysconfdir}/ssl/openssl.cnf')} ${D}${libdir}/ssl-1.0/openssl.cnf
}
do_install_append_class-native () {
create_wrapper ${D}${bindir}/openssl \
OPENSSL_CONF=${libdir}/ssl-1.0/openssl.cnf \
SSL_CERT_DIR=${libdir}/ssl-1.0/certs \
SSL_CERT_FILE=${libdir}/ssl-1.0/cert.pem \
OPENSSL_ENGINES=${libdir}/engines-1.0
}
do_install_append_class-nativesdk () {
mkdir -p ${D}${SDKPATHNATIVE}/environment-setup.d
install -m 644 ${WORKDIR}/environment.d-openssl.sh
${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh
sed 's|/usr/lib/ssl/|/usr/lib/ssl-1.0/|g' -i
${D}${SDKPATHNATIVE}/environment-setup.d/openssl.sh
}
PTEST_BUILD_HOST_FILES += "configdata.pm"
PTEST_BUILD_HOST_PATTERN = "perl_version ="
do_install_ptest () {
# Prune the build tree
rm -f ${B}/fuzz/*.* ${B}/test/*.*
cp ${S}/Configure ${B}/configdata.pm ${D}${PTEST_PATH}
cp -r ${S}/external ${B}/test ${S}/test ${B}/fuzz ${S}/util ${B}/util
${D}${PTEST_PATH}
# For test_shlibload
ln -s ${libdir}/libcrypto.so.1.0 ${D}${PTEST_PATH}/
ln -s ${libdir}/libssl.so.1.0 ${D}${PTEST_PATH}/
install -d ${D}${PTEST_PATH}/apps
ln -s ${bindir}/openssl ${D}${PTEST_PATH}/apps
install -m644 ${S}/apps/*.pem ${S}/apps/*.srl ${S}/apps/openssl.cnf
${D}${PTEST_PATH}/apps
install -m755 ${B}/apps/CA.pl ${D}${PTEST_PATH}/apps
install -d ${D}${PTEST_PATH}/engines
install -m755 ${B}/engines/ossltest.so ${D}${PTEST_PATH}/engines
}
# Add the openssl.cnf file to the openssl-conf package. Make the libcrypto
# package RRECOMMENDS on this package. This will enable the configuration
# file to be installed for both the openssl-bin package and the libcrypto
# package since the openssl-bin package depends on the libcrypto package.
PACKAGES =+ "libcrypto libssl openssl-conf ${PN}-engines ${PN}-misc"
FILES_libcrypto = "${libdir}/libcrypto${SOLIBS}"
FILES_libssl = "${libdir}/libssl${SOLIBS}"
FILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf \
${libdir}/ssl-1.0/openssl.cnf* \
"
FILES_${PN}-engines = "${libdir}/engines-1.0"
FILES_${PN}-misc = "${libdir}/ssl-1.0/misc"
FILES_${PN} =+ "${libdir}/ssl-1.0/*"
FILES_${PN}_append_class-nativesdk = "
${SDKPATHNATIVE}/environment-setup.d/openssl.sh"
CONFFILES_openssl-conf = "${sysconfdir}/ssl/openssl.cnf"
RRECOMMENDS_libcrypto += "openssl-conf"
RDEPENDS_${PN}-ptest += "openssl-bin perl perl-modules bash"
RDEPENDS_${PN}-bin += "openssl-conf"
BBCLASSEXTEND = "native nativesdk"
CVE_PRODUCT = "openssl:openssl"
# Only affects OpenSSL >= 1.1.1 in combination with Apache < 2.4.37
# Apache in meta-webserver is already recent enough
CVE_CHECK_WHITELIST += "CVE-2019-0190"
I understand that I need to figure out the configs yourself, but I get
this error when executing the
bitbake openssl-native
ERROR: Execution of
'/home/ivr/work/yocto_orig/build/tmp/work/x86_64-linux/openssl-native/1.0.2j-r0/temp/run.do_configure.1071458'
failed with exit code 2:
| unable to read opensslv.h:No such file or directory
| Configuring for linux-x86_64
| no-devcryptoeng [option] OPENSSL_NO_DEVCRYPTOENG (skip dir)
| no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
(skip dir)
| no-gmp [default] OPENSSL_NO_GMP (skip dir)
| no-jpake [experimental] OPENSSL_NO_JPAKE (skip dir)
| no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5
| no-libunbound [experimental] OPENSSL_NO_LIBUNBOUND (skip dir)
| no-md2 [default] OPENSSL_NO_MD2 (skip dir)
| no-rc5 [default] OPENSSL_NO_RC5 (skip dir)
| no-rfc3779 [default] OPENSSL_NO_RFC3779 (skip dir)
| no-sctp [default] OPENSSL_NO_SCTP (skip dir)
| no-shared [default]
| no-ssl-trace [default] OPENSSL_NO_SSL_TRACE (skip dir)
| no-ssl2 [default] OPENSSL_NO_SSL2 (skip dir)
| no-store [experimental] OPENSSL_NO_STORE (skip dir)
| no-unit-test [default] OPENSSL_NO_UNIT_TEST (skip dir)
| no-weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS (skip dir)
| no-zlib [default]
| no-zlib-dynamic [default]
| IsMK1MF=0
| WARNING: exit code 2 from a shell command.
|
As far as I can understand, the opensslv.h file is generated just at
the configuration stage, why does the configuration stage give an
error of the absence of this file?
Join yocto@lists.yoctoproject.org to automatically receive all group messages.