Date   

Re: [PATCH] libvirt: uprev v6.3 -> v7.2

Bruce Ashfield
 

On Fri, Apr 9, 2021 at 3:07 PM Bruce Ashfield <bruce.ashfield@...> wrote:

On Wed, Apr 7, 2021 at 5:23 AM Xu, Yanfei <yanfei.xu@...> wrote:



On 4/7/21 8:35 AM, Bruce Ashfield wrote:
[Please note: This e-mail is from an EXTERNAL e-mail address]

In message: [meta-virtualization][PATCH] libvirt: uprev v6.3 -> v7.2
on 02/04/2021 Xu, Yanfei wrote:

From: Yanfei Xu <yanfei.xu@...>

This upgrade spans 9 small release. The detailed realese logs could
refer to: https://gitlab.com/libvirt/libvirt/-/blob/master/NEWS.rst

Libvirt's buildsystem has changed to meson, So this upgrade drop some
obsolete patches applied to makefile.

Due to libvirt's meson currently doesn't support to explicit the runtime
binaries path. I made a patch which is
0001-meson-add-options-to-explicit-binaries-path.patch for solving the
problem.
We've tranditionally had runtime issues each time libvirt was
uprev'd.
Yes. I saw there were some ancient patches...


Can you summarize the testing that you did after the upgrade ?
OK. I did the testing with our libvirt testcase and ovs testcase.
The summary is as follow:

libvirt_test (keyword: ) test results:
*1 Run libvirt_test testing(do_test1) PASS
*2 Check result (virsh_local_capabilities) PASS
*3 Check result (virsh_local_domcapabilities) PASS
*4 Check result (virsh_local_freecell) PASS
*5 Check result (virsh_local_help) PASS
*6 Check result (virsh_local_hostname) PASS
*7 Check result (virsh_local_iface-begin) PASS
*8 Check result (virsh_local_iface-commit) PASS
*9 Check result (virsh_local_iface-list) PASS
*10 Check result (virsh_local_list) PASS
*11 Check result (virsh_local_maxvcpus) PASS
*12 Check result (virsh_local_net-list) PASS
*13 Check result (virsh_local_nodecpumap) PASS
*14 Check result (virsh_local_nodecpustats) PASS
*15 Check result (virsh_local_nodedev-list) PASS
*16 Check result (virsh_local_nodeinfo) PASS
*17 Check result (virsh_local_node-memory-tune) PASS
*18 Check result (virsh_local_nodememstats) PASS
*19 Check result (virsh_local_nwfilter-binding-list) PASS
*20 Check result (virsh_local_nwfilter-list) PASS
*21 Check result (virsh_local_pool-capabilities) PASS
*22 Check result (virsh_local_pool-list) PASS
*23 Check result (virsh_local_pwd) PASS
*24 Check result (virsh_local_secret-list) PASS
*25 Check result (virsh_local_sysinfo) PASS
*26 Check result (virsh_local_uri) PASS
*27 Check result (virsh_local_version) PASS

openvswitch_vm2vm (keyword: qemux86) test results:
*1 openvswitch_vm2vm testing(do_test1) PASS
*2 Check result (ovs_vm2vm_boot_guest1) PASS
*3 Check result (ovs_vm2vm_boot_guest2) PASS
*4 Check result (ovs_vm2vm_netperf_test) PASS
*5 Check result (ovs_vm2vm_destroy_guest1) PASS
*6 Check result (ovs_vm2vm_destroy_guest2) PASS
*7 check testcase call trace(do_check_call_trace) PASS
Thanks, this helps.

The patch came through corrupted, and I fixed it up locally and then
added your test summary to the commit.

But it failed to build in my configuration:

| Library xentoollog found: YES
| Header <libxl.h> has symbol "LIBXL_DOMAIN_TYPE_PVH" : YES
| Checking if "lxc support" compiles: YES
|
| ../libvirt-7.2.0/meson.build:1725:61: ERROR: Program or command
'getent' not found or not executable
|
I realize that HOSTTOOLS_NONFATAL += "getent" is set, but it doesn't
help if meson is failing config.

Bruce


I'm building tip of tree for everything, qemux86-64

Bruce



Thanks,
Yanfei


Bruce


Signed-off-by: Yanfei Xu <yanfei.xu@...>
---
recipes-extended/libvirt/libvirt-python.inc | 4 +-
...drop-unnecessary-libgnu.la-reference.patch | 31 ----
...dd-options-to-explicit-binaries-path.patch | 86 ++++++++++
.../libvirt/0001-to-fix-build-error.patch | 47 -----
...-search-for-rpc-rpc.h-in-the-sysroot.patch | 34 ----
.../libvirt/install-missing-file.patch | 50 ------
...read-safety-in-lxc-callback-handling.patch | 63 -------
...virt-use-pkg-config-to-locate-libcap.patch | 43 -----
.../libvirt/qemu-fix-crash-in-qemuOpen.patch | 39 -----
.../libvirt/libvirt/runptest.patch | 116 -------------
...t-net-rpc-to-virt-host-validate-when.patch | 91 ----------
.../{libvirt_6.3.0.bb => libvirt_7.2.0.bb} | 161 ++++++------------
12 files changed, 141 insertions(+), 624 deletions(-)
delete mode 100644 recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
create mode 100644 recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
delete mode 100644 recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
delete mode 100644 recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
delete mode 100644 recipes-extended/libvirt/libvirt/install-missing-file.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
delete mode 100644 recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
delete mode 100644 recipes-extended/libvirt/libvirt/runptest.patch
delete mode 100644 recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
rename recipes-extended/libvirt/{libvirt_6.3.0.bb => libvirt_7.2.0.bb} (69%)

diff --git a/recipes-extended/libvirt/libvirt-python.inc b/recipes-extended/libvirt/libvirt-python.inc
index bcd76572..0c661af8 100644
--- a/recipes-extended/libvirt/libvirt-python.inc
+++ b/recipes-extended/libvirt/libvirt-python.inc
@@ -17,8 +17,8 @@ FILES_${PN}-python = "${bindir}/* ${libdir}/* ${libdir}/${PYTHON_DIR}/*"

SRC_URI += "http://libvirt.org/sources/python/libvirt-python-${PV}.tar.gz;name=libvirt_python"

-SRC_URI[libvirt_python.md5sum] = "4cf898350ee9a47f94986d402c153bdb"
-SRC_URI[libvirt_python.sha256sum] = "c772421ecc144f098f4ab15db700c62db9b9e6e76b876217edcfd62e9ce02750"
+SRC_URI[libvirt_python.md5sum] = "19bf22414a43d358581b9259b52047a7"
+SRC_URI[libvirt_python.sha256sum] = "c0c3bac54c55622e17927b09cd9843869600d71842fb072c99491fe2608dcee7"

export LIBVIRT_API_PATH = "${S}/docs/libvirt-api.xml"
export LIBVIRT_CFLAGS = "-I${S}/include"
diff --git a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch b/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
deleted file mode 100644
index f02a5d64..00000000
--- a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 30a056069cb35804434fb036e51ae97f33c02025 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Sat, 7 Mar 2020 21:36:27 -0500
-Subject: [PATCH] build: drop unnecessary libgnu.la reference
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-
----
- tools/Makefile.am | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 2a0a989..93fe283 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -168,7 +168,6 @@ virt_host_validate_LDADD = \
-
- if WITH_GNUTLS
- virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
-@@ -270,7 +269,6 @@ BUILT_SOURCES =
-
- if WITH_GNUTLS
- virsh_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
diff --git a/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
new file mode 100644
index 00000000..4c545d4a
--- /dev/null
+++ b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
@@ -0,0 +1,86 @@
+From 2e061ccf093063267277893cd5cacc9e7188c629 Mon Sep 17 00:00:00 2001
+From: Yanfei Xu <yanfei.xu@...>
+Date: Thu, 25 Mar 2021 16:24:04 +0800
+Subject: [PATCH] meson: add options to explicit binaries path
+
+In cross compile evironment, path of binaries is possiblely different
+between target and host. Let's add options to explicit binaries path
+to solve this problem.
+
+Upstream-Status: Pending
+
+Signed-off-by: Yanfei Xu <yanfei.xu@...>
+---
+ meson.build | 18 ++++++++++++------
+ meson_options.txt | 23 +++++++++++++++++++++++
+ 2 files changed, 35 insertions(+), 6 deletions(-)
+
+diff --git a/meson.build b/meson.build
+index 369548f127..6c93be8e4b 100644
+--- a/meson.build
++++ b/meson.build
+@@ -943,18 +943,24 @@ optional_programs = [
+ 'udevadm',
+ ]
+
++# if -Dxxx-path option is found, use that. Otherwise, check in $PATH,
++# /usr/sbin, /sbin, and fall back to the default from middle column.
+ foreach name : optional_programs
+- prog = find_program(name, required: false, dirs: libvirt_sbin_path)
+ varname = name.underscorify()
+- if prog.found()
+- prog_path = prog.path()
++ prog_path = get_option(name + '-path')
++ if prog_path != ''
++ message('Using @1@ for @0@'.format(name, prog_path))
+ else
+- prog_path = name
++ prog = find_program(name, required: false, dirs: libvirt_sbin_path)
++ if prog.found()
++ prog_path = prog.path()
++ else
++ prog_path = name
++ endif
++ set_variable('@0@_prog'.format(varname), prog)
+ endif
+-
+ conf.set_quoted(varname.to_upper(), prog_path)
+ conf.set_quoted('@0@_PATH'.format(varname.to_upper()), prog_path)
+- set_variable('@0@_prog'.format(varname), prog)
+ endforeach
+
+
+diff --git a/meson_options.txt b/meson_options.txt
+index e5d79c2b6b..f06f46c7bb 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -102,3 +102,26 @@ option('numad', type: 'feature', value: 'auto', description: 'use numad to manag
+ option('pm_utils', type: 'feature', value: 'auto', description: 'use pm-utils for power management')
+ option('sysctl_config', type: 'feature', value: 'auto', description: 'Whether to install sysctl configs')
+ option('tls_priority', type: 'string', value: 'NORMAL', description: 'set the default TLS session priority string')
++
++
++option('addr2line-path', type : 'string', description : 'path to addr2line')
++option('augparse-path', type : 'string', description : 'path to augparse')
++option('dmidecode-path', type : 'string', description : 'path to dmidecode')
++option('dnsmasq-path', type : 'string', description : 'path to dnsmasq')
++option('ebtables-path', type : 'string', description : 'path to ebtables')
++option('flake8-path', type : 'string', description : 'path to flake8')
++option('ip-path', type : 'string', description : 'path to ip')
++option('ip6tables-path', type : 'string', description : 'path to ip6tables')
++option('iptables-path', type : 'string', description : 'path to iptables')
++option('iscsiadm-path', type : 'string', description : 'path to iscsiadm')
++option('mdevctl-path', type : 'string', description : 'path to mdevctl')
++option('mm-ctl-path', type : 'string', description : 'path to mm-ctl')
++option('modprobe-path', type : 'string', description : 'path to modprobe')
++option('ovs-vsctl-path', type : 'string', description : 'path to ovs-vsctl')
++option('pdwtags-path', type : 'string', description : 'path to pdwtags')
++option('radvd-path', type : 'string', description : 'path to radvd')
++option('rmmod-path', type : 'string', description : 'path to rmmod')
++option('scrub-path', type : 'string', description : 'path to scrub')
++option('tc-path', type : 'string', description : 'path to tc')
++option('udevadm-path', type : 'string', description : 'path to udevadm')
++
+--
+2.27.0
+
diff --git a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch b/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
deleted file mode 100644
index b0148e5c..00000000
--- a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 3566bcacaa6408fb8f655d1749a20b2f30e0c765 Mon Sep 17 00:00:00 2001
-From: Lei Maohui <leimaohui@...>
-Date: Fri, 31 Jul 2015 03:17:07 +0900
-Subject: [PATCH] to fix build error
-
-The error likes as following
-
-| Generating internals/command.html.tmp
-| /bin/sh: line 3: internals/command.html.tmp: No such file or directory
-| rm: Generating internals/locking.html.tmp
-| cannot remove `internals/command.html.tmp': No such file or directory
-| make[3]: *** [internals/command.html.tmp] Error 1
-| make[3]: *** Waiting for unfinished jobs....
-
-Signed-off-by: Lei Maohui <leimaohui@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- docs/Makefile.am | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/docs/Makefile.am b/docs/Makefile.am
-index ce3d296..2c8180f 100644
---- a/docs/Makefile.am
-+++ b/docs/Makefile.am
-@@ -366,7 +366,7 @@ EXTRA_DIST= \
- aclperms.htmlinc \
- $(schema_DATA)
-
--acl_generated = aclperms.htmlinc
-+acl.html:: $(srcdir)/aclperms.htmlinc
-
- aclperms.htmlinc: $(top_srcdir)/src/access/viraccessperm.h \
- $(top_srcdir)/scripts/genaclperms.py Makefile.am
-@@ -432,8 +432,7 @@ manpages/%.html.in: manpages/%.rst
- $(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
- $(RST2HTML) --strict $< > $@ || { rm $@ && exit 1; }
-
--%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl \
-- $(acl_generated)
-+%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl
- $(AM_V_GEN)name=`echo $@ | sed -e 's/.tmp//'`; \
- genhtmlin=`echo $@ | sed -e 's/.tmp/.in/'`; \
- rst=`echo $@ | sed -e 's/.html.tmp/.rst/'`; \
diff --git a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch b/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
deleted file mode 100644
index 395d5610..00000000
--- a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 79f5975db01af0599860ccca7ef44b0e27105a04 Mon Sep 17 00:00:00 2001
-From: Mark Asselstine <mark.asselstine@...>
-Date: Thu, 10 May 2018 12:05:04 -0400
-Subject: [PATCH] configure.ac: search for rpc/rpc.h in the sysroot
-
-We want to avoid host contamination and use the sysroot as the base
-directory for our search so add the '=' the the '-I' when searching
-for libtirpc's rpc.h header.
-
-Upstream-Status: Inappropriate [old release]
-
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-xdr.m4 | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/m4/virt-xdr.m4 b/m4/virt-xdr.m4
-index 8375415..12b51f7 100644
---- a/m4/virt-xdr.m4
-+++ b/m4/virt-xdr.m4
-@@ -30,10 +30,10 @@ AC_DEFUN([LIBVIRT_CHECK_XDR], [
- ])
- with_xdr="yes"
-
-- dnl Recent glibc requires -I/usr/include/tirpc for <rpc/rpc.h>
-+ dnl Recent glibc requires -I=/usr/include/tirpc for <rpc/rpc.h>
- old_CFLAGS=$CFLAGS
- AC_CACHE_CHECK([where to find <rpc/rpc.h>], [lv_cv_xdr_cflags], [
-- for add_CFLAGS in '' '-I/usr/include/tirpc' 'missing'; do
-+ for add_CFLAGS in '' '-I=/usr/include/tirpc' 'missing'; do
- if test x"$add_CFLAGS" = xmissing; then
- lv_cv_xdr_cflags=missing; break
- fi
diff --git a/recipes-extended/libvirt/libvirt/install-missing-file.patch b/recipes-extended/libvirt/libvirt/install-missing-file.patch
deleted file mode 100644
index 6aa36df8..00000000
--- a/recipes-extended/libvirt/libvirt/install-missing-file.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From aa75f5136066d239d48a21373b3d96ee12378e8d Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 17:24:17 +0800
-Subject: [PATCH] Install missing conf file
-
-openvzutilstest.conf file is needed by openvzutilstest test.
-
-Upstream-Status: Inapproriate
-
-Signed-off-by: Catalin Enache <catalin.enache@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index 4a808dd..0c3e799 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -173,6 +173,7 @@ EXTRA_DIST = \
- $(NULL)
-
- test_helpers = commandhelper ssh
-+test_misc =
- test_programs = virshtest sockettest \
- virhostcputest virbuftest \
- commandtest seclabeltest \
-@@ -311,6 +312,7 @@ endif WITH_LXC
-
- if WITH_OPENVZ
- test_programs += openvzutilstest
-+test_misc += openvzutilstest.conf
- endif WITH_OPENVZ
-
- if WITH_ESX
-@@ -1551,7 +1553,7 @@ endif ! WITH_LINUX
-
- buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-
--PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+PTESTS = $(TESTS) $(test_helpers) $(test_misc) test-lib.sh virschematest
-
- install-ptest:
- list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
diff --git a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch b/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
deleted file mode 100644
index 558d5ef6..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From ad5d9cee87357f9f38f62583119606ef95ba10df Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@...>
-Date: Fri, 24 May 2013 16:46:00 +0300
-Subject: [PATCH] Fix thread safety in LXC callback handling
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@...>
----
- src/lxc/lxc_process.c | 18 +++++++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
-diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
-index aaa81a7..0eadc67 100644
---- a/src/lxc/lxc_process.c
-+++ b/src/lxc/lxc_process.c
-@@ -609,8 +609,13 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- virLXCProtocolExitStatus status,
- virDomainObjPtr vm)
- {
-+ virLXCDriverPtr driver = lxc_driver;
- virLXCDomainObjPrivatePtr priv = vm->privateData;
-
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
- switch (status) {
- case VIR_LXC_PROTOCOL_EXIT_STATUS_SHUTDOWN:
- priv->stopReason = VIR_DOMAIN_EVENT_STOPPED_SHUTDOWN;
-@@ -628,6 +633,8 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- }
- VIR_DEBUG("Domain shutoff reason %d (from status %d)",
- priv->stopReason, status);
-+
-+ virObjectUnlock(vm);
- }
-
- /* XXX a little evil */
-@@ -636,12 +643,21 @@ static void virLXCProcessMonitorInitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- pid_t initpid,
- virDomainObjPtr vm)
- {
-- virLXCDomainObjPrivatePtr priv = vm->privateData;
-+ virLXCDriverPtr driver = lxc_driver;
-+ virLXCDomainObjPrivatePtr priv;
-+
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
-+ priv = vm->privateData;
- priv->initpid = initpid;
- virDomainAuditInit(vm, initpid);
-
- if (virDomainSaveStatus(lxc_driver->caps, lxc_driver->stateDir, vm) < 0)
- VIR_WARN("Cannot update XML with PID for LXC %s", vm->def->name);
-+
-+ virObjectUnlock(vm);
- }
-
- static virLXCMonitorCallbacks monitorCallbacks = {
---
-1.7.11.7
-
diff --git a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch b/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
deleted file mode 100644
index 87b55915..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 94bd514e1b6e602a48285db94e65050f8f0c2585 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Wed, 8 Apr 2015 13:03:03 -0400
-Subject: [PATCH] libvirt: use pkg-config to locate libcap
-
-libvirt wants to use pcap-config to locate the exisence and location
-of libpcap. oe-core stubs this script and replaces it with pkg-config,
-which can lead to the host pcap-config triggering and either breaking
-the build or introducing host contamination.
-
-To fix this issue, we patch configure to use 'pkg-config libcap' to
-locate the correct libraries.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[MA: Update to apply agains v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-libpcap.m4 | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/m4/virt-libpcap.m4 b/m4/virt-libpcap.m4
-index 605c2fd..e0ab018 100644
---- a/m4/virt-libpcap.m4
-+++ b/m4/virt-libpcap.m4
-@@ -23,14 +23,14 @@ AC_DEFUN([LIBVIRT_ARG_LIBPCAP], [
-
- AC_DEFUN([LIBVIRT_CHECK_LIBPCAP], [
- LIBPCAP_REQUIRED="1.5.0"
-- LIBPCAP_CONFIG="pcap-config"
-+ LIBPCAP_CONFIG="pkg-config libpcap"
- LIBPCAP_CFLAGS=""
- LIBPCAP_LIBS=""
-
- if test "x$with_libpcap" != "xno"; then
- case $with_libpcap in
-- ''|yes|check) LIBPCAP_CONFIG="pcap-config" ;;
-- *) LIBPCAP_CONFIG="$with_libpcap/bin/pcap-config" ;;
-+ ''|yes|check) LIBPCAP_CONFIG="pkg-config libpcap" ;;
-+ *) LIBPCAP_CONFIG="$with_libpcap/bin/pkg-config libpcap" ;;
- esac
- AS_IF([test "x$LIBPCAP_CONFIG" != "x"], [
- AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
diff --git a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch b/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
deleted file mode 100644
index 3cf9e839..00000000
--- a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 74bff2509080912ea8abf1de8fd95fa2412b659a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=A1n=20Tomko?= <jtomko@...>
-Date: Thu, 11 Apr 2013 11:37:25 +0200
-Subject: [PATCH] qemu: fix crash in qemuOpen
-
-commit 74bff2509080912ea8abf1de8fd95fa2412b659a from upsteam
-git://libvirt.org/libvirt.git
-
-If the path part of connection URI is not present, cfg is used
-unitialized.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=950855
----
- src/qemu/qemu_driver.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
-index 2c0d7d1..0d41e39 100644
---- a/src/qemu/qemu_driver.c
-+++ b/src/qemu/qemu_driver.c
-@@ -1026,6 +1026,7 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-+ cfg = virQEMUDriverGetConfig(qemu_driver);
- if (conn->uri->path == NULL) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("no QEMU URI path given, try %s"),
-@@ -1033,7 +1034,6 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-- cfg = virQEMUDriverGetConfig(qemu_driver);
- if (cfg->privileged) {
- if (STRNEQ(conn->uri->path, "/system") &&
- STRNEQ(conn->uri->path, "/session")) {
---
-1.7.1
-
diff --git a/recipes-extended/libvirt/libvirt/runptest.patch b/recipes-extended/libvirt/libvirt/runptest.patch
deleted file mode 100644
index f6bc7736..00000000
--- a/recipes-extended/libvirt/libvirt/runptest.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d210838a4433dd254c1a11b08b804ebe9ff5f378 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 10:20:47 +0800
-Subject: [PATCH] Add 'install-ptest' rule
-
-Change TESTS_ENVIRONMENT to allow running outside build dir.
-
-Upstream-status: Pending
-Signed-off-by: Mihaela Sendrea <mihaela.sendrea@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Allow separate source and build dirs]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ZH: add missing test_helper files]
-Signed-off-by: He Zhe <zhe.he@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 68 +++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 60 insertions(+), 8 deletions(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index ada5b8f..4a808dd 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -28,11 +28,13 @@ AM_CPPFLAGS = \
-
- WARN_CFLAGS += $(RELAXED_FRAME_LIMIT_CFLAGS)
-
-+PTEST_DIR ?= $(libdir)/libvirt/ptest
-+
- AM_CFLAGS = \
-- -Dabs_builddir="\"$(abs_builddir)\"" \
-- -Dabs_top_builddir="\"$(abs_top_builddir)\"" \
-- -Dabs_srcdir="\"$(abs_srcdir)\"" \
-- -Dabs_top_srcdir="\"$(abs_top_srcdir)\"" \
-+ -Dabs_builddir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_builddir="\"$(PTEST_DIR)\"" \
-+ -Dabs_srcdir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_srcdir="\"$(PTEST_DIR)\"" \
- $(LIBXML_CFLAGS) \
- $(GLIB_CFLAGS) \
- $(LIBNL_CFLAGS) \
-@@ -474,10 +476,10 @@ TESTS = $(test_programs) \
-
- VIR_TEST_EXPENSIVE ?= $(VIR_TEST_EXPENSIVE_DEFAULT)
- TESTS_ENVIRONMENT = \
-- abs_top_builddir="$(abs_top_builddir)" \
-- abs_top_srcdir="$(abs_top_srcdir)" \
-- abs_builddir="$(abs_builddir)" \
-- abs_srcdir="$(abs_srcdir)" \
-+ abs_top_builddir="$(PTEST_DIR)" \
-+ abs_top_srcdir="$(PTEST_DIR)" \
-+ abs_builddir="$(PTEST_DIR)/tests" \
-+ abs_srcdir="$(PTEST_DIR)/tests" \
- LIBVIRT_AUTOSTART=0 \
- LC_ALL=C \
- VIR_TEST_EXPENSIVE=$(VIR_TEST_EXPENSIVE) \
-@@ -1547,4 +1549,54 @@ else ! WITH_LINUX
- EXTRA_DIST += virscsitest.c
- endif ! WITH_LINUX
-
-+buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-+
-+PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+
-+install-ptest:
-+ list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
-+ install -d $(DEST_DIR)/tools
-+ @(if [ -d ../tools/.libs ] ; then cd ../tools/.libs; fi; \
-+ install * $(DEST_DIR)/tools)
-+ install -d $(DEST_DIR)/src/network
-+ cp $(top_srcdir)/src/network/*.xml $(DEST_DIR)/src/network
-+ install -d $(DEST_DIR)/src/cpu_map
-+ cp $(top_srcdir)/src/cpu_map/*.xml $(DEST_DIR)/src/cpu_map
-+ install ../src/libvirt_iohelper $(DEST_DIR)/src
-+ install -D ../src/libvirtd $(DEST_DIR)/src/libvirtd
-+ install -d $(DEST_DIR)/src/remote
-+ install -D $(top_srcdir)/../build/src/remote/libvirtd.conf $(DEST_DIR)/src/remote/libvirtd.conf
-+ install -d $(DEST_DIR)/src/remote/.libs
-+ @(if [ -d ../src/remote/.libs ] ; then cd ../src/remote/.libs; fi; \
-+ install * $(DEST_DIR)/src/remote/.libs)
-+ install -d $(DEST_DIR)/src/.libs
-+ @(if [ -d ../src/.libs ] ; then cd ../src/.libs; fi; \
-+ install * $(DEST_DIR)/src/.libs)
-+ install -d $(DEST_DIR)/docs/schemas
-+ cp $(top_srcdir)/docs/schemas/*.rng $(DEST_DIR)/docs/schemas
-+ cp -r $(top_srcdir)/build-aux $(DEST_DIR)
-+ install -d $(DEST_DIR)/examples/xml
-+ cp -r $(top_srcdir)/examples/xml/test $(DEST_DIR)/examples/xml
-+ install -d $(DEST_DIR)/tests/.libs
-+ find . -type d -name "*xml2xml*" -exec cp -r {} $(DEST_DIR)/tests \;
-+ find . -type d -name "*data" -exec cp -r {} $(DEST_DIR)/tests \;
-+ @(for file in $(PTESTS); do \
-+ if [ -f .libs/$$file ]; then \
-+ install .libs/$$file $(DEST_DIR)/tests; \
-+ elif [ -f $(srcdir)/$$file ]; then \
-+ install $(srcdir)/$$file $(DEST_DIR)/tests; \
-+ else \
-+ install $(builddir)/$$file $(DEST_DIR)/tests; \
-+ fi; \
-+ done;)
-+ @(if [ -d .libs ]; then install .libs/*.so $(DEST_DIR)/tests/.libs; fi;)
-+ cp ../config.h $(DEST_DIR)
-+ cp Makefile $(DEST_DIR)/tests
-+ sed -i -e 's/^Makefile:/_Makefile:/' $(DEST_DIR)/tests/Makefile
-+ cp ../Makefile $(DEST_DIR)
-+ sed -i -e 's|^Makefile:|_Makefile:|' $(DEST_DIR)/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/tests/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/Makefile
-+ sed -i -e 's|^\(.*\.log:\) \(.*EXEEXT.*\)|\1|g' $(DEST_DIR)/tests/Makefile
-+
- CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
diff --git a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch b/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
deleted file mode 100644
index bb500fde..00000000
--- a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 7dc21edd851b260485b432c096f8e90f6fa07778 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Tue, 7 May 2019 15:26:32 +0800
-Subject: [PATCH] tools: add libvirt-net-rpc to virt-host-validate when TLS is
- enabled
-
-When gnu-tls is enabled for libvirt references to virNetTLSInit are
-generated in libvirt. Any binaries linking against libvirt, must also
-link against libvirt-net-rpc which provides the implementation.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ddu: rebase to v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- examples/Makefile.am | 20 ++++++++++++++++++++
- tools/Makefile.am | 12 ++++++++++++
- 2 files changed, 32 insertions(+)
-
-diff --git a/examples/Makefile.am b/examples/Makefile.am
-index ad635bd..a94f41d 100644
---- a/examples/Makefile.am
-+++ b/examples/Makefile.am
-@@ -74,6 +74,10 @@ LDADD = \
- $(top_builddir)/src/libvirt-admin.la \
- $(NULL)
-
-+if WITH_GNUTLS
-+LDADD += $(top_builddir)/src/libvirt-net-rpc.la
-+endif
-+
- noinst_PROGRAMS = \
- c/admin/client_close \
- c/admin/client_info \
-@@ -111,6 +115,22 @@ c_misc_openauth_SOURCES = c/misc/openauth.c
- examplesdir = $(docdir)/examples
-
- adminexamplesdir = $(examplesdir)/c/admin
-+
-+if WITH_GNUTLS
-+dominfo_info1_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+domsuspend_suspend_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+hellolibvirt_hellolibvirt_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+openauth_openauth_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+endif
-+
- adminexamples_DATA = $(ADMIN_EXAMPLES)
-
- domainexamplesdir = $(examplesdir)/c/domain
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 53df930..2a0a989 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -166,6 +166,12 @@ virt_host_validate_LDADD = \
- $(GLIB_LIBS) \
- $(NULL)
-
-+if WITH_GNUTLS
-+virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- virt_host_validate_CFLAGS = \
- $(AM_CFLAGS) \
- $(NULL)
-@@ -262,6 +268,12 @@ virt_admin_CFLAGS = \
- $(READLINE_CFLAGS)
- BUILT_SOURCES =
-
-+if WITH_GNUTLS
-+virsh_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- if WITH_WIN_ICON
- virsh_LDADD += virsh_win_icon.$(OBJEXT)
-
diff --git a/recipes-extended/libvirt/libvirt_6.3.0.bb b/recipes-extended/libvirt/libvirt_7.2.0.bb
similarity index 69%
rename from recipes-extended/libvirt/libvirt_6.3.0.bb
rename to recipes-extended/libvirt/libvirt_7.2.0.bb
index 41abb06f..790071d5 100644
--- a/recipes-extended/libvirt/libvirt_6.3.0.bb
+++ b/recipes-extended/libvirt/libvirt_7.2.0.bb
@@ -18,96 +18,42 @@ RDEPENDS_${PN} = "gettext-runtime"

