Hi,
On Tue, 2011-11-01 at 11:37 -0700, James Abernathy wrote:
I tried to duplicate the Yocto Project Decelopment Manual Appendix A
build of a Crownbay NOEMGD image, no changes just dulicate the
instructions. This is using the latest Yocto 1.1. I did get a long
way down the line, but had a fatal error in the last 2 steps.
The only change I had to make was related to A.5.2.4. The commit
string for the SRCREV_meta_pn was different on the
git.yoctoproject.org/cgit/cgi for the Meta commit so I used what I
found online. The first section of 126 task completed without error.
The next section of 4394 tasks failed on 4393. Not sure if the error
is obvious, but I wanted to run it by someone. Console error log
below:
Hmm, not sure what's going on here - I'm sure this example was verified
several times, but just to make sure, what you're doing is going through
'Appendix A. BSP Development Example' verbatim and getting this?
The SRCREVs in either case look ok for this, so that shouldn't be the
problem...
But let me go over the steps myself and see what I come up with - will
let you know either way...
Tom
NOTE: package core-image-sato-1.0-r0: task do_bootimg: Started
ERROR: Function 'build_boot_bin' failed
(see /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418 for further information)
ERROR: Logfile of failure stored
in: /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
Log data follows:
| install: cannot stat
`/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage': No
such file or directory
| ERROR: Function 'build_boot_bin' failed
(see /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418 for further information)
NOTE: package core-image-sato-1.0-r0: task do_bootimg: Failed
ERROR: Task 9
(/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
do_bootimg) failed with exit code '1'
ERROR: '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
failed
jim@jim-ubuntu-10:~/poky/yocto-build$
