Re: [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528


Saul Wold <sgw@...>
 

On 06/01/2011 12:03 PM, Liu, Song wrote:
I don’t see anyone reply to this. Which bug is opened for the
Beagleboard BSP build failure? It seem to be a critical issue.

Tom, shall you or someone else look into this?
Darren and I are looking into this, the 3 beagleboard bugs are
1) qt4-x11-free does not compile, which blocks -sdk images, there is a
gcc patch that I am working to integrate today (1130), which has been
know about and I had a partial work around that was rejected.

2) Wrong terminal is getting set someplace, Darren and Beth are looking
at that. (1131)

3) qemu-config blocks non-gplv3 build, this was know and a fix just went
into master.

more below.

Song

*From:*poky-bounces@...
[mailto:poky-bounces@...] *On Behalf Of *Xu, Jiajun
*Sent:* Tuesday, May 31, 2011 8:41 AM
*To:* poky@...; yocto@...
*Subject:* [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528

Hi all,

This is the weekly test report for Yocto 1.1 M1 RC2 build. There is no
new bugs found in this testing. 3 BLOCK issues found in RC1 are fixed.
The only one block issue is beagleboard build failed on autobuilder.
There are still 9 old open bugs. Grub installation fail on 3 intel BSPs.
Graphics testing on sugarbay is blocked.
One question about the sugarbay, was how was this tested before, or is
this a new requirement? If it's new then it's not really blocking, the
question is should mesa-demos be on all environments or just on targets
that need them? In which case this should be added to a sugarbay
specific build.

For bug fixing, the keyboard not work issue and toolchain not built out
issue are fixed. Meanwhile, the cvs compile issue is marked as INVALID
because it also fails on native. We also remove sudoku-savant compile
test in qemu because such error may be caused by limited memory in qemu.

If there is no new build for M1, QA will continue fullpass testing
against RC2.

*Test Summary*

*---------------------------------------*







*Test Result Summary*



*Component*



*Target*



*Status*



*Comments*



*BSP*



SugarBay



GOOD



Graphics testing is blocked; soft keyboard will be triggered with
terminal icon;



 



CrownBay



GOOD



Grub installation failed;



 



JasperForest



GOOD



Everything runs well



 



Blacksand



GOOD



Grub installation failed; S3 does not work;



 



eMenlow



GOOD



System installation failed; S3 does not work;



 



Beagleboard



BLOCK



Build failed



 



Routerstationpro



GOOD



Everything runs well



 



Mpc8315e-rdb



GOOD



Everything runs well



*QEMU*



qemux86



GOOD



Everything runs well



 



qemux86-64



GOOD



Everything runs well



 



qemuarm



GOOD



Everything runs well



 



qemuppc



GOOD



unfs does not work with qemuppc



 



qemumips



GOOD



Everything runs well



*ADT*



 



Buggy



unfs does not work with qemuppc





**

 



Critical bugs, more than 50% test cases are blocked



 



Only Normal, Minor or Enhancement bugs, less than 10% test cases failed



 



Normal, Major and Critical bugs, more than 10% test cases failed





*Detailed Test Result for each component*



*Target*



*Total TCs***



*Not Run*



*Passed***



*Failed***



*Not testable (Blocked)***



*Sugarbay Sato-SDK*



55



0



53



1 (bug 1101)



1 (bug 1112)



*Crownbay Sato-SDK*



54



0



49



1 (bug 1099)



4



*Jasperforest LSB-SDK*



31



0



31



0



0



*n450 Sato-SDK*



54



0



48



2 (bug 613, 1099)



4



*eMenlow Sato-SDK*



54



0



48



2 (bug 1099, 503)



4



*Routerstationpro Sato-SDK*



29



0



29



0



0



*Mpc8315e-rdb Sato-SDK*



30



0



26



4 (bug 766)



0



*Qemux86-64 Sato*



27



0



27



0



0



*Qemux86-64 Sato-SDK*



30



0



30



0



0



*Qemux86 Sato*



27



0



27



0



0



*Qemux86 Sato-SDK*



30



0



30



0



0



*Qemumips Sato*



26



0



26



0



0



*Qemumips Sato-SDK*



32



0



32



0



0



*Qemuppc Sato*



20



0



19



0



1 (bug 414)



*Qemuppc Sato-SDK*



26



0



25



0



1 (bug 414)



*Qemuarm Sato*



26



0



26



0



0



*Qemuarm Sato-SDK*



32



0



32



0



0



*ADT*



6



0



5



1 (bug 414)



0



*Total*



589



0



563



11



15





**






* You can check the detailed test result in attachment for each target.

** The failed/blocked case number is listed with failed cases’ bug number.

*Commit Information*

*---------------------------------------*

Tree/Branch: Poky/1.1_M1

Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b

Meta Branch: 1.1_M1

Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298

*Issue Summary*

*---------------------------------------*

*Component*



*Bug Number*



*Target Milestone*

*System & Core OS*



*Installation & Boot*



Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
live image



1.1 M2

*Power Mangement*



Bug 613: [Blacksand]system cannot enter S3 standby mode



1.1

Bug 503: [emenlow] system cannot enter S3 standby mode



1.1

*Others*



Bug 1101: keyboard pop up when clicking terminal icon



1.0 M2

Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand



1.1 M2

Bug 1097: The mouse can not click accurate to the icons in qemumips X



1.1 M2

*Graphics*



Bug 1112: [sugarbay] mesa-demos should be added into sato image for
graphics testing



Not specified

Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
due to libsdl.so



1.1

*Multimedia*



Works well in sugarbay/n450/eMenlow/crownbay



 

*ADT*



Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS



1.1 M3

Verified Fixed Bugs:

1.Bug 1100 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1100>:
[emenlow/crownbay-noemgd] X window could not start up with sato-sdk image

2.Bug 1108 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1108>:
keyboard could not work in qemux86/x86-64

3.Bug 1093 <http://bugzilla.pokylinux.org/show_bug.cgi?id=1093>:
meta-toolchain-gmae: eglibc fails to build with 4.6

Best Regards,

Jiajun



_______________________________________________
poky mailing list
poky@...
https://lists.yoctoproject.org/listinfo/poky

Join yocto@lists.yoctoproject.org to automatically receive all group messages.