RDEPENDS_${PN}-ptest += "make gawk perl bash"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd ebtables"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

#connman blocks the 53 port and libvirtd can't start its DNS service
RCONFLICTS_${PN}_libvirtd = "connman"

+HOSTTOOLS_NONFATAL += "getent"
+
SRC_URI = "http://libvirt.org/sources/libvirt-${PV}.tar.xz;name=libvirt \
- file://tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch \
file://libvirtd.sh \
file://libvirtd.conf \
file://dnsmasq.conf \
- file://runptest.patch \
file://run-ptest \
- file://libvirt-use-pkg-config-to-locate-libcap.patch \
- file://0001-to-fix-build-error.patch \
- file://install-missing-file.patch \
file://0001-ptest-Remove-Windows-1252-check-from-esxutilstest.patch \
- file://configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch \
- file://0001-build-drop-unnecessary-libgnu.la-reference.patch \
file://hook_support.py \
file://gnutls-helper.py \
+ file://0001-meson-add-options-to-explicit-binaries-path.patch \
"

-SRC_URI[libvirt.md5sum] = "1bd4435f77924f5ec9928b538daf4a02"
-SRC_URI[libvirt.sha256sum] = "74069438d34082336e99a88146349e21130552b96efc3b7c562f6878127996f5"
+SRC_URI[libvirt.md5sum] = "92044b629216e44adce63224970a54a3"
+SRC_URI[libvirt.sha256sum] = "01f459d0c7ba5009622a628dba1a026200e8f4a299fea783b936a71d7e0ed1d0"

-inherit autotools gettext update-rc.d pkgconfig ptest systemd useradd perlnative
+inherit meson gettext update-rc.d pkgconfig ptest systemd useradd perlnative
USERADD_PACKAGES = "${PN}"
GROUPADD_PARAM_${PN} = "-r qemu; -r kvm"
USERADD_PARAM_${PN} = "-r -g qemu -G kvm qemu"

-# Override the default set in autotools.bbclass so that we will use relative pathnames
-# to our local m4 files. This prevents an "Argument list too long" error during configuration
-# if our project is in a directory with an absolute pathname of more than about 125 characters.
-#
-acpaths = "-I ./m4"
-
-CACHED_CONFIGUREVARS += "\
-ac_cv_path_XMLCATLOG=/usr/bin/xmlcatalog \
-ac_cv_path_AUGPARSE=/usr/bin/augparse \
-ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \
-ac_cv_path_DNSMASQ=/usr/bin/dnsmasq \
-ac_cv_path_BRCTL=/usr/sbin/brctl \
-ac_cv_path_TC=/sbin/tc \
-ac_cv_path_UDEVADM=/sbin/udevadm \
-ac_cv_path_MODPROBE=/sbin/modprobe \
-ac_cv_path_IP_PATH=/bin/ip \
-ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \
-ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \
-ac_cv_path_MOUNT=/bin/mount \
-ac_cv_path_UMOUNT=/bin/umount \
-ac_cv_path_MKFS=/usr/sbin/mkfs \
-ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \
-ac_cv_path_PVCREATE=/usr/sbin/pvcreate \
-ac_cv_path_VGCREATE=/usr/sbin/vgcreate \
-ac_cv_path_LVCREATE=/usr/sbin/lvcreate \
-ac_cv_path_PVREMOVE=/usr/sbin/pvremove \
-ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
-ac_cv_path_LVREMOVE=/usr/sbin/lvremove \
-ac_cv_path_LVCHANGE=/usr/sbin/lvchange \
-ac_cv_path_VGCHANGE=/usr/sbin/vgchange \
-ac_cv_path_VGSCAN=/usr/sbin/vgscan \
-ac_cv_path_PVS=/usr/sbin/pvs \
-ac_cv_path_VGS=/usr/sbin/vgs \
-ac_cv_path_LVS=/usr/sbin/lvs \
-ac_cv_path_PARTED=/usr/sbin/parted \
-ac_cv_path_DMSETUP=/usr/sbin/dmsetup"
-
-# Ensure that libvirt uses polkit rather than policykit, whether the host has
-# pkcheck installed or not, and ensure the path is correct per our config.
-CACHED_CONFIGUREVARS += "ac_cv_path_PKCHECK_PATH=${bindir}/pkcheck"
-
-# Some other possible paths we are not yet setting
-#ac_cv_path_RPCGEN=
-#ac_cv_path_XSLTPROC=
-#ac_cv_path_RADVD=
-#ac_cv_path_UDEVSETTLE=
-#ac_cv_path_EBTABLES_PATH=
-#ac_cv_path_PKG_CONFIG=
-#ac_cv_path_ac_pt_PKG_CONFIG
-#ac_cv_path_POLKIT_AUTH=
-#ac_cv_path_DTRACE=
-#ac_cv_path_ISCSIADM=
-#ac_cv_path_MSGFMT=
-#ac_cv_path_GMSGFMT=
-#ac_cv_path_XGETTEXT=
-#ac_cv_path_MSGMERGE=
-#ac_cv_path_SCRUB=
-#ac_cv_path_PYTHON=
+
+EXTRA_OEMESON += " \
+ -Dip6tables-path=/usr/sbin/ip6tables \
+ -Ddmidecode-path=/usr/sbin/dmidecode \
+ -Ddnsmasq-path=/usr/bin/dnsmasq \
+ -Diptables-path=/usr/sbin/iptables \
+ -Debtables-path=/sbin/ebtables \
+ "

ALLOW_EMPTY_${PN} = "1"

@@ -191,7 +137,7 @@ PRIVATE_LIBS_${PN}-ptest = " \
# full config
PACKAGECONFIG ??= "gnutls qemu yajl openvz vmware vbox esx iproute2 lxc test \
remote macvtap libvirtd netcf udev python ebtables \
- fuse iproute2 firewalld libpcap \
+ fuse firewalld libpcap \
${@bb.utils.contains('DISTRO_FEATURES', 'selinux', 'selinux audit libcap-ng', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'libxl', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'polkit', 'polkit', '', d)} \
@@ -208,37 +154,34 @@ PACKAGECONFIG_remove_armeb = "numactl"
# enable,disable,depends,rdepends
#
PACKAGECONFIG[gnutls] = ",,,gnutls-bin"
-PACKAGECONFIG[qemu] = "--with-qemu --with-qemu-user=qemu --with-qemu-group=qemu,--without-qemu,qemu,"
-PACKAGECONFIG[yajl] = "--with-yajl,--without-yajl,yajl,yajl"
-PACKAGECONFIG[libxl] = "--with-libxl=${STAGING_DIR_TARGET}/lib,--without-libxl,xen,"
-PACKAGECONFIG[openvz] = "--with-openvz,--without-openvz,,"
-PACKAGECONFIG[vmware] = "--with-vmware,--without-vmware,,"
-PACKAGECONFIG[vbox] = "--with-vbox,--without-vbox,,"
-PACKAGECONFIG[esx] = "--with-esx,--without-esx,,"
-PACKAGECONFIG[hyperv] = "--with-hyperv,--without-hyperv,,"
-PACKAGECONFIG[polkit] = "--with-polkit,--without-polkit,polkit,polkit"
-PACKAGECONFIG[lxc] = "--with-lxc,--without-lxc, lxc,"
-PACKAGECONFIG[test] = "--with-test=yes,--with-test=no,,"
-PACKAGECONFIG[remote] = "--with-remote,--without-remote,,"
-PACKAGECONFIG[macvtap] = "--with-macvtap=yes,--with-macvtap=no,libnl,libnl"
-PACKAGECONFIG[libvirtd] = "--with-libvirtd,--without-libvirtd,,"
-PACKAGECONFIG[netcf] = "--with-netcf,--without-netcf,netcf,netcf"
-PACKAGECONFIG[dtrace] = "--with-dtrace,--without-dtrace,,"
-PACKAGECONFIG[udev] = "--with-udev --with-pciaccess,--without-udev,udev libpciaccess,"
-PACKAGECONFIG[selinux] = "--with-selinux,--without-selinux,libselinux,"
-PACKAGECONFIG[ebtables] = "ac_cv_path_EBTABLES_PATH=/sbin/ebtables,ac_cv_path_EBTABLES_PATH=,ebtables,ebtables"
+PACKAGECONFIG[qemu] = "-Ddriver_qemu=enabled -Dqemu_user=qemu -Dqemu_group=qemu,-Dqemu=disabled,qemu,"
+PACKAGECONFIG[yajl] = "-Dyajl=enabled,-Dyajl=disabled,yajl,yajl"
+PACKAGECONFIG[libxl] = "-Dlibxl=${STAGING_DIR_TARGET}/lib,,xen,"
+PACKAGECONFIG[openvz] = "-Ddriver_openvz=enabled,-Ddriver_openvz=disabled,,"
+PACKAGECONFIG[vmware] = "-Ddriver_vmware=enabled,-Ddriver_vmware=disabled,,"
+PACKAGECONFIG[vbox] = "-Ddriver_vbox=enabled,-Ddriver_vbox=disabled,,"
+PACKAGECONFIG[esx] = "-Ddriver_esx=enabled,-Ddriver_esx=disabled,,"
+PACKAGECONFIG[hyperv] = "-Ddriver_hyperv=enabled,-Ddriver_hyperv=disabled,,"
+PACKAGECONFIG[polkit] = "-Dpolkit=enabled,-Dpolkit=disabled,polkit,polkit"
+PACKAGECONFIG[lxc] = "-Ddriver_lxc=enabled,-Ddriver_lxc=disabled,lxc,"
+PACKAGECONFIG[test] = "-Ddriver_test=enabled,-Ddriver_test=disabled,,"
+PACKAGECONFIG[remote] = "-Ddriver_remote=enabled,-Ddriver_remote=disabled,,"
+PACKAGECONFIG[libvirtd] = "-Ddriver_libvirtd=enabled,-Ddriver_libvirtd=disabled,,"
+PACKAGECONFIG[netcf] = "-Dnetcf=enabled,-Dnetcf=disabled,netcf,netcf"
+PACKAGECONFIG[dtrace] = "-Ddtrace=enabled,-Ddtrace=disabled,,"
+PACKAGECONFIG[udev] = "-Dudev=enabled -Dpciaccess=enabled,-Dudev=disabled,udev libpciaccess,"
+PACKAGECONFIG[selinux] = "-Dselinux=enabled,-Dselinux=disabled,libselinux,"
PACKAGECONFIG[python] = ",,python3,"
-PACKAGECONFIG[sasl] = "--with-sasl,--without-sasl,cyrus-sasl,cyrus-sasl"
-PACKAGECONFIG[iproute2] = "ac_cv_path_IP_PATH=/sbin/ip,ac_cv_path_IP_PATH=,iproute2,iproute2"
-PACKAGECONFIG[numactl] = "--with-numactl,--without-numactl,numactl,"
-PACKAGECONFIG[fuse] = "--with-fuse,--without-fuse,fuse,"
-PACKAGECONFIG[audit] = "--with-audit,--without-audit,audit,"
-PACKAGECONFIG[libcap-ng] = "--with-capng,--without-capng,libcap-ng,"
-PACKAGECONFIG[wireshark] = "--with-wireshark-dissector,--without-wireshark-dissector,wireshark libwsutil,"
-PACKAGECONFIG[apparmor-profiles] = "--with-apparmor-profiles, --without-apparmor-profiles,"
-PACKAGECONFIG[firewalld] = "--with-firewalld, --without-firewalld,"
-PACKAGECONFIG[libpcap] = "--with-libpcap, --without-libpcap,libpcap,libpcap"
-PACKAGECONFIG[numad] = "--with-numad, --without-numad,"
+PACKAGECONFIG[sasl] = "-Dsasl=enabled,-Dsasl=disabled,cyrus-sasl,cyrus-sasl"
+PACKAGECONFIG[numactl] = "-Dnumactl=enabled,-Dnumactl=disabled,numactl,"
+PACKAGECONFIG[fuse] = "-Dfuse=enabled,-Dfuse=disabled,fuse,"
+PACKAGECONFIG[audit] = "-Daudit=enabled,-Daudit=disabled,audit,"
+PACKAGECONFIG[libcap-ng] = "-Dcapng=enabled,-Dcapng=disabled,libcap-ng,"
+PACKAGECONFIG[wireshark] = "-Dwireshark_dissector=enabled,-Dwireshark_dissector=disabled,wireshark libwsutil,"
+PACKAGECONFIG[apparmor_profiles] = "-Dapparmor_profiles=true, -Dapparmor_profiles=false,"
+PACKAGECONFIG[firewalld] = "-Dfirewalld=enabled, -Dfirewalld=disabled,"
+PACKAGECONFIG[libpcap] = "-Dlibpcap=enabled, -Dlibpcap=disabled,libpcap,libpcap"
+PACKAGECONFIG[numad] = "-Dnumad=enabled, -Dnumad=disabled,"

# Enable the Python tool support
require libvirt-python.inc
@@ -255,7 +198,7 @@ do_compile() {

cd ${B}
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:${B}/src:"
- oe_runmake all
+ ninja all
}

do_install_prepend() {
@@ -278,6 +221,8 @@ do_install_append() {
fi

if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+ mkdir -p ${D}/lib
+ mv ${D}/usr/lib/systemd ${D}/lib
# This variable is used by libvirtd.service to start libvirtd in the right mode
sed -i '/#LIBVIRTD_ARGS="--listen"/a LIBVIRTD_ARGS="--listen --daemon"' ${D}/${sysconfdir}/sysconfig/libvirtd

@@ -360,7 +305,7 @@ do_install_append() {
# connection via 127.0.0.1 is available out of box.
install -d ${D}/etc/pki/CA
install -d ${D}/etc/pki/libvirt/private
- install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
+ install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
install -m 0644 ${WORKDIR}/cakey.pem ${D}/${sysconfdir}/pki/libvirt/private/cakey.pem
install -m 0644 ${WORKDIR}/cacert.pem ${D}/${sysconfdir}/pki/CA/cacert.pem
install -m 0644 ${WORKDIR}/serverkey.pem ${D}/${sysconfdir}/pki/libvirt/private/serverkey.pem
@@ -376,10 +321,10 @@ do_install_append() {
chmod 4755 ${D}${bindir}/virt-login-shell
}

-EXTRA_OECONF += " \
- --with-init-script=systemd \
- --with-test-suite \
- --with-runstatedir=/run \
+EXTRA_OEMESON += " \
+ -Dinit_script=systemd \
+ -Drunstatedir=/run \
+ -Dtests=enabled \
"

# gcc9 end up mis-compiling qemuxml2argvtest.o with Og which then
@@ -392,11 +337,11 @@ EXTRA_OEMAKE = "BUILD_DIR=${B} DEST_DIR=${D}${PTEST_PATH} PTEST_DIR=${PTEST_PATH
PRIVATE_LIBS_${PN}-ptest_append = "libvirt-admin.so.0"

do_compile_ptest() {
- oe_runmake -C tests buildtest-TESTS
+ ninja -C tests buildtest-TESTS
}

do_install_ptest() {
- oe_runmake -C tests install-ptest
+ ninja -C tests install-ptest

find ${S}/tests -maxdepth 1 -type d -exec cp -r {} ${D}${PTEST_PATH}/tests/ \;

--
2.27.0




--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


Re: [PATCH] libvirt: uprev v6.3 -> v7.2

Bruce Ashfield
 

On Wed, Apr 7, 2021 at 5:23 AM Xu, Yanfei <yanfei.xu@...> wrote:



On 4/7/21 8:35 AM, Bruce Ashfield wrote:
[Please note: This e-mail is from an EXTERNAL e-mail address]

In message: [meta-virtualization][PATCH] libvirt: uprev v6.3 -> v7.2
on 02/04/2021 Xu, Yanfei wrote:

From: Yanfei Xu <yanfei.xu@...>

This upgrade spans 9 small release. The detailed realese logs could
refer to: https://gitlab.com/libvirt/libvirt/-/blob/master/NEWS.rst

Libvirt's buildsystem has changed to meson, So this upgrade drop some
obsolete patches applied to makefile.

Due to libvirt's meson currently doesn't support to explicit the runtime
binaries path. I made a patch which is
0001-meson-add-options-to-explicit-binaries-path.patch for solving the
problem.
We've tranditionally had runtime issues each time libvirt was
uprev'd.
Yes. I saw there were some ancient patches...


Can you summarize the testing that you did after the upgrade ?
OK. I did the testing with our libvirt testcase and ovs testcase.
The summary is as follow:

libvirt_test (keyword: ) test results:
*1 Run libvirt_test testing(do_test1) PASS
*2 Check result (virsh_local_capabilities) PASS
*3 Check result (virsh_local_domcapabilities) PASS
*4 Check result (virsh_local_freecell) PASS
*5 Check result (virsh_local_help) PASS
*6 Check result (virsh_local_hostname) PASS
*7 Check result (virsh_local_iface-begin) PASS
*8 Check result (virsh_local_iface-commit) PASS
*9 Check result (virsh_local_iface-list) PASS
*10 Check result (virsh_local_list) PASS
*11 Check result (virsh_local_maxvcpus) PASS
*12 Check result (virsh_local_net-list) PASS
*13 Check result (virsh_local_nodecpumap) PASS
*14 Check result (virsh_local_nodecpustats) PASS
*15 Check result (virsh_local_nodedev-list) PASS
*16 Check result (virsh_local_nodeinfo) PASS
*17 Check result (virsh_local_node-memory-tune) PASS
*18 Check result (virsh_local_nodememstats) PASS
*19 Check result (virsh_local_nwfilter-binding-list) PASS
*20 Check result (virsh_local_nwfilter-list) PASS
*21 Check result (virsh_local_pool-capabilities) PASS
*22 Check result (virsh_local_pool-list) PASS
*23 Check result (virsh_local_pwd) PASS
*24 Check result (virsh_local_secret-list) PASS
*25 Check result (virsh_local_sysinfo) PASS
*26 Check result (virsh_local_uri) PASS
*27 Check result (virsh_local_version) PASS

openvswitch_vm2vm (keyword: qemux86) test results:
*1 openvswitch_vm2vm testing(do_test1) PASS
*2 Check result (ovs_vm2vm_boot_guest1) PASS
*3 Check result (ovs_vm2vm_boot_guest2) PASS
*4 Check result (ovs_vm2vm_netperf_test) PASS
*5 Check result (ovs_vm2vm_destroy_guest1) PASS
*6 Check result (ovs_vm2vm_destroy_guest2) PASS
*7 check testcase call trace(do_check_call_trace) PASS
Thanks, this helps.

