-----Original Message-----
From: yocto-bounces@... [mailto:yocto-
bounces@...] On Behalf Of Alex J Lennon
Sent: Friday, March 07, 2014 7:30 AM
To: yocto@...
Subject: [yocto] Remote management of embedded devices

Hi,

I'm looking into remote management solutions for an upcoming headless
mesh edge router running Poky. I think, at least in the initial rollout we're
going to need something more than, say, a cron-based package update
facility.

I'm currently thinking of going down the route of a cloud based server
providing SSH port forwarding to the embedded devices, and then perhaps
putting some scripting together on top of that to enable monitoring,
configuration, and control.

This is similar to what we have running. We're using opkg for the package management system and allow firmware upgrade through the USB stick or through remote access. We have an SSH server for remote access, and each device has its own private key for access into the server. If the device is in the middle of an SSH session with the remote access server, we can then SSH into the device from our server if we want to do some deeper diagnostics on an issue with a device. We have separate HTTP server which each device queries to see if it needs to check in. So instead of having to do an ssh login each time to check if there's a firmware upgrade available, it just needs to do a HTTP GET to see if there's firmware available or if we want to check on its status.

The biggest issues we've had have been due to our network setup and handling upgrade both through the network and the USB stick. We are using "opkg upgrade --download-only" as the first step of the upgrade process to make sure that we don't do a partial upgrade. opkg-0.1.8 doesn't do --download-only for file:// sources; why download a file that is already on the filesystem? So I had to add a patch so it would download files from the USB stick. We also had an issue with DNS names because the server has a different name when the device finds it locally on our intranet then when it connects remotely, so we had to setup separate mirrors. Other than that it's been working pretty well.

I'd also love to hear other people's solutions to see if they have done something similar or came up with a different solution.

Regards,
Bryan

I was wondering if there are better solutions already supported by the Yocto
project which people might be using to good effect in production systems ?

Thanks,

Alex

_______________________________________________
yocto mailing list
yocto@...
https://lists.yoctoproject.org/listinfo/yocto