On Wed, 2011-11-09 at 12:03 -0800, James Abernathy wrote:
On Wed, Nov 9, 2011 at 2:43 PM, Tom Zanussi <tom.zanussi@...>
wrote:
On Wed, 2011-11-09 at 10:24 -0800, James Abernathy wrote:
>
>
> On Wed, Nov 9, 2011 at 12:56 PM, James Abernathy
> <jfabernathy@...> wrote:
>
>
> On Wed, Nov 9, 2011 at 12:51 PM, Tom Zanussi
> <tom.zanussi@...> wrote:
> On Wed, 2011-11-09 at 09:41 -0800, James
Abernathy
> wrote:
> > In the past I've built the crownbay-noemgd
> successfully, using the
> > Development Manual Appendix A corrected
instructions
> that have been
> > patched. I thought I'd try my hand at
building the
> crownbay with EMGD
> > this time. Following the instructions in
the
> Appendix A, but using
> > the opposite instructions related to EMGD,
plus
> installing EMGD per
> > the instructions in the README file in the
> meta-crownbay directory, I
> > got a long way into the build, but failed
toward the
> end in what looks
> > like a dependance issue. Can someone spot
what I
> need to change???
> >
>
>
> Yes, you've hit the missing step added to
the update
> release notes here:
>
>
http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1
>
>
> 7. Remove the following unused file from the
emgd
> binaries in order to
> avoid a packaging error at build-time:
> $ rm
>
meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so
>
>
> This was an omission in the README, queued
for the
> next edison point
> release.
>
> If I remember my MeeGo stuff, then removing this
file will
> eliminate the ability to do Media decode
acceleration??
>
>
> Not sure what it takes to get past this error. Just removing
the file
> and rerunning bitbake gets the same error. Do I need
> to reset something before rerunning???
>
You should bump the PR of emgd-driver-bin_1.8.bb to get it to
use the
new contents i.e.
change
PR = "r7"
to
PR = "r8"
To
Okay, that fixed the issue. Now, how was I to know that? Is that a
basic step in reruns? I'm guessing if I started from scratch and rm'ed
the video file the first time it would have run with PR = "r7"?
Let me know what I should have read to know about the PR setting
Yeah, in general, if you change a package, you need to update the PR so
it gets rebuilt.
It's described here:
http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html3.4.3. Package Revision Incrementing
Admittedly, it might not be something a beginner would easily find, but
on the other hand, the instructions assume you're doing the setup before
a first build where rebuilding the package wouldn't matter. On the
other hand, I guess the reason it happened in the first place was due to
the omission in the README, which by necessity could only be addressed
in the release notes for the BSP. So we probably need to add a note to
bump the PR to the addition in the release notes as well. Sound right?
Tom
Thanks,
JIm A
> Jim A
>
> Tom
>
> > NOTE: Running noexec task 4432 of 4436
(ID:
> >
>
715, /home/jim/poky/meta/recipes-kernel/linux/linux-yocto_3.0.bb,
> > do_package_write)
> > NOTE: package eglibc-locale-2.13-r16: task
> do_package_write_rpm:
> > Succeeded
> > NOTE: Running task 4433 of 4436 (ID:
> >
>
8, /home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs)
> > NOTE: Running noexec task 4434 of 4436
(ID:
> >
>
260, /home/jim/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
> > do_package_write)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Started
> > ERROR: Function 'do_rootfs' failed
> >
>
(see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > ERROR: Logfile of failure stored
> >
>
in: /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> > Log data follows:
> > | Generating solve db
> >
for /home/jim/poky/build/tmp/deploy/rpm/mymachine...
> > | total: 1 0.000000
MB
> 1.251276 secs
> > | fingerprint: 1179 0.007580
MB
> 0.225419 secs
> > | install: 393 0.000000
MB
> 0.467978 secs
> > | dbadd: 393 0.000000
MB
> 0.458049 secs
> > | dbget: 2413 0.000000
MB
> 0.002657 secs
> > | dbput: 393 1.816904
MB
> 0.387933 secs
> > | readhdr: 3931 3.623312
MB
> 0.007842 secs
> > | hdrload: 1965 5.352088
MB
> 0.015769 secs
> > | hdrget: 67287 0.000000
MB
> 0.025251 secs
> > | Generating solve db
>
for /home/jim/poky/build/tmp/deploy/rpm/core2...
> > | total: 1 0.000000
MB
> 30.690842 secs
> > | fingerprint: 16377 0.192190
MB
> 1.357263 secs
> > | install: 5459 0.000000
MB
> 9.185276 secs
> > | dbadd: 5459 0.000000
MB
> 8.997421 secs
> > | dbget: 61190 0.000000
MB
> 0.097393 secs
> > | dbput: 5459 27.436448
MB
> 8.057184 secs
> > | readhdr: 54591 55.326554
MB
> 0.216373 secs
> > | hdrload: 27777 84.106654
MB
> 0.241450 secs
> > | hdrget: 982855 0.000000
MB
> 0.367838 secs
> > | Generating solve db
>
for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000
MB
> 0.123502 secs
> > | fingerprint: 96 0.003258
MB
> 0.004244 secs
> > | install: 32 0.000000
MB
> 0.065233 secs
> > | dbadd: 32 0.000000
MB
> 0.062755 secs
> > | dbget: 585 0.000000
MB
> 0.000230 secs
> > | dbput: 32 0.259492
MB
> 0.039171 secs
> > | readhdr: 321 0.520536
MB
> 0.000570 secs
> > | hdrload: 160 0.772764
MB
> 0.001263 secs
> > | hdrget: 5288 0.000000
MB
> 0.002207 secs
> > | Generating solve db
>
for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000
MB
> 0.111927 secs
> > | fingerprint: 96 0.003258
MB
> 0.004173 secs
> > | install: 32 0.000000
MB
> 0.057706 secs
> > | dbadd: 32 0.000000
MB
> 0.055191 secs
> > | dbget: 585 0.000000
MB
> 0.000204 secs
> > | dbput: 32 0.259492
MB
> 0.034089 secs
> > | readhdr: 321 0.520536
MB
> 0.000673 secs
> > | hdrload: 160 0.772764
MB
> 0.001158 secs
> > | hdrget: 5288 0.000000
MB
> 0.001854 secs
> > | Processing locale-base-en-us...
> > | Processing locale-base-en-gb...
> > | Processing task-core-boot...
> > | Processing task-core-apps-console...
> > | Processing task-core-ssh-dropbear...
> > | Processing task-core-apps-x11-pimlico...
> > | Processing task-core-x11-sato...
> > | Processing zypper...
> > | Processing task-core-x11-base...
> > | Processing task-core-apps-x11-games...
> > | Processing task-core-apps-x11-core...
> > | Processing task-base-extended...
> > | Processing rpm...
> > | error: Failed dependencies:
> > | libva.so.1 is needed by
libegl1-1.8-r7.core2
> > | ERROR: Function 'do_rootfs' failed
> >
>
(see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Failed
> > ERROR: Task 8
> >
>
(/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs) failed with exit code '1'
> > ERROR:
>
'/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> > failed
> > jim@jim-ubuntu:~/poky/build$
> >
> >
>
>
>
>
>