The patch came through corrupted, and I fixed it up locally and then
added your test summary to the commit.

But it failed to build in my configuration:

| Library xentoollog found: YES
| Header <libxl.h> has symbol "LIBXL_DOMAIN_TYPE_PVH" : YES
| Checking if "lxc support" compiles: YES
|
| ../libvirt-7.2.0/meson.build:1725:61: ERROR: Program or command
'getent' not found or not executable
|

I'm building tip of tree for everything, qemux86-64

Bruce



Thanks,
Yanfei


Bruce


Signed-off-by: Yanfei Xu <yanfei.xu@...>
---
recipes-extended/libvirt/libvirt-python.inc | 4 +-
...drop-unnecessary-libgnu.la-reference.patch | 31 ----
...dd-options-to-explicit-binaries-path.patch | 86 ++++++++++
.../libvirt/0001-to-fix-build-error.patch | 47 -----
...-search-for-rpc-rpc.h-in-the-sysroot.patch | 34 ----
.../libvirt/install-missing-file.patch | 50 ------
...read-safety-in-lxc-callback-handling.patch | 63 -------
...virt-use-pkg-config-to-locate-libcap.patch | 43 -----
.../libvirt/qemu-fix-crash-in-qemuOpen.patch | 39 -----
.../libvirt/libvirt/runptest.patch | 116 -------------
...t-net-rpc-to-virt-host-validate-when.patch | 91 ----------
.../{libvirt_6.3.0.bb => libvirt_7.2.0.bb} | 161 ++++++------------
12 files changed, 141 insertions(+), 624 deletions(-)
delete mode 100644 recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
create mode 100644 recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
delete mode 100644 recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
delete mode 100644 recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
delete mode 100644 recipes-extended/libvirt/libvirt/install-missing-file.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
delete mode 100644 recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
delete mode 100644 recipes-extended/libvirt/libvirt/runptest.patch
delete mode 100644 recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
rename recipes-extended/libvirt/{libvirt_6.3.0.bb => libvirt_7.2.0.bb} (69%)

diff --git a/recipes-extended/libvirt/libvirt-python.inc b/recipes-extended/libvirt/libvirt-python.inc
index bcd76572..0c661af8 100644
--- a/recipes-extended/libvirt/libvirt-python.inc
+++ b/recipes-extended/libvirt/libvirt-python.inc
@@ -17,8 +17,8 @@ FILES_${PN}-python = "${bindir}/* ${libdir}/* ${libdir}/${PYTHON_DIR}/*"

SRC_URI += "http://libvirt.org/sources/python/libvirt-python-${PV}.tar.gz;name=libvirt_python"

-SRC_URI[libvirt_python.md5sum] = "4cf898350ee9a47f94986d402c153bdb"
-SRC_URI[libvirt_python.sha256sum] = "c772421ecc144f098f4ab15db700c62db9b9e6e76b876217edcfd62e9ce02750"
+SRC_URI[libvirt_python.md5sum] = "19bf22414a43d358581b9259b52047a7"
+SRC_URI[libvirt_python.sha256sum] = "c0c3bac54c55622e17927b09cd9843869600d71842fb072c99491fe2608dcee7"

export LIBVIRT_API_PATH = "${S}/docs/libvirt-api.xml"
export LIBVIRT_CFLAGS = "-I${S}/include"
diff --git a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch b/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
deleted file mode 100644
index f02a5d64..00000000
--- a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 30a056069cb35804434fb036e51ae97f33c02025 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Sat, 7 Mar 2020 21:36:27 -0500
-Subject: [PATCH] build: drop unnecessary libgnu.la reference
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-
----
- tools/Makefile.am | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 2a0a989..93fe283 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -168,7 +168,6 @@ virt_host_validate_LDADD = \
-
- if WITH_GNUTLS
- virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
-@@ -270,7 +269,6 @@ BUILT_SOURCES =
-
- if WITH_GNUTLS
- virsh_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
diff --git a/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
new file mode 100644
index 00000000..4c545d4a
--- /dev/null
+++ b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
@@ -0,0 +1,86 @@
+From 2e061ccf093063267277893cd5cacc9e7188c629 Mon Sep 17 00:00:00 2001
+From: Yanfei Xu <yanfei.xu@...>
+Date: Thu, 25 Mar 2021 16:24:04 +0800
+Subject: [PATCH] meson: add options to explicit binaries path
+
+In cross compile evironment, path of binaries is possiblely different
+between target and host. Let's add options to explicit binaries path
+to solve this problem.
+
+Upstream-Status: Pending
+
+Signed-off-by: Yanfei Xu <yanfei.xu@...>
+---
+ meson.build | 18 ++++++++++++------
+ meson_options.txt | 23 +++++++++++++++++++++++
+ 2 files changed, 35 insertions(+), 6 deletions(-)
+
+diff --git a/meson.build b/meson.build
+index 369548f127..6c93be8e4b 100644
+--- a/meson.build
++++ b/meson.build
+@@ -943,18 +943,24 @@ optional_programs = [
+ 'udevadm',
+ ]
+
++# if -Dxxx-path option is found, use that. Otherwise, check in $PATH,
++# /usr/sbin, /sbin, and fall back to the default from middle column.
+ foreach name : optional_programs
+- prog = find_program(name, required: false, dirs: libvirt_sbin_path)
+ varname = name.underscorify()
+- if prog.found()
+- prog_path = prog.path()
++ prog_path = get_option(name + '-path')
++ if prog_path != ''
++ message('Using @1@ for @0@'.format(name, prog_path))
+ else
+- prog_path = name
++ prog = find_program(name, required: false, dirs: libvirt_sbin_path)
++ if prog.found()
++ prog_path = prog.path()
++ else
++ prog_path = name
++ endif
++ set_variable('@0@_prog'.format(varname), prog)
+ endif
+-
+ conf.set_quoted(varname.to_upper(), prog_path)
+ conf.set_quoted('@0@_PATH'.format(varname.to_upper()), prog_path)
+- set_variable('@0@_prog'.format(varname), prog)
+ endforeach
+
+
+diff --git a/meson_options.txt b/meson_options.txt
+index e5d79c2b6b..f06f46c7bb 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -102,3 +102,26 @@ option('numad', type: 'feature', value: 'auto', description: 'use numad to manag
+ option('pm_utils', type: 'feature', value: 'auto', description: 'use pm-utils for power management')
+ option('sysctl_config', type: 'feature', value: 'auto', description: 'Whether to install sysctl configs')
+ option('tls_priority', type: 'string', value: 'NORMAL', description: 'set the default TLS session priority string')
++
++
++option('addr2line-path', type : 'string', description : 'path to addr2line')
++option('augparse-path', type : 'string', description : 'path to augparse')
++option('dmidecode-path', type : 'string', description : 'path to dmidecode')
++option('dnsmasq-path', type : 'string', description : 'path to dnsmasq')
++option('ebtables-path', type : 'string', description : 'path to ebtables')
++option('flake8-path', type : 'string', description : 'path to flake8')
++option('ip-path', type : 'string', description : 'path to ip')
++option('ip6tables-path', type : 'string', description : 'path to ip6tables')
++option('iptables-path', type : 'string', description : 'path to iptables')
++option('iscsiadm-path', type : 'string', description : 'path to iscsiadm')
++option('mdevctl-path', type : 'string', description : 'path to mdevctl')
++option('mm-ctl-path', type : 'string', description : 'path to mm-ctl')
++option('modprobe-path', type : 'string', description : 'path to modprobe')
++option('ovs-vsctl-path', type : 'string', description : 'path to ovs-vsctl')
++option('pdwtags-path', type : 'string', description : 'path to pdwtags')
++option('radvd-path', type : 'string', description : 'path to radvd')
++option('rmmod-path', type : 'string', description : 'path to rmmod')
++option('scrub-path', type : 'string', description : 'path to scrub')
++option('tc-path', type : 'string', description : 'path to tc')
++option('udevadm-path', type : 'string', description : 'path to udevadm')
++
+--
+2.27.0
+
diff --git a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch b/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
deleted file mode 100644
index b0148e5c..00000000
--- a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 3566bcacaa6408fb8f655d1749a20b2f30e0c765 Mon Sep 17 00:00:00 2001
-From: Lei Maohui <leimaohui@...>
-Date: Fri, 31 Jul 2015 03:17:07 +0900
-Subject: [PATCH] to fix build error
-
-The error likes as following
-
-| Generating internals/command.html.tmp
-| /bin/sh: line 3: internals/command.html.tmp: No such file or directory
-| rm: Generating internals/locking.html.tmp
-| cannot remove `internals/command.html.tmp': No such file or directory
-| make[3]: *** [internals/command.html.tmp] Error 1
-| make[3]: *** Waiting for unfinished jobs....
-
-Signed-off-by: Lei Maohui <leimaohui@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- docs/Makefile.am | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/docs/Makefile.am b/docs/Makefile.am
-index ce3d296..2c8180f 100644
---- a/docs/Makefile.am
-+++ b/docs/Makefile.am
-@@ -366,7 +366,7 @@ EXTRA_DIST= \
- aclperms.htmlinc \
- $(schema_DATA)
-
--acl_generated = aclperms.htmlinc
-+acl.html:: $(srcdir)/aclperms.htmlinc
-
- aclperms.htmlinc: $(top_srcdir)/src/access/viraccessperm.h \
- $(top_srcdir)/scripts/genaclperms.py Makefile.am
-@@ -432,8 +432,7 @@ manpages/%.html.in: manpages/%.rst
- $(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
- $(RST2HTML) --strict $< > $@ || { rm $@ && exit 1; }
-
--%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl \
-- $(acl_generated)
-+%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl
- $(AM_V_GEN)name=`echo $@ | sed -e 's/.tmp//'`; \
- genhtmlin=`echo $@ | sed -e 's/.tmp/.in/'`; \
- rst=`echo $@ | sed -e 's/.html.tmp/.rst/'`; \
diff --git a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch b/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
deleted file mode 100644
index 395d5610..00000000
--- a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 79f5975db01af0599860ccca7ef44b0e27105a04 Mon Sep 17 00:00:00 2001
-From: Mark Asselstine <mark.asselstine@...>
-Date: Thu, 10 May 2018 12:05:04 -0400
-Subject: [PATCH] configure.ac: search for rpc/rpc.h in the sysroot
-
-We want to avoid host contamination and use the sysroot as the base
-directory for our search so add the '=' the the '-I' when searching
-for libtirpc's rpc.h header.
-
-Upstream-Status: Inappropriate [old release]
-
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-xdr.m4 | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/m4/virt-xdr.m4 b/m4/virt-xdr.m4
-index 8375415..12b51f7 100644
---- a/m4/virt-xdr.m4
-+++ b/m4/virt-xdr.m4
-@@ -30,10 +30,10 @@ AC_DEFUN([LIBVIRT_CHECK_XDR], [
- ])
- with_xdr="yes"
-
-- dnl Recent glibc requires -I/usr/include/tirpc for <rpc/rpc.h>
-+ dnl Recent glibc requires -I=/usr/include/tirpc for <rpc/rpc.h>
- old_CFLAGS=$CFLAGS
- AC_CACHE_CHECK([where to find <rpc/rpc.h>], [lv_cv_xdr_cflags], [
-- for add_CFLAGS in '' '-I/usr/include/tirpc' 'missing'; do
-+ for add_CFLAGS in '' '-I=/usr/include/tirpc' 'missing'; do
- if test x"$add_CFLAGS" = xmissing; then
- lv_cv_xdr_cflags=missing; break
- fi
diff --git a/recipes-extended/libvirt/libvirt/install-missing-file.patch b/recipes-extended/libvirt/libvirt/install-missing-file.patch
deleted file mode 100644
index 6aa36df8..00000000
--- a/recipes-extended/libvirt/libvirt/install-missing-file.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From aa75f5136066d239d48a21373b3d96ee12378e8d Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 17:24:17 +0800
-Subject: [PATCH] Install missing conf file
-
-openvzutilstest.conf file is needed by openvzutilstest test.
-
-Upstream-Status: Inapproriate
-
-Signed-off-by: Catalin Enache <catalin.enache@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index 4a808dd..0c3e799 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -173,6 +173,7 @@ EXTRA_DIST = \
- $(NULL)
-
- test_helpers = commandhelper ssh
-+test_misc =
- test_programs = virshtest sockettest \
- virhostcputest virbuftest \
- commandtest seclabeltest \
-@@ -311,6 +312,7 @@ endif WITH_LXC
-
- if WITH_OPENVZ
- test_programs += openvzutilstest
-+test_misc += openvzutilstest.conf
- endif WITH_OPENVZ
-
- if WITH_ESX
-@@ -1551,7 +1553,7 @@ endif ! WITH_LINUX
-
- buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-
--PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+PTESTS = $(TESTS) $(test_helpers) $(test_misc) test-lib.sh virschematest
-
- install-ptest:
- list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
diff --git a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch b/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
deleted file mode 100644
index 558d5ef6..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From ad5d9cee87357f9f38f62583119606ef95ba10df Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@...>
-Date: Fri, 24 May 2013 16:46:00 +0300
-Subject: [PATCH] Fix thread safety in LXC callback handling
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@...>
----
- src/lxc/lxc_process.c | 18 +++++++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
-diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
-index aaa81a7..0eadc67 100644
---- a/src/lxc/lxc_process.c
-+++ b/src/lxc/lxc_process.c
-@@ -609,8 +609,13 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- virLXCProtocolExitStatus status,
- virDomainObjPtr vm)
- {
-+ virLXCDriverPtr driver = lxc_driver;
- virLXCDomainObjPrivatePtr priv = vm->privateData;
-
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
- switch (status) {
- case VIR_LXC_PROTOCOL_EXIT_STATUS_SHUTDOWN:
- priv->stopReason = VIR_DOMAIN_EVENT_STOPPED_SHUTDOWN;
-@@ -628,6 +633,8 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- }
- VIR_DEBUG("Domain shutoff reason %d (from status %d)",
- priv->stopReason, status);
-+
-+ virObjectUnlock(vm);
- }
-
- /* XXX a little evil */
-@@ -636,12 +643,21 @@ static void virLXCProcessMonitorInitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- pid_t initpid,
- virDomainObjPtr vm)
- {
-- virLXCDomainObjPrivatePtr priv = vm->privateData;
-+ virLXCDriverPtr driver = lxc_driver;
-+ virLXCDomainObjPrivatePtr priv;
-+
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
-+ priv = vm->privateData;
- priv->initpid = initpid;
- virDomainAuditInit(vm, initpid);
-
- if (virDomainSaveStatus(lxc_driver->caps, lxc_driver->stateDir, vm) < 0)
- VIR_WARN("Cannot update XML with PID for LXC %s", vm->def->name);
-+
-+ virObjectUnlock(vm);
- }
-
- static virLXCMonitorCallbacks monitorCallbacks = {
---
-1.7.11.7
-
diff --git a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch b/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
deleted file mode 100644
index 87b55915..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 94bd514e1b6e602a48285db94e65050f8f0c2585 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Wed, 8 Apr 2015 13:03:03 -0400
-Subject: [PATCH] libvirt: use pkg-config to locate libcap
-
-libvirt wants to use pcap-config to locate the exisence and location
-of libpcap. oe-core stubs this script and replaces it with pkg-config,
-which can lead to the host pcap-config triggering and either breaking
-the build or introducing host contamination.
-
-To fix this issue, we patch configure to use 'pkg-config libcap' to
-locate the correct libraries.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[MA: Update to apply agains v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-libpcap.m4 | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/m4/virt-libpcap.m4 b/m4/virt-libpcap.m4
-index 605c2fd..e0ab018 100644
---- a/m4/virt-libpcap.m4
-+++ b/m4/virt-libpcap.m4
-@@ -23,14 +23,14 @@ AC_DEFUN([LIBVIRT_ARG_LIBPCAP], [
-
- AC_DEFUN([LIBVIRT_CHECK_LIBPCAP], [
- LIBPCAP_REQUIRED="1.5.0"
-- LIBPCAP_CONFIG="pcap-config"
-+ LIBPCAP_CONFIG="pkg-config libpcap"
- LIBPCAP_CFLAGS=""
- LIBPCAP_LIBS=""
-
- if test "x$with_libpcap" != "xno"; then
- case $with_libpcap in
-- ''|yes|check) LIBPCAP_CONFIG="pcap-config" ;;
-- *) LIBPCAP_CONFIG="$with_libpcap/bin/pcap-config" ;;
-+ ''|yes|check) LIBPCAP_CONFIG="pkg-config libpcap" ;;
-+ *) LIBPCAP_CONFIG="$with_libpcap/bin/pkg-config libpcap" ;;
- esac
- AS_IF([test "x$LIBPCAP_CONFIG" != "x"], [
- AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
diff --git a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch b/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
deleted file mode 100644
index 3cf9e839..00000000
--- a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 74bff2509080912ea8abf1de8fd95fa2412b659a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=A1n=20Tomko?= <jtomko@...>
-Date: Thu, 11 Apr 2013 11:37:25 +0200
-Subject: [PATCH] qemu: fix crash in qemuOpen
-
-commit 74bff2509080912ea8abf1de8fd95fa2412b659a from upsteam
-git://libvirt.org/libvirt.git
-
-If the path part of connection URI is not present, cfg is used
-unitialized.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=950855
----
- src/qemu/qemu_driver.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
-index 2c0d7d1..0d41e39 100644
---- a/src/qemu/qemu_driver.c
-+++ b/src/qemu/qemu_driver.c
-@@ -1026,6 +1026,7 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-+ cfg = virQEMUDriverGetConfig(qemu_driver);
- if (conn->uri->path == NULL) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("no QEMU URI path given, try %s"),
-@@ -1033,7 +1034,6 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-- cfg = virQEMUDriverGetConfig(qemu_driver);
- if (cfg->privileged) {
- if (STRNEQ(conn->uri->path, "/system") &&
- STRNEQ(conn->uri->path, "/session")) {
---
-1.7.1
-
diff --git a/recipes-extended/libvirt/libvirt/runptest.patch b/recipes-extended/libvirt/libvirt/runptest.patch
deleted file mode 100644
index f6bc7736..00000000
--- a/recipes-extended/libvirt/libvirt/runptest.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d210838a4433dd254c1a11b08b804ebe9ff5f378 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 10:20:47 +0800
-Subject: [PATCH] Add 'install-ptest' rule
-
-Change TESTS_ENVIRONMENT to allow running outside build dir.
-
-Upstream-status: Pending
-Signed-off-by: Mihaela Sendrea <mihaela.sendrea@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Allow separate source and build dirs]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ZH: add missing test_helper files]
-Signed-off-by: He Zhe <zhe.he@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 68 +++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 60 insertions(+), 8 deletions(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index ada5b8f..4a808dd 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -28,11 +28,13 @@ AM_CPPFLAGS = \
-
- WARN_CFLAGS += $(RELAXED_FRAME_LIMIT_CFLAGS)
-
-+PTEST_DIR ?= $(libdir)/libvirt/ptest
-+
- AM_CFLAGS = \
-- -Dabs_builddir="\"$(abs_builddir)\"" \
-- -Dabs_top_builddir="\"$(abs_top_builddir)\"" \
-- -Dabs_srcdir="\"$(abs_srcdir)\"" \
-- -Dabs_top_srcdir="\"$(abs_top_srcdir)\"" \
-+ -Dabs_builddir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_builddir="\"$(PTEST_DIR)\"" \
-+ -Dabs_srcdir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_srcdir="\"$(PTEST_DIR)\"" \
- $(LIBXML_CFLAGS) \
- $(GLIB_CFLAGS) \
- $(LIBNL_CFLAGS) \
-@@ -474,10 +476,10 @@ TESTS = $(test_programs) \
-
- VIR_TEST_EXPENSIVE ?= $(VIR_TEST_EXPENSIVE_DEFAULT)
- TESTS_ENVIRONMENT = \
-- abs_top_builddir="$(abs_top_builddir)" \
-- abs_top_srcdir="$(abs_top_srcdir)" \
-- abs_builddir="$(abs_builddir)" \
-- abs_srcdir="$(abs_srcdir)" \
-+ abs_top_builddir="$(PTEST_DIR)" \
-+ abs_top_srcdir="$(PTEST_DIR)" \
-+ abs_builddir="$(PTEST_DIR)/tests" \
-+ abs_srcdir="$(PTEST_DIR)/tests" \
- LIBVIRT_AUTOSTART=0 \
- LC_ALL=C \
- VIR_TEST_EXPENSIVE=$(VIR_TEST_EXPENSIVE) \
-@@ -1547,4 +1549,54 @@ else ! WITH_LINUX
- EXTRA_DIST += virscsitest.c
- endif ! WITH_LINUX
-
-+buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-+
-+PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+
-+install-ptest:
-+ list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
-+ install -d $(DEST_DIR)/tools
-+ @(if [ -d ../tools/.libs ] ; then cd ../tools/.libs; fi; \
-+ install * $(DEST_DIR)/tools)
-+ install -d $(DEST_DIR)/src/network
-+ cp $(top_srcdir)/src/network/*.xml $(DEST_DIR)/src/network
-+ install -d $(DEST_DIR)/src/cpu_map
-+ cp $(top_srcdir)/src/cpu_map/*.xml $(DEST_DIR)/src/cpu_map
-+ install ../src/libvirt_iohelper $(DEST_DIR)/src
-+ install -D ../src/libvirtd $(DEST_DIR)/src/libvirtd
-+ install -d $(DEST_DIR)/src/remote
-+ install -D $(top_srcdir)/../build/src/remote/libvirtd.conf $(DEST_DIR)/src/remote/libvirtd.conf
-+ install -d $(DEST_DIR)/src/remote/.libs
-+ @(if [ -d ../src/remote/.libs ] ; then cd ../src/remote/.libs; fi; \
-+ install * $(DEST_DIR)/src/remote/.libs)
-+ install -d $(DEST_DIR)/src/.libs
-+ @(if [ -d ../src/.libs ] ; then cd ../src/.libs; fi; \
-+ install * $(DEST_DIR)/src/.libs)
-+ install -d $(DEST_DIR)/docs/schemas
-+ cp $(top_srcdir)/docs/schemas/*.rng $(DEST_DIR)/docs/schemas
-+ cp -r $(top_srcdir)/build-aux $(DEST_DIR)
-+ install -d $(DEST_DIR)/examples/xml
-+ cp -r $(top_srcdir)/examples/xml/test $(DEST_DIR)/examples/xml
-+ install -d $(DEST_DIR)/tests/.libs
-+ find . -type d -name "*xml2xml*" -exec cp -r {} $(DEST_DIR)/tests \;
-+ find . -type d -name "*data" -exec cp -r {} $(DEST_DIR)/tests \;
-+ @(for file in $(PTESTS); do \
-+ if [ -f .libs/$$file ]; then \
-+ install .libs/$$file $(DEST_DIR)/tests; \
-+ elif [ -f $(srcdir)/$$file ]; then \
-+ install $(srcdir)/$$file $(DEST_DIR)/tests; \
-+ else \
-+ install $(builddir)/$$file $(DEST_DIR)/tests; \
-+ fi; \
-+ done;)
-+ @(if [ -d .libs ]; then install .libs/*.so $(DEST_DIR)/tests/.libs; fi;)
-+ cp ../config.h $(DEST_DIR)
-+ cp Makefile $(DEST_DIR)/tests
-+ sed -i -e 's/^Makefile:/_Makefile:/' $(DEST_DIR)/tests/Makefile
-+ cp ../Makefile $(DEST_DIR)
-+ sed -i -e 's|^Makefile:|_Makefile:|' $(DEST_DIR)/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/tests/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/Makefile
-+ sed -i -e 's|^\(.*\.log:\) \(.*EXEEXT.*\)|\1|g' $(DEST_DIR)/tests/Makefile
-+
- CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
diff --git a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch b/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
deleted file mode 100644
index bb500fde..00000000
--- a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 7dc21edd851b260485b432c096f8e90f6fa07778 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Tue, 7 May 2019 15:26:32 +0800
-Subject: [PATCH] tools: add libvirt-net-rpc to virt-host-validate when TLS is
- enabled
-
-When gnu-tls is enabled for libvirt references to virNetTLSInit are
-generated in libvirt. Any binaries linking against libvirt, must also
-link against libvirt-net-rpc which provides the implementation.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ddu: rebase to v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- examples/Makefile.am | 20 ++++++++++++++++++++
- tools/Makefile.am | 12 ++++++++++++
- 2 files changed, 32 insertions(+)
-
-diff --git a/examples/Makefile.am b/examples/Makefile.am
-index ad635bd..a94f41d 100644
---- a/examples/Makefile.am
-+++ b/examples/Makefile.am
-@@ -74,6 +74,10 @@ LDADD = \
- $(top_builddir)/src/libvirt-admin.la \
- $(NULL)
-
-+if WITH_GNUTLS
-+LDADD += $(top_builddir)/src/libvirt-net-rpc.la
-+endif
-+
- noinst_PROGRAMS = \
- c/admin/client_close \
- c/admin/client_info \
-@@ -111,6 +115,22 @@ c_misc_openauth_SOURCES = c/misc/openauth.c
- examplesdir = $(docdir)/examples
-
- adminexamplesdir = $(examplesdir)/c/admin
-+
-+if WITH_GNUTLS
-+dominfo_info1_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+domsuspend_suspend_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+hellolibvirt_hellolibvirt_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+openauth_openauth_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+endif
-+
- adminexamples_DATA = $(ADMIN_EXAMPLES)
-
- domainexamplesdir = $(examplesdir)/c/domain
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 53df930..2a0a989 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -166,6 +166,12 @@ virt_host_validate_LDADD = \
- $(GLIB_LIBS) \
- $(NULL)
-
-+if WITH_GNUTLS
-+virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- virt_host_validate_CFLAGS = \
- $(AM_CFLAGS) \
- $(NULL)
-@@ -262,6 +268,12 @@ virt_admin_CFLAGS = \
- $(READLINE_CFLAGS)
- BUILT_SOURCES =
-
-+if WITH_GNUTLS
-+virsh_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- if WITH_WIN_ICON
- virsh_LDADD += virsh_win_icon.$(OBJEXT)
-
diff --git a/recipes-extended/libvirt/libvirt_6.3.0.bb b/recipes-extended/libvirt/libvirt_7.2.0.bb
similarity index 69%
rename from recipes-extended/libvirt/libvirt_6.3.0.bb
rename to recipes-extended/libvirt/libvirt_7.2.0.bb
index 41abb06f..790071d5 100644
--- a/recipes-extended/libvirt/libvirt_6.3.0.bb
+++ b/recipes-extended/libvirt/libvirt_7.2.0.bb
@@ -18,96 +18,42 @@ RDEPENDS_${PN} = "gettext-runtime"

