Re: build failure on crownbay with EMGD
Jim Abernathy
On Wed, Nov 9, 2011 at 2:43 PM, Tom Zanussi <tom.zanussi@...> wrote:
You should bump the PR of emgd-driver-bin_1.8.bb to get it to use the
On Wed, 2011-11-09 at 10:24 -0800, James Abernathy wrote:
>
>
> On Wed, Nov 9, 2011 at 12:56 PM, James Abernathy
> <jfabernathy@...> wrote:
>
>
> On Wed, Nov 9, 2011 at 12:51 PM, Tom Zanussi
> <tom.zanussi@...> wrote:
> On Wed, 2011-11-09 at 09:41 -0800, James Abernathy
> wrote:
> > In the past I've built the crownbay-noemgd
> successfully, using the
> > Development Manual Appendix A corrected instructions
> that have been
> > patched. I thought I'd try my hand at building the
> crownbay with EMGD
> > this time. Following the instructions in the
> Appendix A, but using
> > the opposite instructions related to EMGD, plus
> installing EMGD per
> > the instructions in the README file in the
> meta-crownbay directory, I
> > got a long way into the build, but failed toward the
> end in what looks
> > like a dependance issue. Can someone spot what I
> need to change???
> >
>
>
> Yes, you've hit the missing step added to the update
> release notes here:
>
> http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1
>
>
> 7. Remove the following unused file from the emgd
> binaries in order to
> avoid a packaging error at build-time:
> $ rm
> meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so
>
>
> This was an omission in the README, queued for the
> next edison point
> release.
>
> If I remember my MeeGo stuff, then removing this file will
> eliminate the ability to do Media decode acceleration??
>
>
> Not sure what it takes to get past this error. Just removing the file
> and rerunning bitbake gets the same error. Do I need
> to reset something before rerunning???
>
new contents i.e.
change
PR = "r7"
to
PR = "r8"
To
Okay, that fixed the issue. Now, how was I to know that? Is that a basic step in reruns? I'm guessing if I started from scratch and rm'ed the video file the first time it would have run with PR = "r7"?
Let me know what I should have read to know about the PR setting
Thanks,
JIm A
> Jim A
>
> Tom
>
> > NOTE: Running noexec task 4432 of 4436 (ID:
> >
> 715, /home/jim/poky/meta/recipes-kernel/linux/linux-yocto_3.0.bb,
> > do_package_write)
> > NOTE: package eglibc-locale-2.13-r16: task
> do_package_write_rpm:
> > Succeeded
> > NOTE: Running task 4433 of 4436 (ID:
> >
> 8, /home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs)
> > NOTE: Running noexec task 4434 of 4436 (ID:
> >
> 260, /home/jim/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
> > do_package_write)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Started
> > ERROR: Function 'do_rootfs' failed
> >
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > ERROR: Logfile of failure stored
> >
> in: /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> > Log data follows:
> > | Generating solve db
> > for /home/jim/poky/build/tmp/deploy/rpm/mymachine...
> > | total: 1 0.000000 MB
> 1.251276 secs
> > | fingerprint: 1179 0.007580 MB
> 0.225419 secs
> > | install: 393 0.000000 MB
> 0.467978 secs
> > | dbadd: 393 0.000000 MB
> 0.458049 secs
> > | dbget: 2413 0.000000 MB
> 0.002657 secs
> > | dbput: 393 1.816904 MB
> 0.387933 secs
> > | readhdr: 3931 3.623312 MB
> 0.007842 secs
> > | hdrload: 1965 5.352088 MB
> 0.015769 secs
> > | hdrget: 67287 0.000000 MB
> 0.025251 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/core2...
> > | total: 1 0.000000 MB
> 30.690842 secs
> > | fingerprint: 16377 0.192190 MB
> 1.357263 secs
> > | install: 5459 0.000000 MB
> 9.185276 secs
> > | dbadd: 5459 0.000000 MB
> 8.997421 secs
> > | dbget: 61190 0.000000 MB
> 0.097393 secs
> > | dbput: 5459 27.436448 MB
> 8.057184 secs
> > | readhdr: 54591 55.326554 MB
> 0.216373 secs
> > | hdrload: 27777 84.106654 MB
> 0.241450 secs
> > | hdrget: 982855 0.000000 MB
> 0.367838 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000 MB
> 0.123502 secs
> > | fingerprint: 96 0.003258 MB
> 0.004244 secs
> > | install: 32 0.000000 MB
> 0.065233 secs
> > | dbadd: 32 0.000000 MB
> 0.062755 secs
> > | dbget: 585 0.000000 MB
> 0.000230 secs
> > | dbput: 32 0.259492 MB
> 0.039171 secs
> > | readhdr: 321 0.520536 MB
> 0.000570 secs
> > | hdrload: 160 0.772764 MB
> 0.001263 secs
> > | hdrget: 5288 0.000000 MB
> 0.002207 secs
> > | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/all...
> > | total: 1 0.000000 MB
> 0.111927 secs
> > | fingerprint: 96 0.003258 MB
> 0.004173 secs
> > | install: 32 0.000000 MB
> 0.057706 secs
> > | dbadd: 32 0.000000 MB
> 0.055191 secs
> > | dbget: 585 0.000000 MB
> 0.000204 secs
> > | dbput: 32 0.259492 MB
> 0.034089 secs
> > | readhdr: 321 0.520536 MB
> 0.000673 secs
> > | hdrload: 160 0.772764 MB
> 0.001158 secs
> > | hdrget: 5288 0.000000 MB
> 0.001854 secs
> > | Processing locale-base-en-us...
> > | Processing locale-base-en-gb...
> > | Processing task-core-boot...
> > | Processing task-core-apps-console...
> > | Processing task-core-ssh-dropbear...
> > | Processing task-core-apps-x11-pimlico...
> > | Processing task-core-x11-sato...
> > | Processing zypper...
> > | Processing task-core-x11-base...
> > | Processing task-core-apps-x11-games...
> > | Processing task-core-apps-x11-core...
> > | Processing task-base-extended...
> > | Processing rpm...
> > | error: Failed dependencies:
> > | libva.so.1 is needed by libegl1-1.8-r7.core2
> > | ERROR: Function 'do_rootfs' failed
> >
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> > NOTE: package core-image-sato-1.0-r0: task
> do_rootfs: Failed
> > ERROR: Task 8
> >
> (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_rootfs) failed with exit code '1'
> > ERROR:
> '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> > failed
> > jim@jim-ubuntu:~/poky/build$
> >
> >
>
>
>
>
>