Compile with ADT and recipe fails builds on target.

Ed Vidal

Hello All,

Trying to use ADT to compile a package.  The package compiles and installs on the target core-image-sato for the Raspberry Pi 2 B.  Also trying to create a recipe. see
recipe_gtkwave/gtkwave/ at
The recipe downloads the source code, unpacks and runs do_configure, but fails at
 ERROR: Function failed: do_qa_configure.

1.) "cd wkg/yocto/RaspberryPi2/poky/"

2.) ". oe-init-build-env"

3.) "bitbale core-image-sato -c populate_sdk"

4.) "sudo tmp/deploy/sdk/"

5.) "cd ~/"

6.) "tar xfz wkg/yocto/downloads/gtkwave-3.3.66.tar.gz"

7.) "cd gtkwave-3.3.66/"

8.) "source /opt/poky/1.8+snapshot/environment-setup-cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi"

9.a) "./configure ${CONFIGURE_FLAGS}"
checking for Tcl configuration... configure: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing

Should the ADT be able to find theses since they are located at
ls /opt/poky/1.8+snapshot/sysroots/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/usr/lib/
ls /opt/poky/1.8+snapshot/sysroots/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/usr/lib/
without have to set the path

9.b) "./configure ${CONFIGURE_FLAGS} --with-tcl=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2/usr/lib --with-tk=/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/sysroots/raspberrypi2/usr/lib"

This goes further with the following warning

config.status: executing depfiles commands
configure: WARNING: unrecognized options: --with-libtool-sysroot

Thanks in advance.
Edward Vidal Jr.
e-mail develone@...

Join to automatically receive all group messages.