RDEPENDS_${PN}-ptest += "make gawk perl bash"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd ebtables"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

#connman blocks the 53 port and libvirtd can't start its DNS service
RCONFLICTS_${PN}_libvirtd = "connman"

+HOSTTOOLS_NONFATAL += "getent"
+
SRC_URI = "http://libvirt.org/sources/libvirt-${PV}.tar.xz;name=libvirt \
- file://tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch \
file://libvirtd.sh \
file://libvirtd.conf \
file://dnsmasq.conf \
- file://runptest.patch \
file://run-ptest \
- file://libvirt-use-pkg-config-to-locate-libcap.patch \
- file://0001-to-fix-build-error.patch \
- file://install-missing-file.patch \
file://0001-ptest-Remove-Windows-1252-check-from-esxutilstest.patch \
- file://configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch \
- file://0001-build-drop-unnecessary-libgnu.la-reference.patch \
file://hook_support.py \
file://gnutls-helper.py \
+ file://0001-meson-add-options-to-explicit-binaries-path.patch \
"

-SRC_URI[libvirt.md5sum] = "1bd4435f77924f5ec9928b538daf4a02"
-SRC_URI[libvirt.sha256sum] = "74069438d34082336e99a88146349e21130552b96efc3b7c562f6878127996f5"
+SRC_URI[libvirt.md5sum] = "92044b629216e44adce63224970a54a3"
+SRC_URI[libvirt.sha256sum] = "01f459d0c7ba5009622a628dba1a026200e8f4a299fea783b936a71d7e0ed1d0"

-inherit autotools gettext update-rc.d pkgconfig ptest systemd useradd perlnative
+inherit meson gettext update-rc.d pkgconfig ptest systemd useradd perlnative
USERADD_PACKAGES = "${PN}"
GROUPADD_PARAM_${PN} = "-r qemu; -r kvm"
USERADD_PARAM_${PN} = "-r -g qemu -G kvm qemu"

-# Override the default set in autotools.bbclass so that we will use relative pathnames
-# to our local m4 files. This prevents an "Argument list too long" error during configuration
-# if our project is in a directory with an absolute pathname of more than about 125 characters.
-#
-acpaths = "-I ./m4"
-
-CACHED_CONFIGUREVARS += "\
-ac_cv_path_XMLCATLOG=/usr/bin/xmlcatalog \
-ac_cv_path_AUGPARSE=/usr/bin/augparse \
-ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \
-ac_cv_path_DNSMASQ=/usr/bin/dnsmasq \
-ac_cv_path_BRCTL=/usr/sbin/brctl \
-ac_cv_path_TC=/sbin/tc \
-ac_cv_path_UDEVADM=/sbin/udevadm \
-ac_cv_path_MODPROBE=/sbin/modprobe \
-ac_cv_path_IP_PATH=/bin/ip \
-ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \
-ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \
-ac_cv_path_MOUNT=/bin/mount \
-ac_cv_path_UMOUNT=/bin/umount \
-ac_cv_path_MKFS=/usr/sbin/mkfs \
-ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \
-ac_cv_path_PVCREATE=/usr/sbin/pvcreate \
-ac_cv_path_VGCREATE=/usr/sbin/vgcreate \
-ac_cv_path_LVCREATE=/usr/sbin/lvcreate \
-ac_cv_path_PVREMOVE=/usr/sbin/pvremove \
-ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
-ac_cv_path_LVREMOVE=/usr/sbin/lvremove \
-ac_cv_path_LVCHANGE=/usr/sbin/lvchange \
-ac_cv_path_VGCHANGE=/usr/sbin/vgchange \
-ac_cv_path_VGSCAN=/usr/sbin/vgscan \
-ac_cv_path_PVS=/usr/sbin/pvs \
-ac_cv_path_VGS=/usr/sbin/vgs \
-ac_cv_path_LVS=/usr/sbin/lvs \
-ac_cv_path_PARTED=/usr/sbin/parted \
-ac_cv_path_DMSETUP=/usr/sbin/dmsetup"
-
-# Ensure that libvirt uses polkit rather than policykit, whether the host has
-# pkcheck installed or not, and ensure the path is correct per our config.
-CACHED_CONFIGUREVARS += "ac_cv_path_PKCHECK_PATH=${bindir}/pkcheck"
-
-# Some other possible paths we are not yet setting
-#ac_cv_path_RPCGEN=
-#ac_cv_path_XSLTPROC=
-#ac_cv_path_RADVD=
-#ac_cv_path_UDEVSETTLE=
-#ac_cv_path_EBTABLES_PATH=
-#ac_cv_path_PKG_CONFIG=
-#ac_cv_path_ac_pt_PKG_CONFIG
-#ac_cv_path_POLKIT_AUTH=
-#ac_cv_path_DTRACE=
-#ac_cv_path_ISCSIADM=
-#ac_cv_path_MSGFMT=
-#ac_cv_path_GMSGFMT=
-#ac_cv_path_XGETTEXT=
-#ac_cv_path_MSGMERGE=
-#ac_cv_path_SCRUB=
-#ac_cv_path_PYTHON=
+
+EXTRA_OEMESON += " \
+ -Dip6tables-path=/usr/sbin/ip6tables \
+ -Ddmidecode-path=/usr/sbin/dmidecode \
+ -Ddnsmasq-path=/usr/bin/dnsmasq \
+ -Diptables-path=/usr/sbin/iptables \
+ -Debtables-path=/sbin/ebtables \
+ "

ALLOW_EMPTY_${PN} = "1"

@@ -191,7 +137,7 @@ PRIVATE_LIBS_${PN}-ptest = " \
# full config
PACKAGECONFIG ??= "gnutls qemu yajl openvz vmware vbox esx iproute2 lxc test \
remote macvtap libvirtd netcf udev python ebtables \
- fuse iproute2 firewalld libpcap \
+ fuse firewalld libpcap \
${@bb.utils.contains('DISTRO_FEATURES', 'selinux', 'selinux audit libcap-ng', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'libxl', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'polkit', 'polkit', '', d)} \
@@ -208,37 +154,34 @@ PACKAGECONFIG_remove_armeb = "numactl"
# enable,disable,depends,rdepends
#
PACKAGECONFIG[gnutls] = ",,,gnutls-bin"
-PACKAGECONFIG[qemu] = "--with-qemu --with-qemu-user=qemu --with-qemu-group=qemu,--without-qemu,qemu,"
-PACKAGECONFIG[yajl] = "--with-yajl,--without-yajl,yajl,yajl"
-PACKAGECONFIG[libxl] = "--with-libxl=${STAGING_DIR_TARGET}/lib,--without-libxl,xen,"
-PACKAGECONFIG[openvz] = "--with-openvz,--without-openvz,,"
-PACKAGECONFIG[vmware] = "--with-vmware,--without-vmware,,"
-PACKAGECONFIG[vbox] = "--with-vbox,--without-vbox,,"
-PACKAGECONFIG[esx] = "--with-esx,--without-esx,,"
-PACKAGECONFIG[hyperv] = "--with-hyperv,--without-hyperv,,"
-PACKAGECONFIG[polkit] = "--with-polkit,--without-polkit,polkit,polkit"
-PACKAGECONFIG[lxc] = "--with-lxc,--without-lxc, lxc,"
-PACKAGECONFIG[test] = "--with-test=yes,--with-test=no,,"
-PACKAGECONFIG[remote] = "--with-remote,--without-remote,,"
-PACKAGECONFIG[macvtap] = "--with-macvtap=yes,--with-macvtap=no,libnl,libnl"
-PACKAGECONFIG[libvirtd] = "--with-libvirtd,--without-libvirtd,,"
-PACKAGECONFIG[netcf] = "--with-netcf,--without-netcf,netcf,netcf"
-PACKAGECONFIG[dtrace] = "--with-dtrace,--without-dtrace,,"
-PACKAGECONFIG[udev] = "--with-udev --with-pciaccess,--without-udev,udev libpciaccess,"
-PACKAGECONFIG[selinux] = "--with-selinux,--without-selinux,libselinux,"
-PACKAGECONFIG[ebtables] = "ac_cv_path_EBTABLES_PATH=/sbin/ebtables,ac_cv_path_EBTABLES_PATH=,ebtables,ebtables"
+PACKAGECONFIG[qemu] = "-Ddriver_qemu=enabled -Dqemu_user=qemu -Dqemu_group=qemu,-Dqemu=disabled,qemu,"
+PACKAGECONFIG[yajl] = "-Dyajl=enabled,-Dyajl=disabled,yajl,yajl"
+PACKAGECONFIG[libxl] = "-Dlibxl=${STAGING_DIR_TARGET}/lib,,xen,"
+PACKAGECONFIG[openvz] = "-Ddriver_openvz=enabled,-Ddriver_openvz=disabled,,"
+PACKAGECONFIG[vmware] = "-Ddriver_vmware=enabled,-Ddriver_vmware=disabled,,"
+PACKAGECONFIG[vbox] = "-Ddriver_vbox=enabled,-Ddriver_vbox=disabled,,"
+PACKAGECONFIG[esx] = "-Ddriver_esx=enabled,-Ddriver_esx=disabled,,"
+PACKAGECONFIG[hyperv] = "-Ddriver_hyperv=enabled,-Ddriver_hyperv=disabled,,"
+PACKAGECONFIG[polkit] = "-Dpolkit=enabled,-Dpolkit=disabled,polkit,polkit"
+PACKAGECONFIG[lxc] = "-Ddriver_lxc=enabled,-Ddriver_lxc=disabled,lxc,"
+PACKAGECONFIG[test] = "-Ddriver_test=enabled,-Ddriver_test=disabled,,"
+PACKAGECONFIG[remote] = "-Ddriver_remote=enabled,-Ddriver_remote=disabled,,"
+PACKAGECONFIG[libvirtd] = "-Ddriver_libvirtd=enabled,-Ddriver_libvirtd=disabled,,"
+PACKAGECONFIG[netcf] = "-Dnetcf=enabled,-Dnetcf=disabled,netcf,netcf"
+PACKAGECONFIG[dtrace] = "-Ddtrace=enabled,-Ddtrace=disabled,,"
+PACKAGECONFIG[udev] = "-Dudev=enabled -Dpciaccess=enabled,-Dudev=disabled,udev libpciaccess,"
+PACKAGECONFIG[selinux] = "-Dselinux=enabled,-Dselinux=disabled,libselinux,"
PACKAGECONFIG[python] = ",,python3,"
-PACKAGECONFIG[sasl] = "--with-sasl,--without-sasl,cyrus-sasl,cyrus-sasl"
-PACKAGECONFIG[iproute2] = "ac_cv_path_IP_PATH=/sbin/ip,ac_cv_path_IP_PATH=,iproute2,iproute2"
-PACKAGECONFIG[numactl] = "--with-numactl,--without-numactl,numactl,"
-PACKAGECONFIG[fuse] = "--with-fuse,--without-fuse,fuse,"
-PACKAGECONFIG[audit] = "--with-audit,--without-audit,audit,"
-PACKAGECONFIG[libcap-ng] = "--with-capng,--without-capng,libcap-ng,"
-PACKAGECONFIG[wireshark] = "--with-wireshark-dissector,--without-wireshark-dissector,wireshark libwsutil,"
-PACKAGECONFIG[apparmor-profiles] = "--with-apparmor-profiles, --without-apparmor-profiles,"
-PACKAGECONFIG[firewalld] = "--with-firewalld, --without-firewalld,"
-PACKAGECONFIG[libpcap] = "--with-libpcap, --without-libpcap,libpcap,libpcap"
-PACKAGECONFIG[numad] = "--with-numad, --without-numad,"
+PACKAGECONFIG[sasl] = "-Dsasl=enabled,-Dsasl=disabled,cyrus-sasl,cyrus-sasl"
+PACKAGECONFIG[numactl] = "-Dnumactl=enabled,-Dnumactl=disabled,numactl,"
+PACKAGECONFIG[fuse] = "-Dfuse=enabled,-Dfuse=disabled,fuse,"
+PACKAGECONFIG[audit] = "-Daudit=enabled,-Daudit=disabled,audit,"
+PACKAGECONFIG[libcap-ng] = "-Dcapng=enabled,-Dcapng=disabled,libcap-ng,"
+PACKAGECONFIG[wireshark] = "-Dwireshark_dissector=enabled,-Dwireshark_dissector=disabled,wireshark libwsutil,"
+PACKAGECONFIG[apparmor_profiles] = "-Dapparmor_profiles=true, -Dapparmor_profiles=false,"
+PACKAGECONFIG[firewalld] = "-Dfirewalld=enabled, -Dfirewalld=disabled,"
+PACKAGECONFIG[libpcap] = "-Dlibpcap=enabled, -Dlibpcap=disabled,libpcap,libpcap"
+PACKAGECONFIG[numad] = "-Dnumad=enabled, -Dnumad=disabled,"

# Enable the Python tool support
require libvirt-python.inc
@@ -255,7 +198,7 @@ do_compile() {

cd ${B}
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:${B}/src:"
- oe_runmake all
+ ninja all
}

do_install_prepend() {
@@ -278,6 +221,8 @@ do_install_append() {
fi

if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+ mkdir -p ${D}/lib
+ mv ${D}/usr/lib/systemd ${D}/lib
# This variable is used by libvirtd.service to start libvirtd in the right mode
sed -i '/#LIBVIRTD_ARGS="--listen"/a LIBVIRTD_ARGS="--listen --daemon"' ${D}/${sysconfdir}/sysconfig/libvirtd

@@ -360,7 +305,7 @@ do_install_append() {
# connection via 127.0.0.1 is available out of box.
install -d ${D}/etc/pki/CA
install -d ${D}/etc/pki/libvirt/private
- install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
+ install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
install -m 0644 ${WORKDIR}/cakey.pem ${D}/${sysconfdir}/pki/libvirt/private/cakey.pem
install -m 0644 ${WORKDIR}/cacert.pem ${D}/${sysconfdir}/pki/CA/cacert.pem
install -m 0644 ${WORKDIR}/serverkey.pem ${D}/${sysconfdir}/pki/libvirt/private/serverkey.pem
@@ -376,10 +321,10 @@ do_install_append() {
chmod 4755 ${D}${bindir}/virt-login-shell
}

-EXTRA_OECONF += " \
- --with-init-script=systemd \
- --with-test-suite \
- --with-runstatedir=/run \
+EXTRA_OEMESON += " \
+ -Dinit_script=systemd \
+ -Drunstatedir=/run \
+ -Dtests=enabled \
"

# gcc9 end up mis-compiling qemuxml2argvtest.o with Og which then
@@ -392,11 +337,11 @@ EXTRA_OEMAKE = "BUILD_DIR=${B} DEST_DIR=${D}${PTEST_PATH} PTEST_DIR=${PTEST_PATH
PRIVATE_LIBS_${PN}-ptest_append = "libvirt-admin.so.0"

do_compile_ptest() {
- oe_runmake -C tests buildtest-TESTS
+ ninja -C tests buildtest-TESTS
}

do_install_ptest() {
- oe_runmake -C tests install-ptest
+ ninja -C tests install-ptest

find ${S}/tests -maxdepth 1 -type d -exec cp -r {} ${D}${PTEST_PATH}/tests/ \;

--
2.27.0




--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


[PATCH 5/5] python3-newrelic: Upgrade 6.0.1.155 -> 6.2.0.156

Leon Anavi
 

Upgrade to release 6.2.0.156:

- Improved CPU metric sampling
- Improved memory metric sampling
- Increased custom attribute limit from 64 to 128
- Fixed a TypeError with Uvicorn and unix sockets
- Fixed a crash when using a FIPS compliant system with Cross
Agent Tracing enabled

Signed-off-by: Leon Anavi <leon.anavi@...>
---
...on3-newrelic_6.0.1.155.bb => python3-newrelic_6.2.0.156.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-devtools/python/{python3-newrelic_6.0.1.155.bb => python3-newrelic_6.2.0.156.bb} (83%)

diff --git a/recipes-devtools/python/python3-newrelic_6.0.1.155.bb b/recipes-devtools/python/python3-newrelic_6.2.0.156.bb
similarity index 83%
rename from recipes-devtools/python/python3-newrelic_6.0.1.155.bb
rename to recipes-devtools/python/python3-newrelic_6.2.0.156.bb
index f79c99c..d3bbd9e 100644
--- a/recipes-devtools/python/python3-newrelic_6.0.1.155.bb
+++ b/recipes-devtools/python/python3-newrelic_6.2.0.156.bb
@@ -8,8 +8,7 @@ SECTION = "devel/python"
LICENSE = "BSD-3-Clause & MIT & Python-2.0 & BSD-2-Clause & NewRelic"
LIC_FILES_CHKSUM = "file://LICENSE;md5=2b42edef8fa55315f34f2370b4715ca9"

-SRC_URI[md5sum] = "0acf701c37ceb590e2a12d358ced16d7"
-SRC_URI[sha256sum] = "e96689fc75eb2b1591903ad9e74225f5e1da734afcd3151d318c53f6635b5dda"
+SRC_URI[sha256sum] = "3dec4647de67609570c4e305f2b6432a00e0a0940a7ac69660ee92268b49d6e7"

inherit pypi setuptools3

--
2.17.1


[PATCH 4/5] python3-boto3: Upgrade 1.14.7 -> 1.17.48

Leon Anavi
 

Upgrade to release 1.17.48:

- api-change:lookoutequipment: [botocore] This release introduces
support for Amazon Lookout for Equipment.
- api-change:kinesis-video-archived-media: [botocore]
Documentation updates for archived.kinesisvideo
- api-change:robomaker: [botocore] This release allows RoboMaker
customers to specify custom tools to run with their simulation
job
- api-change:appstream: [botocore] This release provides support
for image updates
- api-change:ram: [botocore] Documentation updates for AWS RAM
resource sharing
- api-change:customer-profiles: [botocore] Documentation updates
for Put-Integration API
- api-change:autoscaling: [botocore] Amazon EC2 Auto Scaling
announces Warm Pools that help applications to scale out faster
by pre-initializing EC2 instances and save money by requiring
fewer continuously running instances

Signed-off-by: Leon Anavi <leon.anavi@...>
---
.../{python3-boto3_1.14.7.bb => python3-boto3_1.17.48.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-devtools/python/{python3-boto3_1.14.7.bb => python3-boto3_1.17.48.bb} (75%)

diff --git a/recipes-devtools/python/python3-boto3_1.14.7.bb b/recipes-devtools/python/python3-boto3_1.17.48.bb
similarity index 75%
rename from recipes-devtools/python/python3-boto3_1.14.7.bb
rename to recipes-devtools/python/python3-boto3_1.17.48.bb
index f9e979e..fd2e479 100644
--- a/recipes-devtools/python/python3-boto3_1.14.7.bb
+++ b/recipes-devtools/python/python3-boto3_1.17.48.bb
@@ -9,7 +9,6 @@ SECTION = "devel/python"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://LICENSE;md5=2ee41112a44fe7014dce33e26468ba93"

-SRC_URI[md5sum] = "fb8b77d4ac10a971570419dd3613196e"
-SRC_URI[sha256sum] = "4856c8cb4150b900cc7dccbdf16f542fb8c12e97b17639979e58760847f7cf35"
+SRC_URI[sha256sum] = "e86c15049dc07cb67e8b466795f004f1f23c1acf078d47283cd5e4a692a5aa37"

inherit pypi setuptools3
--
2.17.1


[PATCH 2/5] python3-dotenv: Upgrade 0.13.0 -> 0.17.0

Leon Anavi
 

Upgrade to release 0.17.0:

- Make dotenv get <key> only show the value, not key=value
- Add --override/--no-override option to dotenv run

Signed-off-by: Leon Anavi <leon.anavi@...>
---
.../{python3-dotenv_0.13.0.bb => python3-dotenv_0.17.0.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-devtools/python/{python3-dotenv_0.13.0.bb => python3-dotenv_0.17.0.bb} (70%)

diff --git a/recipes-devtools/python/python3-dotenv_0.13.0.bb b/recipes-devtools/python/python3-dotenv_0.17.0.bb
similarity index 70%
rename from recipes-devtools/python/python3-dotenv_0.13.0.bb
rename to recipes-devtools/python/python3-dotenv_0.17.0.bb
index e7644cb..1fd13b7 100644
--- a/recipes-devtools/python/python3-dotenv_0.13.0.bb
+++ b/recipes-devtools/python/python3-dotenv_0.17.0.bb
@@ -7,7 +7,6 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=55ee2c3471d386636a719c8ccac40b31"

PYPI_PACKAGE = "python-dotenv"

-SRC_URI[md5sum] = "3dfde58c6a5fbd41292c4039a68f70f4"
-SRC_URI[sha256sum] = "3b9909bc96b0edc6b01586e1eed05e71174ef4e04c71da5786370cebea53ad74"
+SRC_URI[sha256sum] = "471b782da0af10da1a80341e8438fca5fadeba2881c54360d5fd8d03d03a4f4a"

inherit pypi setuptools3
--
2.17.1


[PATCH 3/5] python3-webob: Upgrade 1.8.5 -> 1.8.7

Leon Anavi
 

Upgrade to release 1.8.7:

- Decoding deflate-encoded responses now supports data which is
packed in a zlib container as it is supposed to be. The old,
non-standard behaviour is still supported.

