Re: #yocto #kernel #yocto #kernel


Monsees, Steven C (US)
 

Do we know why it was disabled ?

I will look into this, thanks...

-----Original Message-----
From: Quentin Schulz <quentin.schulz@...>
Sent: Thursday, January 14, 2021 12:18 PM
To: Monsees, Steven C (US) <steven.monsees@...>
Cc: Khem Raj <raj.khem@...>; yocto@...
Subject: Re: [yocto] #yocto #kernel

*** WARNING ***
EXTERNAL EMAIL -- This message originates from outside our organization.


Hi Steve,

On Thu, Jan 14, 2021 at 05:11:29PM +0000, Monsees, Steven C (US) via lists.yoctoproject.org wrote:

Khem:

Should have waited for build to complete... this just delays where the error occurs.

Now rather than upfront, it fails on packaging with the following error:

ERROR: aiox-defaultfs-1.0-r0 do_rootfs: Unable to install packages. Command '/disk0/scratch/smonsees/yocto/workspace_3/meta-bae/meta-limws/builds/aiox-default/tmp/work/aiox_default-poky-linux/aiox-defaultfs/1.0-r0/recipe-sysroot-native/usr/bin/opkg --volatile-cache -f /disk0/scratch/smonsees/yocto/workspace_3/meta-bae/meta-limws/builds/aiox-default/tmp/work/aiox_default-poky-linux/aiox-defaultfs/1.0-r0/opkg.conf -t /disk0/scratch/smonsees/yocto/workspace_3/meta-bae/meta-limws/builds/aiox-default/tmp/work/aiox_default-poky-linux/aiox-defaultfs/1.0-r0/temp/ipktemp/ -o /disk0/scratch/smonsees/yocto/workspace_3/meta-bae/meta-limws/builds/aiox-default/tmp/work/aiox_default-poky-linux/aiox-defaultfs/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version install base-files bash bc binutils bridge-utils coreutils crush cs-hdlc dhcp-server dhcp-server-config e2fsprogs ethtool haveged hdparm i2c-tools inetutils inetutils-rsh iperf3 iproute2 iptables iputils iputils-ping kernel-modules key-helper kmod libpci3 module-init-tools mtd-utils mtd-utils-ubifs nano ncurses ncurses-dev net-tools netcat nfs-utils nfs-utils-stats ntfs-3g ntfsprogs openssh openssh-sftp-server packagegroup-base-vfat packagegroup-core-boot pciutils pciutils-ids peekpoke perl plx8000 plx8000nt plxsvc pub-key python python-stringold python-subprocess rsync run-postinsts sg3-utils swig tar tcpdump tftp-hpa tftp-hpa-server traceroute usbutils util-linux wolfssl xinetd' returned 255:
Collected errors:
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'inetutils-rsh'.

What has changed in the build process ?, under rocko I do not see an issue adding inetutils-rsh...
http://cgit.openembedded.org/openembedded-core/commit/meta/recipes-connectivity/inetutils?h=zeus&id=9e13dad6ea76dd036098ef62427804e4138bf83b

It's disabled by default now.

You can probably re-enable it by appending --enable-rsh again I guess?

Quentin

Join {yocto@lists.yoctoproject.org to automatically receive all group messages.