From the log log.do_rootfs.31340 file, there are the following:

[1] ERROR: Postinstall scriptlets of ['hostapd'] have failed.

HOSTAP stands for: HOST Access Point Daemon. I could not conclude too much from:
https://en.wikipedia.org/wiki/Hostapd

It is kind of a hot spot, as my best understanding is.

[2] Details of the failure are in
/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.

So, my best guess, looking into log.do_rootfs will tell us much more.

Please, attach this one for our review as well.

Thank you,
Zoran
_______

On Wed, May 12, 2021 at 5:29 PM rohit jadhav <rohitbjadhav1@...> wrote:
>
> Hi Zoran ,
> I have attached the log file for your reference.
> Thank You
> Regards
> Rohit
>
> On Wed, May 12, 2021 at 7:50 PM Zoran Stojsavljevic <zoran.stojsavljevic@...> wrote:
>>
>> > Log file in:
>> > /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/
>> > imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/
>> log.do_rootfs.31340
>>
>> Could you, please, attach a log file?
>>
>> Thank you,
>> Zoran
>> _______
>>
>>
>> On Wed, May 12, 2021 at 2:01 PM rohit jadhav <rohitbjadhav1@...> wrote:
>>>
>>> Facing following issue :
>>> ERROR: core-image-minimal-1.0-r0 do_rootfs: Postinstall scriptlets of ['hostapd'] have failed. If the intention is to defer them to first boot,
>>> then please place them into pkg_postinst_ontarget_${PN} ().
>>> Deferring to first boot via 'exit 1' is no longer supported.
>>> Details of the failure are in /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.
>>> ERROR: Logfile of failure stored in: /home/tel/imx_yocto_bsp_Zeus/Yocto_setup/build_imx6ull/tmp/work/imx6ull14x14evk-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_rootfs.31340
>>> ERROR: Task (/home/tel/imx_yocto_bsp_Zeus/Yocto_setup/sources/poky/meta/recipes-core/images/core-image-minimal.bb:do_rootfs) failed with exit code '1'
>>>
>>> Please guide me if anyone have any idea to resolve.
>>>
>>> Thanks in advance.
>>>
>>>