Signed-off-by: Leon Anavi <leon.anavi@...>
---
.../python/{python3-webob_1.8.5.bb => python3-webob_1.8.7.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-devtools/python/{python3-webob_1.8.5.bb => python3-webob_1.8.7.bb} (67%)

diff --git a/recipes-devtools/python/python3-webob_1.8.5.bb b/recipes-devtools/python/python3-webob_1.8.7.bb
similarity index 67%
rename from recipes-devtools/python/python3-webob_1.8.5.bb
rename to recipes-devtools/python/python3-webob_1.8.7.bb
index 74a36e3..a51f8dd 100644
--- a/recipes-devtools/python/python3-webob_1.8.5.bb
+++ b/recipes-devtools/python/python3-webob_1.8.7.bb
@@ -6,8 +6,7 @@ LIC_FILES_CHKSUM = "file://docs/license.txt;md5=8ed3584bcc78c16da363747ccabc5af5

PYPI_PACKAGE = "WebOb"

-SRC_URI[md5sum] = "1761f416e8cf53f6fb674149cc223bd1"
-SRC_URI[sha256sum] = "05aaab7975e0ee8af2026325d656e5ce14a71f1883c52276181821d6d5bf7086"
+SRC_URI[sha256sum] = "b64ef5141be559cfade448f044fa45c2260351edcb6a8ef6b7e00c7dcef0c323"

inherit setuptools3 pypi

--
2.17.1


[PATCH 1/5] python3-paramiko: Upgrade 2.7.0 -> 2.7.2

Leon Anavi
 

Upgrade to release 2.7.2:

- Update our CI to catch issues with sdist generation,
installation and testing.
- Add missing test suite fixtures directory to MANIFEST.in,
reinstating the ability to run Paramiko's tests from an sdist
tarball.
- Remove leading whitespace from OpenSSH RSA test suite static
key fixture, to conform better to spec.
- Fix incorrect string formatting causing unhelpful error message
annotation when using Kerberos/GSSAPI.
- Fix incorrectly swapped order of p and q numbers when loading
OpenSSH-format RSA private keys. At minimum this should address
a slowdown when using such keys, and it also means Paramiko
works with Cryptography 3.1 and above (which complains
strenuously when this problem appears).

Signed-off-by: Leon Anavi <leon.anavi@...>
---
.../{python3-paramiko_2.7.0.bb => python3-paramiko_2.7.2.bb} | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
rename recipes-devtools/python/{python3-paramiko_2.7.0.bb => python3-paramiko_2.7.2.bb} (70%)

diff --git a/recipes-devtools/python/python3-paramiko_2.7.0.bb b/recipes-devtools/python/python3-paramiko_2.7.2.bb
similarity index 70%
rename from recipes-devtools/python/python3-paramiko_2.7.0.bb
rename to recipes-devtools/python/python3-paramiko_2.7.2.bb
index d03702c..3d05efb 100644
--- a/recipes-devtools/python/python3-paramiko_2.7.0.bb
+++ b/recipes-devtools/python/python3-paramiko_2.7.2.bb
@@ -5,8 +5,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=fd0120fc2e9f841c73ac707a30389af5"

inherit pypi setuptools3

-SRC_URI[md5sum] = "b130f3e1c3442d21c1a0c9ae17776f4e"
-SRC_URI[sha256sum] = "fba9c46340e3d690ad5a9d0dbf06677cd91425de3afa7e9c0c187298ee4ddd0d"
+SRC_URI[sha256sum] = "7f36f4ba2c0d81d219f4595e35f70d56cc94f9ac40a6acdf51d6ca210ce65035"

RDEPENDS_${PN} += " \
python3-bcrypt \
--
2.17.1


Re: openvswitch recipe: .bb SRC_URI simply overwrites SRC_URI from .inc file

Bruce Ashfield
 

On Fri, Apr 9, 2021 at 8:04 AM Robert P. J. Day <rpjday@...> wrote:


apart from the aforementioned oddity of appending to
FILESEXTRAPATHS, i just noticed that openvswitch.bb, as its first
line:

require openvswitch.inc

which, among other things, does this:

SRC_URI = "\
file://openvswitch-switch \
file://openvswitch-switch-setup \
file://openvswitch-testcontroller \
file://openvswitch-testcontroller-setup \
"

after which the recipe file itself simply stomps on that SRC_URI
setting thusly:

SRC_URI = "file://openvswitch-switch \
file://openvswitch-switch-setup \
file://openvswitch-testcontroller \
file://openvswitch-testcontroller-setup \
... etc etc ...



i will defer to the meta-virt folks to decide what they want to do
here (if anything).
We used to have multiple supported versions of openvswitch, and
those were common files, hence in the .include.

Over time, folks have forgotten that it was common and have clobbered
the values.

I'll fix it up this morning :D

Bruce


rday



--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


openvswitch recipe: .bb SRC_URI simply overwrites SRC_URI from .inc file

Robert P. J. Day
 

apart from the aforementioned oddity of appending to
FILESEXTRAPATHS, i just noticed that openvswitch.bb, as its first
line:

require openvswitch.inc

which, among other things, does this:

SRC_URI = "\
file://openvswitch-switch \
file://openvswitch-switch-setup \
file://openvswitch-testcontroller \
file://openvswitch-testcontroller-setup \
"

after which the recipe file itself simply stomps on that SRC_URI
setting thusly:

SRC_URI = "file://openvswitch-switch \
file://openvswitch-switch-setup \
file://openvswitch-testcontroller \
file://openvswitch-testcontroller-setup \
... etc etc ...



i will defer to the meta-virt folks to decide what they want to do
here (if anything).

rday


Re: "FILESEXTRAPATHS_append" error in openvswitch_git.bb

Robert P. J. Day
 

On Fri, 9 Apr 2021, Richard Purdie wrote:

On Fri, 2021-04-09 at 06:38 -0400, Robert P. J. Day wrote:
On Fri, 9 Apr 2021, Richard Purdie wrote:

On Fri, 2021-04-09 at 10:04 +0000, Peter Kjellerstedt wrote:
-----Original Message-----
From: meta-virtualization@... <meta-
virtualization@...> On Behalf Of Richard Purdie
Sent: den 6 april 2021 15:59
To: Bruce Ashfield <bruce.ashfield@...>; Robert P. J. Day
<rpjday@...>
Cc: meta-virtualization@...
Subject: Re: [meta-virtualization] "FILESEXTRAPATHS_append" error in
openvswitch_git.bb

On Tue, 2021-04-06 at 09:13 -0400, Bruce Ashfield wrote:
On Tue, Apr 6, 2021 at 9:07 AM Robert P. J. Day <rpjday@...>
wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 8:40 AM Robert P. J. Day
<rpjday@...> wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 5:35 AM Robert P. J. Day
<rpjday@...> wrote:


  this doesn't look right, but i don't know how one wants to
resolve
it:
What part doesn't look right ? I don't see any issues with it.

Bruce

  FILESEXTRAPATHS_append := "${THISDIR}/${PN}-git:"
  isn't the colon on the wrong end?
In a quick scan of other layers, they are all leaving the variable
in
the same state (with a trailing colon), whether they are using
_prepend or _append.
  i beg to differ -- here's a single example:

  meta-intel/recipes-core/zlib/zlib-intel_1.2.11.1.jtkv6.3.bb:
    FILESEXTRAPATHS_append = ":${COREBASE}/meta/recipes-core/zlib/zlib"
Do a build with that. You have a double colon, so you found a bad
example, unless the double colon is expected.

FILESEXTRAPATHS="__default::/home/poky/meta/recipes-core/zlib/zlib"
Anything using append should be adding a leading colon, anything
prepending should be adding a trailing one.

I suspect we need an audit and cleanup of several layers...

Cheers,

Richard
Normally, I would agree with you. However, the definition of FILESEXTRAPATHS in
meta/conf/bitbake.conf contradicts that:

FILESEXTRAPATHS ?= "__default:"

The benefit of that (I guess) is that the added string looks the same whether
_prepend or _append is used. At the same time it is a bit confusing since
this is not the normal pattern for adding to a colon-separated variable.
It gets worse unfortunately. See the code in classes/utils.bbclass which
handles this and the magic __default: value :/.

It is far from clear what is going on :(
  well, now that i've released the ferret into the henhouse, i see my
work here is done. :-)
Great, we've found some issues but the real challenge is figuring
out how to improve things and move forward from here. If you really
want to help, the work is just started.

If all these unresolved threads you're leaving are "someone else's
problem", that effectively means you're just creating work for
others and I know that personally, I have a ton already but thanks
for adding to the queue.
i'm more than happy to submit patches, after i've verified that i
actually understand the problem and someone else verifies that there
*is* a problem.

patches forthcoming.

rday


Re: "FILESEXTRAPATHS_append" error in openvswitch_git.bb

Richard Purdie
 

On Fri, 2021-04-09 at 06:38 -0400, Robert P. J. Day wrote:
On Fri, 9 Apr 2021, Richard Purdie wrote:

On Fri, 2021-04-09 at 10:04 +0000, Peter Kjellerstedt wrote:
-----Original Message-----
From: meta-virtualization@... <meta-
virtualization@...> On Behalf Of Richard Purdie
Sent: den 6 april 2021 15:59
To: Bruce Ashfield <bruce.ashfield@...>; Robert P. J. Day
<rpjday@...>
Cc: meta-virtualization@...
Subject: Re: [meta-virtualization] "FILESEXTRAPATHS_append" error in
openvswitch_git.bb

On Tue, 2021-04-06 at 09:13 -0400, Bruce Ashfield wrote:
On Tue, Apr 6, 2021 at 9:07 AM Robert P. J. Day <rpjday@...>
wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 8:40 AM Robert P. J. Day
<rpjday@...> wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 5:35 AM Robert P. J. Day
<rpjday@...> wrote:


  this doesn't look right, but i don't know how one wants to
resolve
it:
What part doesn't look right ? I don't see any issues with it.

Bruce

  FILESEXTRAPATHS_append := "${THISDIR}/${PN}-git:"
  isn't the colon on the wrong end?
In a quick scan of other layers, they are all leaving the variable
in
the same state (with a trailing colon), whether they are using
_prepend or _append.
  i beg to differ -- here's a single example:

  meta-intel/recipes-core/zlib/zlib-intel_1.2.11.1.jtkv6.3.bb:
    FILESEXTRAPATHS_append = ":${COREBASE}/meta/recipes-core/zlib/zlib"
Do a build with that. You have a double colon, so you found a bad
example, unless the double colon is expected.

FILESEXTRAPATHS="__default::/home/poky/meta/recipes-core/zlib/zlib"
Anything using append should be adding a leading colon, anything
prepending should be adding a trailing one.

I suspect we need an audit and cleanup of several layers...

Cheers,

Richard
Normally, I would agree with you. However, the definition of FILESEXTRAPATHS in
meta/conf/bitbake.conf contradicts that:

FILESEXTRAPATHS ?= "__default:"

The benefit of that (I guess) is that the added string looks the same whether
_prepend or _append is used. At the same time it is a bit confusing since
this is not the normal pattern for adding to a colon-separated variable.
It gets worse unfortunately. See the code in classes/utils.bbclass which
handles this and the magic __default: value :/.

It is far from clear what is going on :(
  well, now that i've released the ferret into the henhouse, i see my
work here is done. :-)
Great, we've found some issues but the real challenge is figuring out how 
to improve things and move forward from here. If you really want to help,
the work is just started.

If all these unresolved threads you're leaving are "someone else's problem",
that effectively means you're just creating work for others and I know that
personally, I have a ton already but thanks for adding to the queue.

Cheers,

Richard


Re: "FILESEXTRAPATHS_append" error in openvswitch_git.bb

Robert P. J. Day
 

On Fri, 9 Apr 2021, Richard Purdie wrote:

On Fri, 2021-04-09 at 10:04 +0000, Peter Kjellerstedt wrote:
-----Original Message-----
From: meta-virtualization@... <meta-
virtualization@...> On Behalf Of Richard Purdie
Sent: den 6 april 2021 15:59
To: Bruce Ashfield <bruce.ashfield@...>; Robert P. J. Day
<rpjday@...>
Cc: meta-virtualization@...
Subject: Re: [meta-virtualization] "FILESEXTRAPATHS_append" error in
openvswitch_git.bb

On Tue, 2021-04-06 at 09:13 -0400, Bruce Ashfield wrote:
On Tue, Apr 6, 2021 at 9:07 AM Robert P. J. Day <rpjday@...>
wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 8:40 AM Robert P. J. Day
<rpjday@...> wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 5:35 AM Robert P. J. Day
<rpjday@...> wrote:


  this doesn't look right, but i don't know how one wants to
resolve
it:
What part doesn't look right ? I don't see any issues with it.

Bruce

  FILESEXTRAPATHS_append := "${THISDIR}/${PN}-git:"
  isn't the colon on the wrong end?
In a quick scan of other layers, they are all leaving the variable
in
the same state (with a trailing colon), whether they are using
_prepend or _append.
  i beg to differ -- here's a single example:

  meta-intel/recipes-core/zlib/zlib-intel_1.2.11.1.jtkv6.3.bb:
    FILESEXTRAPATHS_append = ":${COREBASE}/meta/recipes-core/zlib/zlib"
Do a build with that. You have a double colon, so you found a bad
example, unless the double colon is expected.

FILESEXTRAPATHS="__default::/home/poky/meta/recipes-core/zlib/zlib"
Anything using append should be adding a leading colon, anything
prepending should be adding a trailing one.

I suspect we need an audit and cleanup of several layers...

Cheers,

Richard
Normally, I would agree with you. However, the definition of FILESEXTRAPATHS in
meta/conf/bitbake.conf contradicts that:

FILESEXTRAPATHS ?= "__default:"

The benefit of that (I guess) is that the added string looks the same whether
_prepend or _append is used. At the same time it is a bit confusing since
this is not the normal pattern for adding to a colon-separated variable.
It gets worse unfortunately. See the code in classes/utils.bbclass which
handles this and the magic __default: value :/.

It is far from clear what is going on :(
well, now that i've released the ferret into the henhouse, i see my
work here is done. :-)

rday


Re: "FILESEXTRAPATHS_append" error in openvswitch_git.bb

Richard Purdie
 

On Fri, 2021-04-09 at 10:04 +0000, Peter Kjellerstedt wrote:
-----Original Message-----
From: meta-virtualization@... <meta-
virtualization@...> On Behalf Of Richard Purdie
Sent: den 6 april 2021 15:59
To: Bruce Ashfield <bruce.ashfield@...>; Robert P. J. Day
<rpjday@...>
Cc: meta-virtualization@...
Subject: Re: [meta-virtualization] "FILESEXTRAPATHS_append" error in
openvswitch_git.bb

On Tue, 2021-04-06 at 09:13 -0400, Bruce Ashfield wrote:
On Tue, Apr 6, 2021 at 9:07 AM Robert P. J. Day <rpjday@...>
wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 8:40 AM Robert P. J. Day
<rpjday@...> wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 5:35 AM Robert P. J. Day
<rpjday@...> wrote:


  this doesn't look right, but i don't know how one wants to
resolve
it:
What part doesn't look right ? I don't see any issues with it.

Bruce

  FILESEXTRAPATHS_append := "${THISDIR}/${PN}-git:"
  isn't the colon on the wrong end?
In a quick scan of other layers, they are all leaving the variable
in
the same state (with a trailing colon), whether they are using
_prepend or _append.
  i beg to differ -- here's a single example:

  meta-intel/recipes-core/zlib/zlib-intel_1.2.11.1.jtkv6.3.bb:
    FILESEXTRAPATHS_append = ":${COREBASE}/meta/recipes-core/zlib/zlib"
Do a build with that. You have a double colon, so you found a bad
example, unless the double colon is expected.

FILESEXTRAPATHS="__default::/home/poky/meta/recipes-core/zlib/zlib"
Anything using append should be adding a leading colon, anything
prepending should be adding a trailing one.

I suspect we need an audit and cleanup of several layers...

Cheers,

Richard
Normally, I would agree with you. However, the definition of FILESEXTRAPATHS in
meta/conf/bitbake.conf contradicts that:

FILESEXTRAPATHS ?= "__default:"

The benefit of that (I guess) is that the added string looks the same whether
_prepend or _append is used. At the same time it is a bit confusing since
this is not the normal pattern for adding to a colon-separated variable.
It gets worse unfortunately. See the code in classes/utils.bbclass which
handles this and the magic __default: value :/.

It is far from clear what is going on :(

Cheers,

Richard


Re: "FILESEXTRAPATHS_append" error in openvswitch_git.bb

Peter Kjellerstedt
 

-----Original Message-----
From: meta-virtualization@... <meta-
virtualization@...> On Behalf Of Richard Purdie
Sent: den 6 april 2021 15:59
To: Bruce Ashfield <bruce.ashfield@...>; Robert P. J. Day
<rpjday@...>
Cc: meta-virtualization@...
Subject: Re: [meta-virtualization] "FILESEXTRAPATHS_append" error in
openvswitch_git.bb

On Tue, 2021-04-06 at 09:13 -0400, Bruce Ashfield wrote:
On Tue, Apr 6, 2021 at 9:07 AM Robert P. J. Day <rpjday@...>
wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 8:40 AM Robert P. J. Day
<rpjday@...> wrote:

On Tue, 6 Apr 2021, Bruce Ashfield wrote:

On Tue, Apr 6, 2021 at 5:35 AM Robert P. J. Day
<rpjday@...> wrote:


  this doesn't look right, but i don't know how one wants to
resolve
it:
What part doesn't look right ? I don't see any issues with it.

Bruce

  FILESEXTRAPATHS_append := "${THISDIR}/${PN}-git:"
  isn't the colon on the wrong end?
In a quick scan of other layers, they are all leaving the variable
in
the same state (with a trailing colon), whether they are using
_prepend or _append.
  i beg to differ -- here's a single example:

  meta-intel/recipes-core/zlib/zlib-intel_1.2.11.1.jtkv6.3.bb:
    FILESEXTRAPATHS_append = ":${COREBASE}/meta/recipes-core/zlib/zlib"
Do a build with that. You have a double colon, so you found a bad
example, unless the double colon is expected.

FILESEXTRAPATHS="__default::/home/poky/meta/recipes-core/zlib/zlib"
Anything using append should be adding a leading colon, anything
prepending should be adding a trailing one.

I suspect we need an audit and cleanup of several layers...

Cheers,

Richard
Normally, I would agree with you. However, the definition of FILESEXTRAPATHS in
meta/conf/bitbake.conf contradicts that:

FILESEXTRAPATHS ?= "__default:"

The benefit of that (I guess) is that the added string looks the same whether
_prepend or _append is used. At the same time it is a bit confusing since
this is not the normal pattern for adding to a colon-separated variable.

//Peter


Re: [PATCH] libvirt: uprev v6.3 -> v7.2

Xu, Yanfei
 

On 4/7/21 8:35 AM, Bruce Ashfield wrote:
[Please note: This e-mail is from an EXTERNAL e-mail address]
In message: [meta-virtualization][PATCH] libvirt: uprev v6.3 -> v7.2
on 02/04/2021 Xu, Yanfei wrote:

From: Yanfei Xu <yanfei.xu@...>

This upgrade spans 9 small release. The detailed realese logs could
refer to: https://gitlab.com/libvirt/libvirt/-/blob/master/NEWS.rst

Libvirt's buildsystem has changed to meson, So this upgrade drop some
obsolete patches applied to makefile.

Due to libvirt's meson currently doesn't support to explicit the runtime
binaries path. I made a patch which is
0001-meson-add-options-to-explicit-binaries-path.patch for solving the
problem.
We've tranditionally had runtime issues each time libvirt was
uprev'd.
Yes. I saw there were some ancient patches...

Can you summarize the testing that you did after the upgrade ?
OK. I did the testing with our libvirt testcase and ovs testcase.
The summary is as follow:

libvirt_test (keyword: ) test results:
*1 Run libvirt_test testing(do_test1) PASS
*2 Check result (virsh_local_capabilities) PASS
*3 Check result (virsh_local_domcapabilities) PASS
*4 Check result (virsh_local_freecell) PASS
*5 Check result (virsh_local_help) PASS
*6 Check result (virsh_local_hostname) PASS
*7 Check result (virsh_local_iface-begin) PASS
*8 Check result (virsh_local_iface-commit) PASS
*9 Check result (virsh_local_iface-list) PASS
*10 Check result (virsh_local_list) PASS
*11 Check result (virsh_local_maxvcpus) PASS
*12 Check result (virsh_local_net-list) PASS
*13 Check result (virsh_local_nodecpumap) PASS
*14 Check result (virsh_local_nodecpustats) PASS
*15 Check result (virsh_local_nodedev-list) PASS
*16 Check result (virsh_local_nodeinfo) PASS
*17 Check result (virsh_local_node-memory-tune) PASS
*18 Check result (virsh_local_nodememstats) PASS
*19 Check result (virsh_local_nwfilter-binding-list) PASS
*20 Check result (virsh_local_nwfilter-list) PASS
*21 Check result (virsh_local_pool-capabilities) PASS
*22 Check result (virsh_local_pool-list) PASS
*23 Check result (virsh_local_pwd) PASS
*24 Check result (virsh_local_secret-list) PASS
*25 Check result (virsh_local_sysinfo) PASS
*26 Check result (virsh_local_uri) PASS
*27 Check result (virsh_local_version) PASS

openvswitch_vm2vm (keyword: qemux86) test results:
*1 openvswitch_vm2vm testing(do_test1) PASS
*2 Check result (ovs_vm2vm_boot_guest1) PASS
*3 Check result (ovs_vm2vm_boot_guest2) PASS
*4 Check result (ovs_vm2vm_netperf_test) PASS
*5 Check result (ovs_vm2vm_destroy_guest1) PASS
*6 Check result (ovs_vm2vm_destroy_guest2) PASS
*7 check testcase call trace(do_check_call_trace) PASS

Thanks,
Yanfei

Bruce


Signed-off-by: Yanfei Xu <yanfei.xu@...>
---
recipes-extended/libvirt/libvirt-python.inc | 4 +-
...drop-unnecessary-libgnu.la-reference.patch | 31 ----
...dd-options-to-explicit-binaries-path.patch | 86 ++++++++++
.../libvirt/0001-to-fix-build-error.patch | 47 -----
...-search-for-rpc-rpc.h-in-the-sysroot.patch | 34 ----
.../libvirt/install-missing-file.patch | 50 ------
...read-safety-in-lxc-callback-handling.patch | 63 -------
...virt-use-pkg-config-to-locate-libcap.patch | 43 -----
.../libvirt/qemu-fix-crash-in-qemuOpen.patch | 39 -----
.../libvirt/libvirt/runptest.patch | 116 -------------
...t-net-rpc-to-virt-host-validate-when.patch | 91 ----------
.../{libvirt_6.3.0.bb => libvirt_7.2.0.bb} | 161 ++++++------------
12 files changed, 141 insertions(+), 624 deletions(-)
delete mode 100644 recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
create mode 100644 recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
delete mode 100644 recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
delete mode 100644 recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
delete mode 100644 recipes-extended/libvirt/libvirt/install-missing-file.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
delete mode 100644 recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
delete mode 100644 recipes-extended/libvirt/libvirt/runptest.patch
delete mode 100644 recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
rename recipes-extended/libvirt/{libvirt_6.3.0.bb => libvirt_7.2.0.bb} (69%)

diff --git a/recipes-extended/libvirt/libvirt-python.inc b/recipes-extended/libvirt/libvirt-python.inc
index bcd76572..0c661af8 100644
--- a/recipes-extended/libvirt/libvirt-python.inc
+++ b/recipes-extended/libvirt/libvirt-python.inc
@@ -17,8 +17,8 @@ FILES_${PN}-python = "${bindir}/* ${libdir}/* ${libdir}/${PYTHON_DIR}/*"

SRC_URI += "http://libvirt.org/sources/python/libvirt-python-${PV}.tar.gz;name=libvirt_python"

