Yocto build isnot Booting up on board zc702 #gatesgarth #linux #yocto


shoaib akhtar
 

i have tried to build yocto image.  And it compiled successfully without any error but when am trying to BOOT them it didnt prompt any error message my BBlayer.conf is shown below
 
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
POKY_BBLAYERS_CONF_VERSION = "2"

BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
  /media/vmnrtc/Drive/poky/meta \
  /media/vmnrtc/Drive/poky/meta-poky \
  /media/vmnrtc/Drive/poky/meta-yocto-bsp \
  /media/vmnrtc/Drive/poky/meta-xilinx/meta-xilinx-bsp \
  /media/vmnrtc/Drive/poky/meta-openembedded/meta-oe \
  /media/vmnrtc/Drive/poky/meta-openembedded/meta-python \
  /media/vmnrtc/Drive/poky/meta-xilinx/meta-xilinx-standalone \
  /media/vmnrtc/Drive/poky/meta-xilinx-tools \
  /media/vmnrtc/Drive/poky/build/meta-networking \
  "

MY files in image directories
 
 
boot.bin
boot.bin-zc702-zynq7
boot.bin-zc702-zynq7-v2020.01-xilinx-v2020.2+gitAUTOINC+bb4660c33a-r0
boot.scr
core-image-minimal-zc702-zynq7-20210629031233.qemuboot.conf
core-image-minimal-zc702-zynq7-20210629031233.rootfs.cpio
core-image-minimal-zc702-zynq7-20210629031233.rootfs.cpio.gz.u-boot
core-image-minimal-zc702-zynq7-20210629031233.rootfs.manifest
core-image-minimal-zc702-zynq7-20210629031233.rootfs.tar.gz
core-image-minimal-zc702-zynq7-20210629031233.testdata.json
core-image-minimal-zc702-zynq7.cpio
core-image-minimal-zc702-zynq7.cpio.gz.u-boot
core-image-minimal-zc702-zynq7.manifest
core-image-minimal-zc702-zynq7.qemuboot.conf
core-image-minimal-zc702-zynq7.tar.gz
core-image-minimal-zc702-zynq7.testdata.json
modules--5.4+git0+62ea514294-r0-zc702-zynq7-20210622034511.tgz
modules-zc702-zynq7.tgz
pxeboot
pxelinux.cfg
u-boot.elf
u-boot.img
u-boot-xlnx-AUTOINC+bb4660c33a.elf
u-boot-xlnx-initial-env
u-boot-xlnx-initial-env-zc702-zynq7
u-boot-xlnx-initial-env-zc702-zynq7-v2020.01-xilinx-v2020.2+gitAUTOINC+bb4660c33a-r0
u-boot-zc702-zynq7.elf
u-boot-zc702-zynq7.img
u-boot-zc702-zynq7-v2020.01-xilinx-v2020.2+gitAUTOINC+bb4660c33a-r0.img
u-boot-zynq-scr--1.0-r0.scr
uEnv.txt
uImage
uImage--5.4+git0+62ea514294-r0-zc702-zynq7-20210622034511.bin
uImage-zc702-zynq7.bin
zImage
zImage--5.4+git0+62ea514294-r0-zc702-zynq7-20210622034511.bin
zImage-zc702-zynq7.bin
zynq-zc702--5.4+git0+62ea514294-r0-zc702-zynq7-20210622034511.dtb
zynq-zc702.dtb
zynq-zc702-zc702-zynq7.dtb
 
 
 
what should i do to BOOT my yocto build image on zc702 board
 
   
   
 

Join yocto@lists.yoctoproject.org to automatically receive all group messages.