Hi, All,
This is the weekly test report for Yocto 1.1 M2 RC1 build. There are 2 new BLOCK bugs and 1 new NORMAL bug found in this testing. All BSP sato-sdk images have no bash built-in, which makes some bash based command not work. X server fails to start up on crownbay emgd and blacksand. And we find basic image build for qemux86 fails due to lack of locale-base-en-us. For old bugs, qemumips and qemuppc lsb images build still failed on autobuilder. mkswap issue during installation fixing patch has not been included in this build. The rpm/zypper install/removal consume disk space issue also exists.
For bug fixing, login.defs issue and no libXinerama.so for sudoku issue on jasperforest have been fixed.
Note: For different images, they are built against different commit/branch on autobuilder. So pls. check following “Commit Information” section for detailed information.
The test report is archieved @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report
Test Summary:
---------------------------------------
Test Result Summary |
Component | Target | Status | Comments |
BSP | SugarBay | GOOD | parport_pc probe fail of 00:0b |
CrownBay-emgd | BLOCK | Format swap partition failed; X server failed to start up when live boot |
JasperForest | GOOD | I/OAT DMA engine init failed; |
Blacksand | GOOD | Format swap partition failed. |
eMenlow | BLOCK | Standby failed; Format swap partition failed;X server failed to start up when live boot |
Beagleboard | GOOD | Everything runs well. |
Routerstationpro | GOOD | Everything runs well. |
Mpc8315e-rdb | GOOD | Everything runs well. |
QEMU | qemux86 | GOOD | No enough disk space |
qemux86-64 | GOOD | No enough disk space |
qemuarm | GOOD | Missing 'perl' command; Not enough disk space. |
qemuppc | Buggy | Missing 'perl' command; Not enough disk space; Unfs doesn't work. |
qemumips | GOOD | Missing 'perl' command; Not enough disk space. |
ADT | | Buggy | Unfs does not work with qemuppc; CVS build failed with mips toolchain. |
| | | |
| Critical bugs, or more than 50% test cases are blocked |
| Only Normal, Minor or Enhancement bugs, less than 10% test cases failed |
| Normal, Major and Critical bugs, and more than 10% test cases failed |
Detailed Test Result for each component |
Target | Total TCs | Not Run | Passed | Failed | Not testable (Blocked) |
Sugarbay Sato-SDK | 55 | 0 | 54 | 1 (bug 1187) | 0 |
Jasperforest LSB-SDK | 32 | 0 | 31 | 1 (bug 1188) | 0 |
n450 Sato-SDK | 55 | 0 | 34 | 1 (bug 1099) | 20(bug 1211) |
eMenlow Sato-SDK | 55 | 0 | 52 | 3 (bug 310, 631,1099) | 0 |
Crownbay Sato-SDK | 55 | 0 | 35 | 0 | 20(bug 1211) |
Beagleboard | 36 | 0 | 36 | 0 | 0 |
Routerstationpro | 31 | 0 | 31 | 0 | 0 |
Mpc8315e-rdb | 34 | 0 | 34 | 0 | 0 |
Qemux86-64 Sato | 28 | 0 | 27 | 1 (bug 1172) | 0 |
Qemux86-64 Sato-SDK | 31 | 0 | 31 | 0 | 0 |
Qemux86 Sato | 28 | 0 | 27 | 1 (bug 1172) | 0 |
Qemux86 Sato-SDK | 31 | 0 | 31 | 0 | 0 |
Qemumips Sato | 28 | 0 | 26 | 2 (bug 1171, 1172) | 0 |
Qemumips Sato-SDK | 31 | 0 | 31 | 0 | 0 |
Qemuppc Sato | 21 | 0 | 18 | 3 (bug 414, 1171, 1172) | 0 |
Qemuppc Sato-SDK | 24 | 0 | 23 | 1 (bug 414) | 0 |
Qemuarm Sato | 28 | 0 | 26 | 2 (bug 1171, 1172) | 0 |
Qemuarm Sato-SDK | 31 | 0 | 31 | 0 | 0 |
ADT | 6 | 0 | 4 | 2 (bug 414, 1195) | 0 |
Total | 640 | 0 | 582 | 18 | 40 |
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit Information
---------------------------------------
For Emenlow/Blacksand/Crownbay/toolchain:
Tree/Branch : Poky/master
Poky Commit id : ad2363278f0ea86fcf3464f8f6073d3a3d06be63
Meta Branch : master
Meta Commit id: 92fc07a5f1b98779806cdcc2341487ff5ea5a238
For Sugarbay/Jasperforest/qemux86/qemux86-64:
Tree/Branch : Poky/1.1_M2
Poky Commit id : ea518846b889a1bad2263d1cb49cb238a295a8e7
Meta Branch : master
Meta Commit id: 92fc07a5f1b98779806cdcc2341487ff5ea5a238
For qemuarm/mips/ppc/beagleboard/mpc8315e-rdb/routerstationpro:
Tree/Branch : Poky/master
Poky Commit id : 8511d1ec1bac699c742952e6fe4c306e1aaa2f9f
Issue Summary
---------------------------------------
Component | Bug Number | Target Milestone |
System & Core OS | Installation & Boot | New! Bug 1206: [qemux86] do_rootfs of core-image-basic fail due to lack of locale-base-en-us | --- |
Bug 1205:[blacksand/emenlow/crownbay] Format swap partition failed when install | 1.1 M2 |
Bug 1207:[Crownbay-emgd] X server failed to start up | 1.1 M2 |
New! Bug 1211 - [Blacksand] X server fail to start up | --- |
System Usage | Bug 1171: No enough disk space with qemu sato images | 1.1 M2 |
Bug 1172: Perl not exist in sato image | 1.1 M2 |
Bug 1174: [zypper/rpm] package install/removal costs lots of disk space | --- |
Others | Bug 1199: qemuppc lsb-sdk rootfs image build failed on autobuilder in nightly build 20110625-1 | 1.1 |
Bug 1200: qemumips lsb-sdk image build failed on autobuilder with nightly build 20110625-1. | --- |
New ! Bug 1214: [Emenlow/Blacksand/Crownbay/Sugarbay] No bash exist in sato-sdk image | --- |
ADT | Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS | 1.1 M3 |
Bug 1195: [mips toolchain] cvs configure fail with no cvs_cv_func_printf_ptr set | 1.1 M2 |
Verified Fixed Bug:
---------------------------------------
1. Bug 1190 - [japerforest] login.defs error when login system
2. Bug 1189 - [japerforest] No libXinerama.so for sudoku
Best Regards,
Jiajun