-SRC_URI[libvirt_python.md5sum] = "4cf898350ee9a47f94986d402c153bdb"
-SRC_URI[libvirt_python.sha256sum] = "c772421ecc144f098f4ab15db700c62db9b9e6e76b876217edcfd62e9ce02750"
+SRC_URI[libvirt_python.md5sum] = "19bf22414a43d358581b9259b52047a7"
+SRC_URI[libvirt_python.sha256sum] = "c0c3bac54c55622e17927b09cd9843869600d71842fb072c99491fe2608dcee7"

export LIBVIRT_API_PATH = "${S}/docs/libvirt-api.xml"
export LIBVIRT_CFLAGS = "-I${S}/include"
diff --git a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch b/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
deleted file mode 100644
index f02a5d64..00000000
--- a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 30a056069cb35804434fb036e51ae97f33c02025 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Sat, 7 Mar 2020 21:36:27 -0500
-Subject: [PATCH] build: drop unnecessary libgnu.la reference
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-
----
- tools/Makefile.am | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 2a0a989..93fe283 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -168,7 +168,6 @@ virt_host_validate_LDADD = \
-
- if WITH_GNUTLS
- virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
-@@ -270,7 +269,6 @@ BUILT_SOURCES =
-
- if WITH_GNUTLS
- virsh_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
diff --git a/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
new file mode 100644
index 00000000..4c545d4a
--- /dev/null
+++ b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
@@ -0,0 +1,86 @@
+From 2e061ccf093063267277893cd5cacc9e7188c629 Mon Sep 17 00:00:00 2001
+From: Yanfei Xu <yanfei.xu@...>
+Date: Thu, 25 Mar 2021 16:24:04 +0800
+Subject: [PATCH] meson: add options to explicit binaries path
+
+In cross compile evironment, path of binaries is possiblely different
+between target and host. Let's add options to explicit binaries path
+to solve this problem.
+
+Upstream-Status: Pending
+
+Signed-off-by: Yanfei Xu <yanfei.xu@...>
+---
+ meson.build | 18 ++++++++++++------
+ meson_options.txt | 23 +++++++++++++++++++++++
+ 2 files changed, 35 insertions(+), 6 deletions(-)
+
+diff --git a/meson.build b/meson.build
+index 369548f127..6c93be8e4b 100644
+--- a/meson.build
++++ b/meson.build
+@@ -943,18 +943,24 @@ optional_programs = [
+ 'udevadm',
+ ]
+
++# if -Dxxx-path option is found, use that. Otherwise, check in $PATH,
++# /usr/sbin, /sbin, and fall back to the default from middle column.
+ foreach name : optional_programs
+- prog = find_program(name, required: false, dirs: libvirt_sbin_path)
+ varname = name.underscorify()
+- if prog.found()
+- prog_path = prog.path()
++ prog_path = get_option(name + '-path')
++ if prog_path != ''
++ message('Using @1@ for @0@'.format(name, prog_path))
+ else
+- prog_path = name
++ prog = find_program(name, required: false, dirs: libvirt_sbin_path)
++ if prog.found()
++ prog_path = prog.path()
++ else
++ prog_path = name
++ endif
++ set_variable('@0@_prog'.format(varname), prog)
+ endif
+-
+ conf.set_quoted(varname.to_upper(), prog_path)
+ conf.set_quoted('@0@_PATH'.format(varname.to_upper()), prog_path)
+- set_variable('@0@_prog'.format(varname), prog)
+ endforeach
+
+
+diff --git a/meson_options.txt b/meson_options.txt
+index e5d79c2b6b..f06f46c7bb 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -102,3 +102,26 @@ option('numad', type: 'feature', value: 'auto', description: 'use numad to manag
+ option('pm_utils', type: 'feature', value: 'auto', description: 'use pm-utils for power management')
+ option('sysctl_config', type: 'feature', value: 'auto', description: 'Whether to install sysctl configs')
+ option('tls_priority', type: 'string', value: 'NORMAL', description: 'set the default TLS session priority string')
++
++
++option('addr2line-path', type : 'string', description : 'path to addr2line')
++option('augparse-path', type : 'string', description : 'path to augparse')
++option('dmidecode-path', type : 'string', description : 'path to dmidecode')
++option('dnsmasq-path', type : 'string', description : 'path to dnsmasq')
++option('ebtables-path', type : 'string', description : 'path to ebtables')
++option('flake8-path', type : 'string', description : 'path to flake8')
++option('ip-path', type : 'string', description : 'path to ip')
++option('ip6tables-path', type : 'string', description : 'path to ip6tables')
++option('iptables-path', type : 'string', description : 'path to iptables')
++option('iscsiadm-path', type : 'string', description : 'path to iscsiadm')
++option('mdevctl-path', type : 'string', description : 'path to mdevctl')
++option('mm-ctl-path', type : 'string', description : 'path to mm-ctl')
++option('modprobe-path', type : 'string', description : 'path to modprobe')
++option('ovs-vsctl-path', type : 'string', description : 'path to ovs-vsctl')
++option('pdwtags-path', type : 'string', description : 'path to pdwtags')
++option('radvd-path', type : 'string', description : 'path to radvd')
++option('rmmod-path', type : 'string', description : 'path to rmmod')
++option('scrub-path', type : 'string', description : 'path to scrub')
++option('tc-path', type : 'string', description : 'path to tc')
++option('udevadm-path', type : 'string', description : 'path to udevadm')
++
+--
+2.27.0
+
diff --git a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch b/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
deleted file mode 100644
index b0148e5c..00000000
--- a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 3566bcacaa6408fb8f655d1749a20b2f30e0c765 Mon Sep 17 00:00:00 2001
-From: Lei Maohui <leimaohui@...>
-Date: Fri, 31 Jul 2015 03:17:07 +0900
-Subject: [PATCH] to fix build error
-
-The error likes as following
-
-| Generating internals/command.html.tmp
-| /bin/sh: line 3: internals/command.html.tmp: No such file or directory
-| rm: Generating internals/locking.html.tmp
-| cannot remove `internals/command.html.tmp': No such file or directory
-| make[3]: *** [internals/command.html.tmp] Error 1
-| make[3]: *** Waiting for unfinished jobs....
-
-Signed-off-by: Lei Maohui <leimaohui@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- docs/Makefile.am | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/docs/Makefile.am b/docs/Makefile.am
-index ce3d296..2c8180f 100644
---- a/docs/Makefile.am
-+++ b/docs/Makefile.am
-@@ -366,7 +366,7 @@ EXTRA_DIST= \
- aclperms.htmlinc \
- $(schema_DATA)
-
--acl_generated = aclperms.htmlinc
-+acl.html:: $(srcdir)/aclperms.htmlinc
-
- aclperms.htmlinc: $(top_srcdir)/src/access/viraccessperm.h \
- $(top_srcdir)/scripts/genaclperms.py Makefile.am
-@@ -432,8 +432,7 @@ manpages/%.html.in: manpages/%.rst
- $(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
- $(RST2HTML) --strict $< > $@ || { rm $@ && exit 1; }
-
--%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl \
-- $(acl_generated)
-+%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl
- $(AM_V_GEN)name=`echo $@ | sed -e 's/.tmp//'`; \
- genhtmlin=`echo $@ | sed -e 's/.tmp/.in/'`; \
- rst=`echo $@ | sed -e 's/.html.tmp/.rst/'`; \
diff --git a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch b/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
deleted file mode 100644
index 395d5610..00000000
--- a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 79f5975db01af0599860ccca7ef44b0e27105a04 Mon Sep 17 00:00:00 2001
-From: Mark Asselstine <mark.asselstine@...>
-Date: Thu, 10 May 2018 12:05:04 -0400
-Subject: [PATCH] configure.ac: search for rpc/rpc.h in the sysroot
-
-We want to avoid host contamination and use the sysroot as the base
-directory for our search so add the '=' the the '-I' when searching
-for libtirpc's rpc.h header.
-
-Upstream-Status: Inappropriate [old release]
-
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-xdr.m4 | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/m4/virt-xdr.m4 b/m4/virt-xdr.m4
-index 8375415..12b51f7 100644
---- a/m4/virt-xdr.m4
-+++ b/m4/virt-xdr.m4
-@@ -30,10 +30,10 @@ AC_DEFUN([LIBVIRT_CHECK_XDR], [
- ])
- with_xdr="yes"
-
-- dnl Recent glibc requires -I/usr/include/tirpc for <rpc/rpc.h>
-+ dnl Recent glibc requires -I=/usr/include/tirpc for <rpc/rpc.h>
- old_CFLAGS=$CFLAGS
- AC_CACHE_CHECK([where to find <rpc/rpc.h>], [lv_cv_xdr_cflags], [
-- for add_CFLAGS in '' '-I/usr/include/tirpc' 'missing'; do
-+ for add_CFLAGS in '' '-I=/usr/include/tirpc' 'missing'; do
- if test x"$add_CFLAGS" = xmissing; then
- lv_cv_xdr_cflags=missing; break
- fi
diff --git a/recipes-extended/libvirt/libvirt/install-missing-file.patch b/recipes-extended/libvirt/libvirt/install-missing-file.patch
deleted file mode 100644
index 6aa36df8..00000000
--- a/recipes-extended/libvirt/libvirt/install-missing-file.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From aa75f5136066d239d48a21373b3d96ee12378e8d Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 17:24:17 +0800
-Subject: [PATCH] Install missing conf file
-
-openvzutilstest.conf file is needed by openvzutilstest test.
-
-Upstream-Status: Inapproriate
-
-Signed-off-by: Catalin Enache <catalin.enache@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index 4a808dd..0c3e799 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -173,6 +173,7 @@ EXTRA_DIST = \
- $(NULL)
-
- test_helpers = commandhelper ssh
-+test_misc =
- test_programs = virshtest sockettest \
- virhostcputest virbuftest \
- commandtest seclabeltest \
-@@ -311,6 +312,7 @@ endif WITH_LXC
-
- if WITH_OPENVZ
- test_programs += openvzutilstest
-+test_misc += openvzutilstest.conf
- endif WITH_OPENVZ
-
- if WITH_ESX
-@@ -1551,7 +1553,7 @@ endif ! WITH_LINUX
-
- buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-
--PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+PTESTS = $(TESTS) $(test_helpers) $(test_misc) test-lib.sh virschematest
-
- install-ptest:
- list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
diff --git a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch b/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
deleted file mode 100644
index 558d5ef6..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From ad5d9cee87357f9f38f62583119606ef95ba10df Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@...>
-Date: Fri, 24 May 2013 16:46:00 +0300
-Subject: [PATCH] Fix thread safety in LXC callback handling
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@...>
----
- src/lxc/lxc_process.c | 18 +++++++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
-diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
-index aaa81a7..0eadc67 100644
---- a/src/lxc/lxc_process.c
-+++ b/src/lxc/lxc_process.c
-@@ -609,8 +609,13 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- virLXCProtocolExitStatus status,
- virDomainObjPtr vm)
- {
-+ virLXCDriverPtr driver = lxc_driver;
- virLXCDomainObjPrivatePtr priv = vm->privateData;
-
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
- switch (status) {
- case VIR_LXC_PROTOCOL_EXIT_STATUS_SHUTDOWN:
- priv->stopReason = VIR_DOMAIN_EVENT_STOPPED_SHUTDOWN;
-@@ -628,6 +633,8 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- }
- VIR_DEBUG("Domain shutoff reason %d (from status %d)",
- priv->stopReason, status);
-+
-+ virObjectUnlock(vm);
- }
-
- /* XXX a little evil */
-@@ -636,12 +643,21 @@ static void virLXCProcessMonitorInitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- pid_t initpid,
- virDomainObjPtr vm)
- {
-- virLXCDomainObjPrivatePtr priv = vm->privateData;
-+ virLXCDriverPtr driver = lxc_driver;
-+ virLXCDomainObjPrivatePtr priv;
-+
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
-+ priv = vm->privateData;
- priv->initpid = initpid;
- virDomainAuditInit(vm, initpid);
-
- if (virDomainSaveStatus(lxc_driver->caps, lxc_driver->stateDir, vm) < 0)
- VIR_WARN("Cannot update XML with PID for LXC %s", vm->def->name);
-+
-+ virObjectUnlock(vm);
- }
-
- static virLXCMonitorCallbacks monitorCallbacks = {
---
-1.7.11.7
-
diff --git a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch b/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
deleted file mode 100644
index 87b55915..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 94bd514e1b6e602a48285db94e65050f8f0c2585 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Wed, 8 Apr 2015 13:03:03 -0400
-Subject: [PATCH] libvirt: use pkg-config to locate libcap
-
-libvirt wants to use pcap-config to locate the exisence and location
-of libpcap. oe-core stubs this script and replaces it with pkg-config,
-which can lead to the host pcap-config triggering and either breaking
-the build or introducing host contamination.
-
-To fix this issue, we patch configure to use 'pkg-config libcap' to
-locate the correct libraries.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[MA: Update to apply agains v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-libpcap.m4 | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/m4/virt-libpcap.m4 b/m4/virt-libpcap.m4
-index 605c2fd..e0ab018 100644
---- a/m4/virt-libpcap.m4
-+++ b/m4/virt-libpcap.m4
-@@ -23,14 +23,14 @@ AC_DEFUN([LIBVIRT_ARG_LIBPCAP], [
-
- AC_DEFUN([LIBVIRT_CHECK_LIBPCAP], [
- LIBPCAP_REQUIRED="1.5.0"
-- LIBPCAP_CONFIG="pcap-config"
-+ LIBPCAP_CONFIG="pkg-config libpcap"
- LIBPCAP_CFLAGS=""
- LIBPCAP_LIBS=""
-
- if test "x$with_libpcap" != "xno"; then
- case $with_libpcap in
-- ''|yes|check) LIBPCAP_CONFIG="pcap-config" ;;
-- *) LIBPCAP_CONFIG="$with_libpcap/bin/pcap-config" ;;
-+ ''|yes|check) LIBPCAP_CONFIG="pkg-config libpcap" ;;
-+ *) LIBPCAP_CONFIG="$with_libpcap/bin/pkg-config libpcap" ;;
- esac
- AS_IF([test "x$LIBPCAP_CONFIG" != "x"], [
- AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
diff --git a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch b/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
deleted file mode 100644
index 3cf9e839..00000000
--- a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 74bff2509080912ea8abf1de8fd95fa2412b659a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=A1n=20Tomko?= <jtomko@...>
-Date: Thu, 11 Apr 2013 11:37:25 +0200
-Subject: [PATCH] qemu: fix crash in qemuOpen
-
-commit 74bff2509080912ea8abf1de8fd95fa2412b659a from upsteam
-git://libvirt.org/libvirt.git
-
-If the path part of connection URI is not present, cfg is used
-unitialized.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=950855
----
- src/qemu/qemu_driver.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
-index 2c0d7d1..0d41e39 100644
---- a/src/qemu/qemu_driver.c
-+++ b/src/qemu/qemu_driver.c
-@@ -1026,6 +1026,7 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-+ cfg = virQEMUDriverGetConfig(qemu_driver);
- if (conn->uri->path == NULL) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("no QEMU URI path given, try %s"),
-@@ -1033,7 +1034,6 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-- cfg = virQEMUDriverGetConfig(qemu_driver);
- if (cfg->privileged) {
- if (STRNEQ(conn->uri->path, "/system") &&
- STRNEQ(conn->uri->path, "/session")) {
---
-1.7.1
-
diff --git a/recipes-extended/libvirt/libvirt/runptest.patch b/recipes-extended/libvirt/libvirt/runptest.patch
deleted file mode 100644
index f6bc7736..00000000
--- a/recipes-extended/libvirt/libvirt/runptest.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d210838a4433dd254c1a11b08b804ebe9ff5f378 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 10:20:47 +0800
-Subject: [PATCH] Add 'install-ptest' rule
-
-Change TESTS_ENVIRONMENT to allow running outside build dir.
-
-Upstream-status: Pending
-Signed-off-by: Mihaela Sendrea <mihaela.sendrea@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Allow separate source and build dirs]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ZH: add missing test_helper files]
-Signed-off-by: He Zhe <zhe.he@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 68 +++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 60 insertions(+), 8 deletions(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index ada5b8f..4a808dd 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -28,11 +28,13 @@ AM_CPPFLAGS = \
-
- WARN_CFLAGS += $(RELAXED_FRAME_LIMIT_CFLAGS)
-
-+PTEST_DIR ?= $(libdir)/libvirt/ptest
-+
- AM_CFLAGS = \
-- -Dabs_builddir="\"$(abs_builddir)\"" \
-- -Dabs_top_builddir="\"$(abs_top_builddir)\"" \
-- -Dabs_srcdir="\"$(abs_srcdir)\"" \
-- -Dabs_top_srcdir="\"$(abs_top_srcdir)\"" \
-+ -Dabs_builddir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_builddir="\"$(PTEST_DIR)\"" \
-+ -Dabs_srcdir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_srcdir="\"$(PTEST_DIR)\"" \
- $(LIBXML_CFLAGS) \
- $(GLIB_CFLAGS) \
- $(LIBNL_CFLAGS) \
-@@ -474,10 +476,10 @@ TESTS = $(test_programs) \
-
- VIR_TEST_EXPENSIVE ?= $(VIR_TEST_EXPENSIVE_DEFAULT)
- TESTS_ENVIRONMENT = \
-- abs_top_builddir="$(abs_top_builddir)" \
-- abs_top_srcdir="$(abs_top_srcdir)" \
-- abs_builddir="$(abs_builddir)" \
-- abs_srcdir="$(abs_srcdir)" \
-+ abs_top_builddir="$(PTEST_DIR)" \
-+ abs_top_srcdir="$(PTEST_DIR)" \
-+ abs_builddir="$(PTEST_DIR)/tests" \
-+ abs_srcdir="$(PTEST_DIR)/tests" \
- LIBVIRT_AUTOSTART=0 \
- LC_ALL=C \
- VIR_TEST_EXPENSIVE=$(VIR_TEST_EXPENSIVE) \
-@@ -1547,4 +1549,54 @@ else ! WITH_LINUX
- EXTRA_DIST += virscsitest.c
- endif ! WITH_LINUX
-
-+buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-+
-+PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+
-+install-ptest:
-+ list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
-+ install -d $(DEST_DIR)/tools
-+ @(if [ -d ../tools/.libs ] ; then cd ../tools/.libs; fi; \
-+ install * $(DEST_DIR)/tools)
-+ install -d $(DEST_DIR)/src/network
-+ cp $(top_srcdir)/src/network/*.xml $(DEST_DIR)/src/network
-+ install -d $(DEST_DIR)/src/cpu_map
-+ cp $(top_srcdir)/src/cpu_map/*.xml $(DEST_DIR)/src/cpu_map
-+ install ../src/libvirt_iohelper $(DEST_DIR)/src
-+ install -D ../src/libvirtd $(DEST_DIR)/src/libvirtd
-+ install -d $(DEST_DIR)/src/remote
-+ install -D $(top_srcdir)/../build/src/remote/libvirtd.conf $(DEST_DIR)/src/remote/libvirtd.conf
-+ install -d $(DEST_DIR)/src/remote/.libs
-+ @(if [ -d ../src/remote/.libs ] ; then cd ../src/remote/.libs; fi; \
-+ install * $(DEST_DIR)/src/remote/.libs)
-+ install -d $(DEST_DIR)/src/.libs
-+ @(if [ -d ../src/.libs ] ; then cd ../src/.libs; fi; \
-+ install * $(DEST_DIR)/src/.libs)
-+ install -d $(DEST_DIR)/docs/schemas
-+ cp $(top_srcdir)/docs/schemas/*.rng $(DEST_DIR)/docs/schemas
-+ cp -r $(top_srcdir)/build-aux $(DEST_DIR)
-+ install -d $(DEST_DIR)/examples/xml
-+ cp -r $(top_srcdir)/examples/xml/test $(DEST_DIR)/examples/xml
-+ install -d $(DEST_DIR)/tests/.libs
-+ find . -type d -name "*xml2xml*" -exec cp -r {} $(DEST_DIR)/tests \;
-+ find . -type d -name "*data" -exec cp -r {} $(DEST_DIR)/tests \;
-+ @(for file in $(PTESTS); do \
-+ if [ -f .libs/$$file ]; then \
-+ install .libs/$$file $(DEST_DIR)/tests; \
-+ elif [ -f $(srcdir)/$$file ]; then \
-+ install $(srcdir)/$$file $(DEST_DIR)/tests; \
-+ else \
-+ install $(builddir)/$$file $(DEST_DIR)/tests; \
-+ fi; \
-+ done;)
-+ @(if [ -d .libs ]; then install .libs/*.so $(DEST_DIR)/tests/.libs; fi;)
-+ cp ../config.h $(DEST_DIR)
-+ cp Makefile $(DEST_DIR)/tests
-+ sed -i -e 's/^Makefile:/_Makefile:/' $(DEST_DIR)/tests/Makefile
-+ cp ../Makefile $(DEST_DIR)
-+ sed -i -e 's|^Makefile:|_Makefile:|' $(DEST_DIR)/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/tests/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/Makefile
-+ sed -i -e 's|^\(.*\.log:\) \(.*EXEEXT.*\)|\1|g' $(DEST_DIR)/tests/Makefile
-+
- CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
diff --git a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch b/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
deleted file mode 100644
index bb500fde..00000000
--- a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 7dc21edd851b260485b432c096f8e90f6fa07778 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Tue, 7 May 2019 15:26:32 +0800
-Subject: [PATCH] tools: add libvirt-net-rpc to virt-host-validate when TLS is
- enabled
-
-When gnu-tls is enabled for libvirt references to virNetTLSInit are
-generated in libvirt. Any binaries linking against libvirt, must also
-link against libvirt-net-rpc which provides the implementation.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ddu: rebase to v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- examples/Makefile.am | 20 ++++++++++++++++++++
- tools/Makefile.am | 12 ++++++++++++
- 2 files changed, 32 insertions(+)
-
-diff --git a/examples/Makefile.am b/examples/Makefile.am
-index ad635bd..a94f41d 100644
---- a/examples/Makefile.am
-+++ b/examples/Makefile.am
-@@ -74,6 +74,10 @@ LDADD = \
- $(top_builddir)/src/libvirt-admin.la \
- $(NULL)
-
-+if WITH_GNUTLS
-+LDADD += $(top_builddir)/src/libvirt-net-rpc.la
-+endif
-+
- noinst_PROGRAMS = \
- c/admin/client_close \
- c/admin/client_info \
-@@ -111,6 +115,22 @@ c_misc_openauth_SOURCES = c/misc/openauth.c
- examplesdir = $(docdir)/examples
-
- adminexamplesdir = $(examplesdir)/c/admin
-+
-+if WITH_GNUTLS
-+dominfo_info1_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+domsuspend_suspend_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+hellolibvirt_hellolibvirt_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+openauth_openauth_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+endif
-+
- adminexamples_DATA = $(ADMIN_EXAMPLES)
-
- domainexamplesdir = $(examplesdir)/c/domain
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 53df930..2a0a989 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -166,6 +166,12 @@ virt_host_validate_LDADD = \
- $(GLIB_LIBS) \
- $(NULL)
-
-+if WITH_GNUTLS
-+virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- virt_host_validate_CFLAGS = \
- $(AM_CFLAGS) \
- $(NULL)
-@@ -262,6 +268,12 @@ virt_admin_CFLAGS = \
- $(READLINE_CFLAGS)
- BUILT_SOURCES =
-
-+if WITH_GNUTLS
-+virsh_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- if WITH_WIN_ICON
- virsh_LDADD += virsh_win_icon.$(OBJEXT)
-
diff --git a/recipes-extended/libvirt/libvirt_6.3.0.bb b/recipes-extended/libvirt/libvirt_7.2.0.bb
similarity index 69%
rename from recipes-extended/libvirt/libvirt_6.3.0.bb
rename to recipes-extended/libvirt/libvirt_7.2.0.bb
index 41abb06f..790071d5 100644
--- a/recipes-extended/libvirt/libvirt_6.3.0.bb
+++ b/recipes-extended/libvirt/libvirt_7.2.0.bb
@@ -18,96 +18,42 @@ RDEPENDS_${PN} = "gettext-runtime"

RDEPENDS_${PN}-ptest += "make gawk perl bash"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd ebtables"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

#connman blocks the 53 port and libvirtd can't start its DNS service
RCONFLICTS_${PN}_libvirtd = "connman"

