Re: build failure on crownbay with EMGD


Jim Abernathy
 



On Wed, Nov 9, 2011 at 12:56 PM, James Abernathy <jfabernathy@...> wrote:


On Wed, Nov 9, 2011 at 12:51 PM, Tom Zanussi <tom.zanussi@...> wrote:
On Wed, 2011-11-09 at 09:41 -0800, James Abernathy wrote:
> In the past I've built the crownbay-noemgd successfully, using the
> Development Manual Appendix A corrected instructions that have been
> patched.  I thought I'd try my hand at building the crownbay with EMGD
> this time.  Following the instructions in the Appendix A, but using
> the opposite instructions related to EMGD, plus installing EMGD per
> the instructions in the README file in the meta-crownbay directory, I
> got a long way into the build, but failed toward the end in what looks
> like a dependance issue.  Can someone spot what I need to change???
>

Yes, you've hit the missing step added to the update release notes here:

http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1


7. Remove the following unused file from the emgd binaries in order to
avoid a packaging error at build-time:
       $ rm
meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so


This was an omission in the README, queued for the next edison point
release.

If I remember my MeeGo stuff, then removing this file will eliminate the ability to do Media decode acceleration??
 
Not sure what it takes to get past this error. Just removing the file and rerunning bitbake gets the same error.  Do I need
to reset something before rerunning???
 
Jim A
 
Tom

> NOTE: Running noexec task 4432 of 4436 (ID:
> 715, /home/jim/poky/meta/recipes-kernel/linux/linux-yocto_3.0.bb,
> do_package_write)
> NOTE: package eglibc-locale-2.13-r16: task do_package_write_rpm:
> Succeeded
> NOTE: Running task 4433 of 4436 (ID:
> 8, /home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> do_rootfs)
> NOTE: Running noexec task 4434 of 4436 (ID:
> 260, /home/jim/poky/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
> do_package_write)
> NOTE: package core-image-sato-1.0-r0: task do_rootfs: Started
> ERROR: Function 'do_rootfs' failed
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> ERROR: Logfile of failure stored
> in: /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> Log data follows:
> | Generating solve db
> for /home/jim/poky/build/tmp/deploy/rpm/mymachine...
> |    total:               1      0.000000 MB      1.251276 secs
> |    fingerprint:      1179      0.007580 MB      0.225419 secs
> |    install:           393      0.000000 MB      0.467978 secs
> |    dbadd:             393      0.000000 MB      0.458049 secs
> |    dbget:            2413      0.000000 MB      0.002657 secs
> |    dbput:             393      1.816904 MB      0.387933 secs
> |    readhdr:          3931      3.623312 MB      0.007842 secs
> |    hdrload:          1965      5.352088 MB      0.015769 secs
> |    hdrget:          67287      0.000000 MB      0.025251 secs
> | Generating solve db for /home/jim/poky/build/tmp/deploy/rpm/core2...
> |    total:               1      0.000000 MB     30.690842 secs
> |    fingerprint:     16377      0.192190 MB      1.357263 secs
> |    install:          5459      0.000000 MB      9.185276 secs
> |    dbadd:            5459      0.000000 MB      8.997421 secs
> |    dbget:           61190      0.000000 MB      0.097393 secs
> |    dbput:            5459     27.436448 MB      8.057184 secs
> |    readhdr:         54591     55.326554 MB      0.216373 secs
> |    hdrload:         27777     84.106654 MB      0.241450 secs
> |    hdrget:         982855      0.000000 MB      0.367838 secs
> | Generating solve db for /home/jim/poky/build/tmp/deploy/rpm/all...
> |    total:               1      0.000000 MB      0.123502 secs
> |    fingerprint:        96      0.003258 MB      0.004244 secs
> |    install:            32      0.000000 MB      0.065233 secs
> |    dbadd:              32      0.000000 MB      0.062755 secs
> |    dbget:             585      0.000000 MB      0.000230 secs
> |    dbput:              32      0.259492 MB      0.039171 secs
> |    readhdr:           321      0.520536 MB      0.000570 secs
> |    hdrload:           160      0.772764 MB      0.001263 secs
> |    hdrget:           5288      0.000000 MB      0.002207 secs
> | Generating solve db for /home/jim/poky/build/tmp/deploy/rpm/all...
> |    total:               1      0.000000 MB      0.111927 secs
> |    fingerprint:        96      0.003258 MB      0.004173 secs
> |    install:            32      0.000000 MB      0.057706 secs
> |    dbadd:              32      0.000000 MB      0.055191 secs
> |    dbget:             585      0.000000 MB      0.000204 secs
> |    dbput:              32      0.259492 MB      0.034089 secs
> |    readhdr:           321      0.520536 MB      0.000673 secs
> |    hdrload:           160      0.772764 MB      0.001158 secs
> |    hdrget:           5288      0.000000 MB      0.001854 secs
> | Processing locale-base-en-us...
> | Processing locale-base-en-gb...
> | Processing task-core-boot...
> | Processing task-core-apps-console...
> | Processing task-core-ssh-dropbear...
> | Processing task-core-apps-x11-pimlico...
> | Processing task-core-x11-sato...
> | Processing zypper...
> | Processing task-core-x11-base...
> | Processing task-core-apps-x11-games...
> | Processing task-core-apps-x11-core...
> | Processing task-base-extended...
> | Processing rpm...
> | error: Failed dependencies:
> |     libva.so.1 is needed by libegl1-1.8-r7.core2
> | ERROR: Function 'do_rootfs' failed
> (see /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608 for further information)
> NOTE: package core-image-sato-1.0-r0: task do_rootfs: Failed
> ERROR: Task 8
> (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> do_rootfs) failed with exit code '1'
> ERROR: '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> failed
> jim@jim-ubuntu:~/poky/build$
>
>




Join yocto@lists.yoctoproject.org to automatically receive all group messages.