[ all: Let me share the replay I made in private to Ajit. ]

Hi Ajith,

Unfortunately because you do not provide much information about the
"some error" you are seeing there is not much that can be done right
away to support you.

Here is a useful article on how to ask technical questions.

* https://opensource.com/life/16/10/how-ask-technical-questions

And here is a relevant quote from it that should help you increase
your chances of getting an answer:

You should include a clear description of the issue you're facing or goal you're trying to achieve. Include as
much specific relevant information as you can:

* If the problem is reproducible, what are the exact steps to do so?
* If you're getting an error message or debugging information, make sure you include it verbatim.
* Have you made any recent changes?
* What Linux distribution and version are you using?
* Is the hardware you're using a factor?

The more relevant information you include, the more likely you'll receive a solution that actually works.

You should also include any research you've done and steps you've already taken
to try to solve the issue. This not only prevents receiving a solution you've already
tried, but shows that you've already put effort into solving the issue yourself.

Generic answer about your question based on the information you provided:

* NXP i.MX8M is supported in Yocto through NXP's own Yocto BSP (not
just base Yocto) and your question
is probably more likely to get an answer on NXP's community forums
at https://community.nxp.com/

Kind Regards, Laurent.
--
https://soccasys.com

On Thu, Nov 28, 2019 at 9:53 AM Josef Holzmayr
<holzmayr@...> wrote:

On Thu, Nov 28, 2019 at 02:02:29PM +0530, Aj Cit wrote:

I've followed the instruction from the yocto project:
https://www.yoctoproject.org/docs/3.0/brief-yoctoprojectqs/brief-yoctoprojectqs.html

This can not be exactly true, as this guide certainly does not include
anything related to the imx8. So you are either still building for qemu
(as it defaults to), or using seomthing additional that you're not
mentioning.

till the bitbake command. However, I'm getting the following error:
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:

Do not use Bitbake as root.

Here is your answer: do not run botbake as the root user :)

In a nutshell, I recommend watching at least the first couple of videos
here:
https://www.youtube.com/playlist?list=PLD4M5FoHz-TxMfBFrDKfIS_GLY25Qsfyj

Greetz

On Thu, Nov 28, 2019 at 12:29 PM Aj Cit <aj.ci.01.239@...> wrote:

Hello,

I'm trying to build a Yocto image for NXP i.MX8M (4 core 64-bit A53s). I
am getting some error when I execute the bitmake command.

I'd appreciate if you could guide me with next steps. Any Guide or url
will be helpful.

Thanks
Ajith

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#47444): https://lists.yoctoproject.org/g/yocto/message/47444
Mute This Topic: https://lists.yoctoproject.org/mt/63894854/3618269
Group Owner: yocto+owner@...
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [holzmayr@...]
-=-=-=-=-=-=-=-=-=-=-=-

--
———————————————
Josef Holzmayr
Software Developer Embedded Systems

Tel: +49 8444 9204-48
Fax: +49 8444 9204-50

R-S-I Elektrotechnik GmbH & Co. KG
Woelkestrasse 11
D-85301 Schweitenkirchen
www.rsi-elektrotechnik.de
———————————————
Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393
Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg
Ust-IdNr: DE 128592548

_____________________________________________________________
Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363
Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg
USt-IdNr.: DE 128592548

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#47447): https://lists.yoctoproject.org/g/yocto/message/47447
Mute This Topic: https://lists.yoctoproject.org/mt/63894854/3618354
Group Owner: yocto+owner@...
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [laurent.gauthier@...]
-=-=-=-=-=-=-=-=-=-=-=-

--
Laurent Gauthier
Phone: +33 630 483 429
http://soccasys.com