+HOSTTOOLS_NONFATAL += "getent"
+
SRC_URI = "http://libvirt.org/sources/libvirt-${PV}.tar.xz;name=libvirt \
- file://tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch \
file://libvirtd.sh \
file://libvirtd.conf \
file://dnsmasq.conf \
- file://runptest.patch \
file://run-ptest \
- file://libvirt-use-pkg-config-to-locate-libcap.patch \
- file://0001-to-fix-build-error.patch \
- file://install-missing-file.patch \
file://0001-ptest-Remove-Windows-1252-check-from-esxutilstest.patch \
- file://configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch \
- file://0001-build-drop-unnecessary-libgnu.la-reference.patch \
file://hook_support.py \
file://gnutls-helper.py \
+ file://0001-meson-add-options-to-explicit-binaries-path.patch \
"

-SRC_URI[libvirt.md5sum] = "1bd4435f77924f5ec9928b538daf4a02"
-SRC_URI[libvirt.sha256sum] = "74069438d34082336e99a88146349e21130552b96efc3b7c562f6878127996f5"
+SRC_URI[libvirt.md5sum] = "92044b629216e44adce63224970a54a3"
+SRC_URI[libvirt.sha256sum] = "01f459d0c7ba5009622a628dba1a026200e8f4a299fea783b936a71d7e0ed1d0"

-inherit autotools gettext update-rc.d pkgconfig ptest systemd useradd perlnative
+inherit meson gettext update-rc.d pkgconfig ptest systemd useradd perlnative
USERADD_PACKAGES = "${PN}"
GROUPADD_PARAM_${PN} = "-r qemu; -r kvm"
USERADD_PARAM_${PN} = "-r -g qemu -G kvm qemu"

-# Override the default set in autotools.bbclass so that we will use relative pathnames
-# to our local m4 files. This prevents an "Argument list too long" error during configuration
-# if our project is in a directory with an absolute pathname of more than about 125 characters.
-#
-acpaths = "-I ./m4"
-
-CACHED_CONFIGUREVARS += "\
-ac_cv_path_XMLCATLOG=/usr/bin/xmlcatalog \
-ac_cv_path_AUGPARSE=/usr/bin/augparse \
-ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \
-ac_cv_path_DNSMASQ=/usr/bin/dnsmasq \
-ac_cv_path_BRCTL=/usr/sbin/brctl \
-ac_cv_path_TC=/sbin/tc \
-ac_cv_path_UDEVADM=/sbin/udevadm \
-ac_cv_path_MODPROBE=/sbin/modprobe \
-ac_cv_path_IP_PATH=/bin/ip \
-ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \
-ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \
-ac_cv_path_MOUNT=/bin/mount \
-ac_cv_path_UMOUNT=/bin/umount \
-ac_cv_path_MKFS=/usr/sbin/mkfs \
-ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \
-ac_cv_path_PVCREATE=/usr/sbin/pvcreate \
-ac_cv_path_VGCREATE=/usr/sbin/vgcreate \
-ac_cv_path_LVCREATE=/usr/sbin/lvcreate \
-ac_cv_path_PVREMOVE=/usr/sbin/pvremove \
-ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
-ac_cv_path_LVREMOVE=/usr/sbin/lvremove \
-ac_cv_path_LVCHANGE=/usr/sbin/lvchange \
-ac_cv_path_VGCHANGE=/usr/sbin/vgchange \
-ac_cv_path_VGSCAN=/usr/sbin/vgscan \
-ac_cv_path_PVS=/usr/sbin/pvs \
-ac_cv_path_VGS=/usr/sbin/vgs \
-ac_cv_path_LVS=/usr/sbin/lvs \
-ac_cv_path_PARTED=/usr/sbin/parted \
-ac_cv_path_DMSETUP=/usr/sbin/dmsetup"
-
-# Ensure that libvirt uses polkit rather than policykit, whether the host has
-# pkcheck installed or not, and ensure the path is correct per our config.
-CACHED_CONFIGUREVARS += "ac_cv_path_PKCHECK_PATH=${bindir}/pkcheck"
-
-# Some other possible paths we are not yet setting
-#ac_cv_path_RPCGEN=
-#ac_cv_path_XSLTPROC=
-#ac_cv_path_RADVD=
-#ac_cv_path_UDEVSETTLE=
-#ac_cv_path_EBTABLES_PATH=
-#ac_cv_path_PKG_CONFIG=
-#ac_cv_path_ac_pt_PKG_CONFIG
-#ac_cv_path_POLKIT_AUTH=
-#ac_cv_path_DTRACE=
-#ac_cv_path_ISCSIADM=
-#ac_cv_path_MSGFMT=
-#ac_cv_path_GMSGFMT=
-#ac_cv_path_XGETTEXT=
-#ac_cv_path_MSGMERGE=
-#ac_cv_path_SCRUB=
-#ac_cv_path_PYTHON=
+
+EXTRA_OEMESON += " \
+ -Dip6tables-path=/usr/sbin/ip6tables \
+ -Ddmidecode-path=/usr/sbin/dmidecode \
+ -Ddnsmasq-path=/usr/bin/dnsmasq \
+ -Diptables-path=/usr/sbin/iptables \
+ -Debtables-path=/sbin/ebtables \
+ "

ALLOW_EMPTY_${PN} = "1"

@@ -191,7 +137,7 @@ PRIVATE_LIBS_${PN}-ptest = " \
# full config
PACKAGECONFIG ??= "gnutls qemu yajl openvz vmware vbox esx iproute2 lxc test \
remote macvtap libvirtd netcf udev python ebtables \
- fuse iproute2 firewalld libpcap \
+ fuse firewalld libpcap \
${@bb.utils.contains('DISTRO_FEATURES', 'selinux', 'selinux audit libcap-ng', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'libxl', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'polkit', 'polkit', '', d)} \
@@ -208,37 +154,34 @@ PACKAGECONFIG_remove_armeb = "numactl"
# enable,disable,depends,rdepends
#
PACKAGECONFIG[gnutls] = ",,,gnutls-bin"
-PACKAGECONFIG[qemu] = "--with-qemu --with-qemu-user=qemu --with-qemu-group=qemu,--without-qemu,qemu,"
-PACKAGECONFIG[yajl] = "--with-yajl,--without-yajl,yajl,yajl"
-PACKAGECONFIG[libxl] = "--with-libxl=${STAGING_DIR_TARGET}/lib,--without-libxl,xen,"
-PACKAGECONFIG[openvz] = "--with-openvz,--without-openvz,,"
-PACKAGECONFIG[vmware] = "--with-vmware,--without-vmware,,"
-PACKAGECONFIG[vbox] = "--with-vbox,--without-vbox,,"
-PACKAGECONFIG[esx] = "--with-esx,--without-esx,,"
-PACKAGECONFIG[hyperv] = "--with-hyperv,--without-hyperv,,"
-PACKAGECONFIG[polkit] = "--with-polkit,--without-polkit,polkit,polkit"
-PACKAGECONFIG[lxc] = "--with-lxc,--without-lxc, lxc,"
-PACKAGECONFIG[test] = "--with-test=yes,--with-test=no,,"
-PACKAGECONFIG[remote] = "--with-remote,--without-remote,,"
-PACKAGECONFIG[macvtap] = "--with-macvtap=yes,--with-macvtap=no,libnl,libnl"
-PACKAGECONFIG[libvirtd] = "--with-libvirtd,--without-libvirtd,,"
-PACKAGECONFIG[netcf] = "--with-netcf,--without-netcf,netcf,netcf"
-PACKAGECONFIG[dtrace] = "--with-dtrace,--without-dtrace,,"
-PACKAGECONFIG[udev] = "--with-udev --with-pciaccess,--without-udev,udev libpciaccess,"
-PACKAGECONFIG[selinux] = "--with-selinux,--without-selinux,libselinux,"
-PACKAGECONFIG[ebtables] = "ac_cv_path_EBTABLES_PATH=/sbin/ebtables,ac_cv_path_EBTABLES_PATH=,ebtables,ebtables"
+PACKAGECONFIG[qemu] = "-Ddriver_qemu=enabled -Dqemu_user=qemu -Dqemu_group=qemu,-Dqemu=disabled,qemu,"
+PACKAGECONFIG[yajl] = "-Dyajl=enabled,-Dyajl=disabled,yajl,yajl"
+PACKAGECONFIG[libxl] = "-Dlibxl=${STAGING_DIR_TARGET}/lib,,xen,"
+PACKAGECONFIG[openvz] = "-Ddriver_openvz=enabled,-Ddriver_openvz=disabled,,"
+PACKAGECONFIG[vmware] = "-Ddriver_vmware=enabled,-Ddriver_vmware=disabled,,"
+PACKAGECONFIG[vbox] = "-Ddriver_vbox=enabled,-Ddriver_vbox=disabled,,"
+PACKAGECONFIG[esx] = "-Ddriver_esx=enabled,-Ddriver_esx=disabled,,"
+PACKAGECONFIG[hyperv] = "-Ddriver_hyperv=enabled,-Ddriver_hyperv=disabled,,"
+PACKAGECONFIG[polkit] = "-Dpolkit=enabled,-Dpolkit=disabled,polkit,polkit"
+PACKAGECONFIG[lxc] = "-Ddriver_lxc=enabled,-Ddriver_lxc=disabled,lxc,"
+PACKAGECONFIG[test] = "-Ddriver_test=enabled,-Ddriver_test=disabled,,"
+PACKAGECONFIG[remote] = "-Ddriver_remote=enabled,-Ddriver_remote=disabled,,"
+PACKAGECONFIG[libvirtd] = "-Ddriver_libvirtd=enabled,-Ddriver_libvirtd=disabled,,"
+PACKAGECONFIG[netcf] = "-Dnetcf=enabled,-Dnetcf=disabled,netcf,netcf"
+PACKAGECONFIG[dtrace] = "-Ddtrace=enabled,-Ddtrace=disabled,,"
+PACKAGECONFIG[udev] = "-Dudev=enabled -Dpciaccess=enabled,-Dudev=disabled,udev libpciaccess,"
+PACKAGECONFIG[selinux] = "-Dselinux=enabled,-Dselinux=disabled,libselinux,"
PACKAGECONFIG[python] = ",,python3,"
-PACKAGECONFIG[sasl] = "--with-sasl,--without-sasl,cyrus-sasl,cyrus-sasl"
-PACKAGECONFIG[iproute2] = "ac_cv_path_IP_PATH=/sbin/ip,ac_cv_path_IP_PATH=,iproute2,iproute2"
-PACKAGECONFIG[numactl] = "--with-numactl,--without-numactl,numactl,"
-PACKAGECONFIG[fuse] = "--with-fuse,--without-fuse,fuse,"
-PACKAGECONFIG[audit] = "--with-audit,--without-audit,audit,"
-PACKAGECONFIG[libcap-ng] = "--with-capng,--without-capng,libcap-ng,"
-PACKAGECONFIG[wireshark] = "--with-wireshark-dissector,--without-wireshark-dissector,wireshark libwsutil,"
-PACKAGECONFIG[apparmor-profiles] = "--with-apparmor-profiles, --without-apparmor-profiles,"
-PACKAGECONFIG[firewalld] = "--with-firewalld, --without-firewalld,"
-PACKAGECONFIG[libpcap] = "--with-libpcap, --without-libpcap,libpcap,libpcap"
-PACKAGECONFIG[numad] = "--with-numad, --without-numad,"
+PACKAGECONFIG[sasl] = "-Dsasl=enabled,-Dsasl=disabled,cyrus-sasl,cyrus-sasl"
+PACKAGECONFIG[numactl] = "-Dnumactl=enabled,-Dnumactl=disabled,numactl,"
+PACKAGECONFIG[fuse] = "-Dfuse=enabled,-Dfuse=disabled,fuse,"
+PACKAGECONFIG[audit] = "-Daudit=enabled,-Daudit=disabled,audit,"
+PACKAGECONFIG[libcap-ng] = "-Dcapng=enabled,-Dcapng=disabled,libcap-ng,"
+PACKAGECONFIG[wireshark] = "-Dwireshark_dissector=enabled,-Dwireshark_dissector=disabled,wireshark libwsutil,"
+PACKAGECONFIG[apparmor_profiles] = "-Dapparmor_profiles=true, -Dapparmor_profiles=false,"
+PACKAGECONFIG[firewalld] = "-Dfirewalld=enabled, -Dfirewalld=disabled,"
+PACKAGECONFIG[libpcap] = "-Dlibpcap=enabled, -Dlibpcap=disabled,libpcap,libpcap"
+PACKAGECONFIG[numad] = "-Dnumad=enabled, -Dnumad=disabled,"

# Enable the Python tool support
require libvirt-python.inc
@@ -255,7 +198,7 @@ do_compile() {

cd ${B}
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:${B}/src:"
- oe_runmake all
+ ninja all
}

do_install_prepend() {
@@ -278,6 +221,8 @@ do_install_append() {
fi

if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+ mkdir -p ${D}/lib
+ mv ${D}/usr/lib/systemd ${D}/lib
# This variable is used by libvirtd.service to start libvirtd in the right mode
sed -i '/#LIBVIRTD_ARGS="--listen"/a LIBVIRTD_ARGS="--listen --daemon"' ${D}/${sysconfdir}/sysconfig/libvirtd

@@ -360,7 +305,7 @@ do_install_append() {
# connection via 127.0.0.1 is available out of box.
install -d ${D}/etc/pki/CA
install -d ${D}/etc/pki/libvirt/private
- install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
+ install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
install -m 0644 ${WORKDIR}/cakey.pem ${D}/${sysconfdir}/pki/libvirt/private/cakey.pem
install -m 0644 ${WORKDIR}/cacert.pem ${D}/${sysconfdir}/pki/CA/cacert.pem
install -m 0644 ${WORKDIR}/serverkey.pem ${D}/${sysconfdir}/pki/libvirt/private/serverkey.pem
@@ -376,10 +321,10 @@ do_install_append() {
chmod 4755 ${D}${bindir}/virt-login-shell
}

-EXTRA_OECONF += " \
- --with-init-script=systemd \
- --with-test-suite \
- --with-runstatedir=/run \
+EXTRA_OEMESON += " \
+ -Dinit_script=systemd \
+ -Drunstatedir=/run \
+ -Dtests=enabled \
"

# gcc9 end up mis-compiling qemuxml2argvtest.o with Og which then
@@ -392,11 +337,11 @@ EXTRA_OEMAKE = "BUILD_DIR=${B} DEST_DIR=${D}${PTEST_PATH} PTEST_DIR=${PTEST_PATH
PRIVATE_LIBS_${PN}-ptest_append = "libvirt-admin.so.0"

do_compile_ptest() {
- oe_runmake -C tests buildtest-TESTS
+ ninja -C tests buildtest-TESTS
}

do_install_ptest() {
- oe_runmake -C tests install-ptest
+ ninja -C tests install-ptest

find ${S}/tests -maxdepth 1 -type d -exec cp -r {} ${D}${PTEST_PATH}/tests/ \;

--
2.27.0


Re: [PATCH] xen: drop i686 support also from xen-tools/xen-python2

Christopher Clark
 

On Sun, Apr 4, 2021 at 2:26 AM Martin Jansa <martin.jansa@...> wrote:

* this commit seems no longer true for current version of xen:
commit a0964e2044cb1ccdd4f64173658ce7602257ff48
Author: Christopher Clark <christopher.w.clark@...>
Date: Tue Feb 25 16:16:00 2020 -0800

xen, xen-tools: separate COMPATIBLE_HOST for hypervisor and tools

The tools have broader platform compatibility than the hypervisor.

* xen-tools are failing to build for qemux86 as shown in:
http://errors.yoctoproject.org/Errors/Details/575367/

make[8]: Entering directory 'TOPDIR/tmp-glibc/work/core2-32-oe-linux/xen-tools/4.14+stableAUTOINC+ad844aa352-r0/git/tools/firmware/xen-dir/xen-root/xen'
echo "*** Xen x86/32 target no longer supported!"
*** Xen x86/32 target no longer supported!
make[8]: Leaving directory 'TOPDIR/tmp-glibc/work/core2-32-oe-linux/xen-tools/4.14+stableAUTOINC+ad844aa352-r0/git/tools/firmware/xen-dir/xen-root/xen'
ln -sf xen-root/xen/xen xen-shim
ln -sf xen-root/xen/xen-syms xen-shim-syms
...
install: cannot stat 'xen-dir/xen-shim': No such file or directory
make[4]: *** [Makefile:51: install] Error 1

revert the commit and also drop i686 from map_xen_arch
Thanks for reporting this, Martin. I need to look into this. I can see
why this particular part of the tools build is not suitable for x86/32
but I don't think that it necessarily means that the entire suite of
xen-tools should be removed with it for x86/32, and if not then this
won't be the change that we will want to fix this build issue.

Christopher



Signed-off-by: Martin Jansa <Martin.Jansa@...>
---
recipes-extended/xen/xen-arch.inc | 3 +--
recipes-extended/xen/xen-hypervisor.inc | 3 ---
recipes-extended/xen/xen-python2.bb | 3 ---
recipes-extended/xen/xen-tools.inc | 2 --
recipes-extended/xen/xen.inc | 2 ++
5 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/recipes-extended/xen/xen-arch.inc b/recipes-extended/xen/xen-arch.inc
index fb0093e..9676045 100644
--- a/recipes-extended/xen/xen-arch.inc
+++ b/recipes-extended/xen/xen-arch.inc
@@ -8,8 +8,7 @@ def map_xen_arch(a, d):
import re
valid_archs = d.getVar('valid_xen_archs').split()

- if re.match("i.86", a): return "x86_32"
- elif re.match("x86.64", a): return "x86_64"
+ if re.match("x86.64", a): return "x86_64"
elif re.match("arm.*", a): return "arm32"
elif re.match("aarch64.*", a): return "arm64"
elif a in valid_archs: return a
diff --git a/recipes-extended/xen/xen-hypervisor.inc b/recipes-extended/xen/xen-hypervisor.inc
index 916bd3c..d8e57e2 100644
--- a/recipes-extended/xen/xen-hypervisor.inc
+++ b/recipes-extended/xen/xen-hypervisor.inc
@@ -6,9 +6,6 @@ DESCRIPTION = "The Xen hypervisor"
# this allows for varying the target architecture or toolchain used
# to build the different components. eg. 32-bit tools and a 64-bit hypervisor.

-# The Xen hypervisor has a narrower compatible platform range than the Xen tools
-COMPATIBLE_HOST = '(x86_64.*).*-linux|aarch64.*-linux|arm-.*-linux-gnueabi'
-
inherit deploy python3native cml1

PACKAGES = " \
diff --git a/recipes-extended/xen/xen-python2.bb b/recipes-extended/xen/xen-python2.bb
index ad3c1fd..08d8e92 100644
--- a/recipes-extended/xen/xen-python2.bb
+++ b/recipes-extended/xen/xen-python2.bb
@@ -6,9 +6,6 @@ SECTION = "console/tools"

SRCREV ?= "a5fcafbfbee55261853fba07149c1c795f2baf58"

-# The same restriction as xen-tools.inc, because of the dependency on xen-tools-xentrace from xen-tools-xentrace-format
-COMPATIBLE_HOST = 'i686-.*-linux|(x86_64.*).*-linux|aarch64.*-linux|arm-.*-linux-gnueabi'
-
XEN_REL ?= "4.12"
XEN_BRANCH ?= "stable-4.12"

diff --git a/recipes-extended/xen/xen-tools.inc b/recipes-extended/xen/xen-tools.inc
index 722c503..35d0c58 100644
--- a/recipes-extended/xen/xen-tools.inc
+++ b/recipes-extended/xen/xen-tools.inc
@@ -1,8 +1,6 @@
SUMMARY = "Xen hypervisor tools"
DESCRIPTION = "Tools and utility software for the Xen hypervisor"

-COMPATIBLE_HOST = 'i686-.*-linux|(x86_64.*).*-linux|aarch64.*-linux|arm-.*-linux-gnueabi'
-
inherit setuptools3 update-rc.d systemd deploy
require xen-blktap.inc

diff --git a/recipes-extended/xen/xen.inc b/recipes-extended/xen/xen.inc
index 9e8fcad..8277939 100644
--- a/recipes-extended/xen/xen.inc
+++ b/recipes-extended/xen/xen.inc
@@ -2,6 +2,8 @@ HOMEPAGE = "http://xen.org"
LICENSE = "GPLv2"
SECTION = "console/tools"

+COMPATIBLE_HOST = '(x86_64.*).*-linux|aarch64.*-linux|arm-.*-linux-gnueabi'
+
inherit autotools-brokensep

require xen-arch.inc
--
2.30.2


Re: [PATCH 3/5] cri-o, podman, packagegroup-container: replace anonymous python function calling bb.parse.SkipRecipe with conditional PNBLACKLISTs

Bruce Ashfield
 

On Tue, Apr 6, 2021 at 9:19 AM Martin Jansa <martin.jansa@...> wrote:

On Tue, Apr 06, 2021 at 08:58:13AM -0400, Bruce Ashfield wrote:
On Sat, Apr 3, 2021 at 3:51 PM Martin Jansa <Martin.Jansa@...> wrote:

* PNBLACKLISTs are IMHO a bit easier to read and easier to override from distro
which e.g. provides own recipe for libseccomp
Thanks Martin,

I'm trying to decide if I should just give up and make meta-security a
hard/full layer dependency. More and more of the container components
just don't work if we don't have seccomp enabled.
Agreed, but Armin also mentioned that he plans to send libseccomp to
meta-oe, so this PNBLACKLIST change should be only temporary until that happens.
Thanks for the detailed description, it helps me understand how things
are being used and gives me things to check before merging potential
breakages.

As it turns out, there was a yocto meeting today and where libseccomp
lives came up. There seems to be a consensus that it should end up in
oe-core (and at the very least meta-oe), so this will work itself out over
time.

So I went ahead and merged everything as-is, since we might as well
keep the optional meta-security dependency for now, and revisit with
libseccomp moves.

And I can imagine some people pulling libseccomp to their layer already
(instead of adding whole meta-security) and then being able to simply
set PNBLACKLIST to empty for these recipes would be much easier than
undoing the anonymous python (witch is imho impossible without
overlaying whole recipe except the function).
Agreed.


But I agree that the blacklist technique is easier to read than the
proliferating anonymous python. I'll merge it while I ponder the above
question.

On that topic, would adding meta-security as a layer dependency cause
any issues in your setup/distros/builds ?
I wouldn't call it my setup anymore, but I'm just going through
PNBLACKLISTs used in webOS OSE:
https://github.com/webosose/meta-webosose/blob/master/meta-webos/conf/distro/include/webos-recipe-blacklist.inc
https://github.com/webosose/meta-webosose/blob/master/meta-webos-virtualization/conf/layer.conf#L19

and fixing some of them or moving them to the layer where the issue is
introduced.
Aha!


In webOS OSE setup this libseccomp issue is kind of special, because it
already includes meta-security layer, but BBMASKs all its content except
smack recipes which are actively used:
https://github.com/webosose/meta-webosose/blob/master/meta-webos-smack/conf/layer.conf#L10
so these 3-4 PNBLACKLISTs will need to stay in OSE anyway even with the
conditional on security-layer, I'll just move it to meta-webos-smack
where the BBMASK is being set:
https://github.com/shr-project/meta-webosose/commit/430589dbae6c8616d69692e65a3da40d2b192277
at least until libseccomp is in meta-oe and I'll be able to drop this as
well.

And who know when LGE will update webOS OSE from currently used dunfell
release, so whatever you decide in meta-virtualization is fine with me
:).
Gotcha.

Again, thanks for the detailed explanation.

Bruce


Cheers,

Signed-off-by: Martin Jansa <Martin.Jansa@...>
---
recipes-containers/cri-o/cri-o_git.bb | 16 +---------------
recipes-containers/podman/podman_git.bb | 10 +---------
.../packagegroups/packagegroup-container.bb | 10 +---------
3 files changed, 3 insertions(+), 33 deletions(-)

diff --git a/recipes-containers/cri-o/cri-o_git.bb b/recipes-containers/cri-o/cri-o_git.bb
index 2d6187a..0ac5ddc 100644
--- a/recipes-containers/cri-o/cri-o_git.bb
+++ b/recipes-containers/cri-o/cri-o_git.bb
@@ -43,21 +43,7 @@ RDEPENDS_${PN} = " \
libdevmapper \
"

-python __anonymous() {
- msg = ""
- # ERROR: Nothing PROVIDES 'libseccomp' (but /buildarea/layers/meta-virtualization/recipes-containers/cri-o/cri-o_git.bb DEPENDS on or otherwise requires it).
- # ERROR: Required build target 'meta-world-pkgdata' has no buildable providers.
- # Missing or unbuildable dependency chain was: ['meta-world-pkgdata', 'cri-o', 'libseccomp']
- if 'security' not in d.getVar('BBFILE_COLLECTIONS').split():
- msg += "Make sure meta-security should be present as it provides 'libseccomp'"
- raise bb.parse.SkipRecipe(msg)
- # ERROR: Nothing PROVIDES 'libselinux' (but /buildarea/layers/meta-virtualization/recipes-containers/cri-o/cri-o_git.bb DEPENDS on or otherwise requires it).
- # ERROR: Required build target 'meta-world-pkgdata' has no buildable providers.
- # Missing or unbuildable dependency chain was: ['meta-world-pkgdata', 'cri-o', 'libselinux']
- elif 'selinux' not in d.getVar('BBFILE_COLLECTIONS').split():
- msg += "Make sure meta-selinux should be present as it provides 'libselinux'"
- raise bb.parse.SkipRecipe(msg)
-}
+PNBLACKLIST[cri-o] ?= "${@bb.utils.contains('BBFILE_COLLECTIONS', 'security', bb.utils.contains('BBFILE_COLLECTIONS', 'selinux', '', 'Depends on libselinux from meta-selinux which is not included', d), 'Depends on libseccomp from meta-security which is not included', d)}"

PACKAGES =+ "${PN}-config"

diff --git a/recipes-containers/podman/podman_git.bb b/recipes-containers/podman/podman_git.bb
index a552a7f..62ae024 100644
--- a/recipes-containers/podman/podman_git.bb
+++ b/recipes-containers/podman/podman_git.bb
@@ -14,15 +14,7 @@ DEPENDS = " \
${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)} \
"

-python __anonymous() {
- msg = ""
- # ERROR: Nothing PROVIDES 'libseccomp' (but meta-virtualization/recipes-containers/podman/ DEPENDS on or otherwise requires it).
- # ERROR: Required build target 'meta-world-pkgdata' has no buildable providers.
- # Missing or unbuildable dependency chain was: ['meta-world-pkgdata', 'podman', 'libseccomp']
- if 'security' not in d.getVar('BBFILE_COLLECTIONS').split():
- msg += "Make sure meta-security should be present as it provides 'libseccomp'"
- raise bb.parse.SkipRecipe(msg)
-}
+PNBLACKLIST[podman] ?= "${@bb.utils.contains('BBFILE_COLLECTIONS', 'security', '', 'Depends on libseccomp from meta-security which is not included', d)}"

SRCREV = "288fb688964cb7fc7086d0728daa1f5f6b726dd6"
SRC_URI = " \
diff --git a/recipes-core/packagegroups/packagegroup-container.bb b/recipes-core/packagegroups/packagegroup-container.bb
index b3b0d4c..b06a7c7 100644
--- a/recipes-core/packagegroups/packagegroup-container.bb
+++ b/recipes-core/packagegroups/packagegroup-container.bb
@@ -44,12 +44,4 @@ RDEPENDS_packagegroup-containerd = " \
virtual/containerd \
"

-python __anonymous() {
- msg = ""
- # ERROR: Nothing PROVIDES 'libseccomp' (but meta-virtualization/recipes-containers/podman/ DEPENDS on or otherwise requires it).
- # ERROR: Required build target 'meta-world-pkgdata' has no buildable providers.
- # Missing or unbuildable dependency chain was: ['meta-world-pkgdata', 'podman', 'libseccomp']
- if 'security' not in d.getVar('BBFILE_COLLECTIONS').split():
- msg += "Make sure meta-security should be present as it provides 'libseccomp'"
- raise bb.parse.SkipRecipe(msg)
-}
+PNBLACKLIST[packagegroup-container] ?= "${@bb.utils.contains('BBFILE_COLLECTIONS', 'security', '', 'Depends on podman which depends on libseccomp from meta-security which is not included', d)}"
--
2.30.2




--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II


Re: [PATCH 1/2] dev86: upgrade to 0.16.21 and fix SRC_URI

Bruce Ashfield
 

This looks fine to me,

But I'll wait to get Christopher's Ack before pulling it in.

Bruce

In message: [meta-virtualization][PATCH 1/2] dev86: upgrade to 0.16.21 and fix SRC_URI
on 04/04/2021 Martin Jansa wrote:

* don't use github archives
* upgrade to fix build with security-flags.inc enabled, fixed upstream in:
https://github.com/lkundrak/dev86/commit/537e806f8c62b26c5d5fa912f383f4a7d558574d

Signed-off-by: Martin Jansa <Martin.Jansa@...>
---
.../dev86/{dev86_0.16.20.bb => dev86_0.16.21.bb} | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
rename recipes-extended/dev86/{dev86_0.16.20.bb => dev86_0.16.21.bb} (76%)

diff --git a/recipes-extended/dev86/dev86_0.16.20.bb b/recipes-extended/dev86/dev86_0.16.21.bb
similarity index 76%
rename from recipes-extended/dev86/dev86_0.16.20.bb
rename to recipes-extended/dev86/dev86_0.16.21.bb
index d93e487..d38f7bd 100644
--- a/recipes-extended/dev86/dev86_0.16.20.bb
+++ b/recipes-extended/dev86/dev86_0.16.21.bb
@@ -3,14 +3,11 @@ HOMEPAGE = "http://www.debath.co.uk/dev86/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=8ca43cbc842c2336e835926c2166c28b"
SECTION = "console/tools"
-PR="r0"

-SRC_URI="https://github.com/lkundrak/dev86/archive/v${PV}.tar.gz"
+SRCREV = "c6f36cbafa979710b809f117562773dbd6825918"
+SRC_URI = "git://github.com/lkundrak/${BPN}.git;protocol=https"

-SRC_URI[md5sum] = "288af53f256300777efc91d97c082fda"
-SRC_URI[sha256sum] = "533f2a0d2ed61223040f27e5cd007a11d969aaf34f6b709ece122b1e6fc50580"
-
-S = "${WORKDIR}/dev86-${PV}"
+S = "${WORKDIR}/git"

BBCLASSEXTEND = "native"
EXTRA_OEMAKE = "VERSION=${PV} PREFIX=${prefix} DIST=${D}"
--
2.30.2



Re: [PATCH 1/2] dev86: upgrade to 0.16.21 and fix SRC_URI

Bruce Ashfield
 

merged

Bruce

In message: [meta-virtualization][PATCH 1/2] dev86: upgrade to 0.16.21 and fix SRC_URI
on 04/04/2021 Martin Jansa wrote:

* don't use github archives
* upgrade to fix build with security-flags.inc enabled, fixed upstream in:
https://github.com/lkundrak/dev86/commit/537e806f8c62b26c5d5fa912f383f4a7d558574d

Signed-off-by: Martin Jansa <Martin.Jansa@...>
---
.../dev86/{dev86_0.16.20.bb => dev86_0.16.21.bb} | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
rename recipes-extended/dev86/{dev86_0.16.20.bb => dev86_0.16.21.bb} (76%)

diff --git a/recipes-extended/dev86/dev86_0.16.20.bb b/recipes-extended/dev86/dev86_0.16.21.bb
similarity index 76%
rename from recipes-extended/dev86/dev86_0.16.20.bb
rename to recipes-extended/dev86/dev86_0.16.21.bb
index d93e487..d38f7bd 100644
--- a/recipes-extended/dev86/dev86_0.16.20.bb
+++ b/recipes-extended/dev86/dev86_0.16.21.bb
@@ -3,14 +3,11 @@ HOMEPAGE = "http://www.debath.co.uk/dev86/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=8ca43cbc842c2336e835926c2166c28b"
SECTION = "console/tools"
-PR="r0"

-SRC_URI="https://github.com/lkundrak/dev86/archive/v${PV}.tar.gz"
+SRCREV = "c6f36cbafa979710b809f117562773dbd6825918"
+SRC_URI = "git://github.com/lkundrak/${BPN}.git;protocol=https"

-SRC_URI[md5sum] = "288af53f256300777efc91d97c082fda"
-SRC_URI[sha256sum] = "533f2a0d2ed61223040f27e5cd007a11d969aaf34f6b709ece122b1e6fc50580"
-
-S = "${WORKDIR}/dev86-${PV}"
+S = "${WORKDIR}/git"

BBCLASSEXTEND = "native"
EXTRA_OEMAKE = "VERSION=${PV} PREFIX=${prefix} DIST=${D}"
--
2.30.2



Re: [PATCH] libvirt: uprev v6.3 -> v7.2

Bruce Ashfield
 

In message: [meta-virtualization][PATCH] libvirt: uprev v6.3 -> v7.2
on 02/04/2021 Xu, Yanfei wrote:

From: Yanfei Xu <yanfei.xu@...>

This upgrade spans 9 small release. The detailed realese logs could
refer to: https://gitlab.com/libvirt/libvirt/-/blob/master/NEWS.rst

Libvirt's buildsystem has changed to meson, So this upgrade drop some
obsolete patches applied to makefile.

Due to libvirt's meson currently doesn't support to explicit the runtime
binaries path. I made a patch which is
0001-meson-add-options-to-explicit-binaries-path.patch for solving the
problem.
We've tranditionally had runtime issues each time libvirt was
uprev'd.

Can you summarize the testing that you did after the upgrade ?

Bruce


Signed-off-by: Yanfei Xu <yanfei.xu@...>
---
recipes-extended/libvirt/libvirt-python.inc | 4 +-
...drop-unnecessary-libgnu.la-reference.patch | 31 ----
...dd-options-to-explicit-binaries-path.patch | 86 ++++++++++
.../libvirt/0001-to-fix-build-error.patch | 47 -----
...-search-for-rpc-rpc.h-in-the-sysroot.patch | 34 ----
.../libvirt/install-missing-file.patch | 50 ------
...read-safety-in-lxc-callback-handling.patch | 63 -------
...virt-use-pkg-config-to-locate-libcap.patch | 43 -----
.../libvirt/qemu-fix-crash-in-qemuOpen.patch | 39 -----
.../libvirt/libvirt/runptest.patch | 116 -------------
...t-net-rpc-to-virt-host-validate-when.patch | 91 ----------
.../{libvirt_6.3.0.bb => libvirt_7.2.0.bb} | 161 ++++++------------
12 files changed, 141 insertions(+), 624 deletions(-)
delete mode 100644 recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
create mode 100644 recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
delete mode 100644 recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
delete mode 100644 recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
delete mode 100644 recipes-extended/libvirt/libvirt/install-missing-file.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
delete mode 100644 recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
delete mode 100644 recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
delete mode 100644 recipes-extended/libvirt/libvirt/runptest.patch
delete mode 100644 recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
rename recipes-extended/libvirt/{libvirt_6.3.0.bb => libvirt_7.2.0.bb} (69%)

diff --git a/recipes-extended/libvirt/libvirt-python.inc b/recipes-extended/libvirt/libvirt-python.inc
index bcd76572..0c661af8 100644
--- a/recipes-extended/libvirt/libvirt-python.inc
+++ b/recipes-extended/libvirt/libvirt-python.inc
@@ -17,8 +17,8 @@ FILES_${PN}-python = "${bindir}/* ${libdir}/* ${libdir}/${PYTHON_DIR}/*"

SRC_URI += "http://libvirt.org/sources/python/libvirt-python-${PV}.tar.gz;name=libvirt_python"

-SRC_URI[libvirt_python.md5sum] = "4cf898350ee9a47f94986d402c153bdb"
-SRC_URI[libvirt_python.sha256sum] = "c772421ecc144f098f4ab15db700c62db9b9e6e76b876217edcfd62e9ce02750"
+SRC_URI[libvirt_python.md5sum] = "19bf22414a43d358581b9259b52047a7"
+SRC_URI[libvirt_python.sha256sum] = "c0c3bac54c55622e17927b09cd9843869600d71842fb072c99491fe2608dcee7"

export LIBVIRT_API_PATH = "${S}/docs/libvirt-api.xml"
export LIBVIRT_CFLAGS = "-I${S}/include"
diff --git a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch b/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
deleted file mode 100644
index f02a5d64..00000000
--- a/recipes-extended/libvirt/libvirt/0001-build-drop-unnecessary-libgnu.la-reference.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 30a056069cb35804434fb036e51ae97f33c02025 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Sat, 7 Mar 2020 21:36:27 -0500
-Subject: [PATCH] build: drop unnecessary libgnu.la reference
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-
----
- tools/Makefile.am | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 2a0a989..93fe283 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -168,7 +168,6 @@ virt_host_validate_LDADD = \
-
- if WITH_GNUTLS
- virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
-@@ -270,7 +269,6 @@ BUILT_SOURCES =
-
- if WITH_GNUTLS
- virsh_LDADD += ../src/libvirt-net-rpc.la \
-- ../gnulib/lib/libgnu.la \
- $(NULL)
- endif
-
diff --git a/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
new file mode 100644
index 00000000..4c545d4a
--- /dev/null
+++ b/recipes-extended/libvirt/libvirt/0001-meson-add-options-to-explicit-binaries-path.patch
@@ -0,0 +1,86 @@
+From 2e061ccf093063267277893cd5cacc9e7188c629 Mon Sep 17 00:00:00 2001
+From: Yanfei Xu <yanfei.xu@...>
+Date: Thu, 25 Mar 2021 16:24:04 +0800
+Subject: [PATCH] meson: add options to explicit binaries path
+
+In cross compile evironment, path of binaries is possiblely different
+between target and host. Let's add options to explicit binaries path
+to solve this problem.
+
+Upstream-Status: Pending
+
+Signed-off-by: Yanfei Xu <yanfei.xu@...>
+---
+ meson.build | 18 ++++++++++++------
+ meson_options.txt | 23 +++++++++++++++++++++++
+ 2 files changed, 35 insertions(+), 6 deletions(-)
+
+diff --git a/meson.build b/meson.build
+index 369548f127..6c93be8e4b 100644
+--- a/meson.build
++++ b/meson.build
+@@ -943,18 +943,24 @@ optional_programs = [
+ 'udevadm',
+ ]
+
++# if -Dxxx-path option is found, use that. Otherwise, check in $PATH,
++# /usr/sbin, /sbin, and fall back to the default from middle column.
+ foreach name : optional_programs
+- prog = find_program(name, required: false, dirs: libvirt_sbin_path)
+ varname = name.underscorify()
+- if prog.found()
+- prog_path = prog.path()
++ prog_path = get_option(name + '-path')
++ if prog_path != ''
++ message('Using @1@ for @0@'.format(name, prog_path))
+ else
+- prog_path = name
++ prog = find_program(name, required: false, dirs: libvirt_sbin_path)
++ if prog.found()
++ prog_path = prog.path()
++ else
++ prog_path = name
++ endif
++ set_variable('@0@_prog'.format(varname), prog)
+ endif
+-
+ conf.set_quoted(varname.to_upper(), prog_path)
+ conf.set_quoted('@0@_PATH'.format(varname.to_upper()), prog_path)
+- set_variable('@0@_prog'.format(varname), prog)
+ endforeach
+
+
+diff --git a/meson_options.txt b/meson_options.txt
+index e5d79c2b6b..f06f46c7bb 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -102,3 +102,26 @@ option('numad', type: 'feature', value: 'auto', description: 'use numad to manag
+ option('pm_utils', type: 'feature', value: 'auto', description: 'use pm-utils for power management')
+ option('sysctl_config', type: 'feature', value: 'auto', description: 'Whether to install sysctl configs')
+ option('tls_priority', type: 'string', value: 'NORMAL', description: 'set the default TLS session priority string')
++
++
++option('addr2line-path', type : 'string', description : 'path to addr2line')
++option('augparse-path', type : 'string', description : 'path to augparse')
++option('dmidecode-path', type : 'string', description : 'path to dmidecode')
++option('dnsmasq-path', type : 'string', description : 'path to dnsmasq')
++option('ebtables-path', type : 'string', description : 'path to ebtables')
++option('flake8-path', type : 'string', description : 'path to flake8')
++option('ip-path', type : 'string', description : 'path to ip')
++option('ip6tables-path', type : 'string', description : 'path to ip6tables')
++option('iptables-path', type : 'string', description : 'path to iptables')
++option('iscsiadm-path', type : 'string', description : 'path to iscsiadm')
++option('mdevctl-path', type : 'string', description : 'path to mdevctl')
++option('mm-ctl-path', type : 'string', description : 'path to mm-ctl')
++option('modprobe-path', type : 'string', description : 'path to modprobe')
++option('ovs-vsctl-path', type : 'string', description : 'path to ovs-vsctl')
++option('pdwtags-path', type : 'string', description : 'path to pdwtags')
++option('radvd-path', type : 'string', description : 'path to radvd')
++option('rmmod-path', type : 'string', description : 'path to rmmod')
++option('scrub-path', type : 'string', description : 'path to scrub')
++option('tc-path', type : 'string', description : 'path to tc')
++option('udevadm-path', type : 'string', description : 'path to udevadm')
++
+--
+2.27.0
+
diff --git a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch b/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
deleted file mode 100644
index b0148e5c..00000000
--- a/recipes-extended/libvirt/libvirt/0001-to-fix-build-error.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 3566bcacaa6408fb8f655d1749a20b2f30e0c765 Mon Sep 17 00:00:00 2001
-From: Lei Maohui <leimaohui@...>
-Date: Fri, 31 Jul 2015 03:17:07 +0900
-Subject: [PATCH] to fix build error
-
-The error likes as following
-
-| Generating internals/command.html.tmp
-| /bin/sh: line 3: internals/command.html.tmp: No such file or directory
-| rm: Generating internals/locking.html.tmp
-| cannot remove `internals/command.html.tmp': No such file or directory
-| make[3]: *** [internals/command.html.tmp] Error 1
-| make[3]: *** Waiting for unfinished jobs....
-
-Signed-off-by: Lei Maohui <leimaohui@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- docs/Makefile.am | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/docs/Makefile.am b/docs/Makefile.am
-index ce3d296..2c8180f 100644
---- a/docs/Makefile.am
-+++ b/docs/Makefile.am
-@@ -366,7 +366,7 @@ EXTRA_DIST= \
- aclperms.htmlinc \
- $(schema_DATA)
-
--acl_generated = aclperms.htmlinc
-+acl.html:: $(srcdir)/aclperms.htmlinc
-
- aclperms.htmlinc: $(top_srcdir)/src/access/viraccessperm.h \
- $(top_srcdir)/scripts/genaclperms.py Makefile.am
-@@ -432,8 +432,7 @@ manpages/%.html.in: manpages/%.rst
- $(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
- $(RST2HTML) --strict $< > $@ || { rm $@ && exit 1; }
-
--%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl \
-- $(acl_generated)
-+%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl
- $(AM_V_GEN)name=`echo $@ | sed -e 's/.tmp//'`; \
- genhtmlin=`echo $@ | sed -e 's/.tmp/.in/'`; \
- rst=`echo $@ | sed -e 's/.html.tmp/.rst/'`; \
diff --git a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch b/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
deleted file mode 100644
index 395d5610..00000000
--- a/recipes-extended/libvirt/libvirt/configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 79f5975db01af0599860ccca7ef44b0e27105a04 Mon Sep 17 00:00:00 2001
-From: Mark Asselstine <mark.asselstine@...>
-Date: Thu, 10 May 2018 12:05:04 -0400
-Subject: [PATCH] configure.ac: search for rpc/rpc.h in the sysroot
-
-We want to avoid host contamination and use the sysroot as the base
-directory for our search so add the '=' the the '-I' when searching
-for libtirpc's rpc.h header.
-
-Upstream-Status: Inappropriate [old release]
-
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-xdr.m4 | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/m4/virt-xdr.m4 b/m4/virt-xdr.m4
-index 8375415..12b51f7 100644
---- a/m4/virt-xdr.m4
-+++ b/m4/virt-xdr.m4
-@@ -30,10 +30,10 @@ AC_DEFUN([LIBVIRT_CHECK_XDR], [
- ])
- with_xdr="yes"
-
-- dnl Recent glibc requires -I/usr/include/tirpc for <rpc/rpc.h>
-+ dnl Recent glibc requires -I=/usr/include/tirpc for <rpc/rpc.h>
- old_CFLAGS=$CFLAGS
- AC_CACHE_CHECK([where to find <rpc/rpc.h>], [lv_cv_xdr_cflags], [
-- for add_CFLAGS in '' '-I/usr/include/tirpc' 'missing'; do
-+ for add_CFLAGS in '' '-I=/usr/include/tirpc' 'missing'; do
- if test x"$add_CFLAGS" = xmissing; then
- lv_cv_xdr_cflags=missing; break
- fi
diff --git a/recipes-extended/libvirt/libvirt/install-missing-file.patch b/recipes-extended/libvirt/libvirt/install-missing-file.patch
deleted file mode 100644
index 6aa36df8..00000000
--- a/recipes-extended/libvirt/libvirt/install-missing-file.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From aa75f5136066d239d48a21373b3d96ee12378e8d Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 17:24:17 +0800
-Subject: [PATCH] Install missing conf file
-
-openvzutilstest.conf file is needed by openvzutilstest test.
-
-Upstream-Status: Inapproriate
-
-Signed-off-by: Catalin Enache <catalin.enache@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index 4a808dd..0c3e799 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -173,6 +173,7 @@ EXTRA_DIST = \
- $(NULL)
-
- test_helpers = commandhelper ssh
-+test_misc =
- test_programs = virshtest sockettest \
- virhostcputest virbuftest \
- commandtest seclabeltest \
-@@ -311,6 +312,7 @@ endif WITH_LXC
-
- if WITH_OPENVZ
- test_programs += openvzutilstest
-+test_misc += openvzutilstest.conf
- endif WITH_OPENVZ
-
- if WITH_ESX
-@@ -1551,7 +1553,7 @@ endif ! WITH_LINUX
-
- buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-
--PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+PTESTS = $(TESTS) $(test_helpers) $(test_misc) test-lib.sh virschematest
-
- install-ptest:
- list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
diff --git a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch b/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
deleted file mode 100644
index 558d5ef6..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-1.0.3-fix-thread-safety-in-lxc-callback-handling.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From ad5d9cee87357f9f38f62583119606ef95ba10df Mon Sep 17 00:00:00 2001
-From: Bogdan Purcareata <bogdan.purcareata@...>
-Date: Fri, 24 May 2013 16:46:00 +0300
-Subject: [PATCH] Fix thread safety in LXC callback handling
-
-Signed-off-by: Bogdan Purcareata <bogdan.purcareata@...>
----
- src/lxc/lxc_process.c | 18 +++++++++++++++++-
- 1 file changed, 17 insertions(+), 1 deletion(-)
-
-diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
-index aaa81a7..0eadc67 100644
---- a/src/lxc/lxc_process.c
-+++ b/src/lxc/lxc_process.c
-@@ -609,8 +609,13 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- virLXCProtocolExitStatus status,
- virDomainObjPtr vm)
- {
-+ virLXCDriverPtr driver = lxc_driver;
- virLXCDomainObjPrivatePtr priv = vm->privateData;
-
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
- switch (status) {
- case VIR_LXC_PROTOCOL_EXIT_STATUS_SHUTDOWN:
- priv->stopReason = VIR_DOMAIN_EVENT_STOPPED_SHUTDOWN;
-@@ -628,6 +633,8 @@ static void virLXCProcessMonitorExitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- }
- VIR_DEBUG("Domain shutoff reason %d (from status %d)",
- priv->stopReason, status);
-+
-+ virObjectUnlock(vm);
- }
-
- /* XXX a little evil */
-@@ -636,12 +643,21 @@ static void virLXCProcessMonitorInitNotify(virLXCMonitorPtr mon ATTRIBUTE_UNUSED
- pid_t initpid,
- virDomainObjPtr vm)
- {
-- virLXCDomainObjPrivatePtr priv = vm->privateData;
-+ virLXCDriverPtr driver = lxc_driver;
-+ virLXCDomainObjPrivatePtr priv;
-+
-+ lxcDriverLock(driver);
-+ virObjectLock(vm);
-+ lxcDriverUnlock(driver);
-+
-+ priv = vm->privateData;
- priv->initpid = initpid;
- virDomainAuditInit(vm, initpid);
-
- if (virDomainSaveStatus(lxc_driver->caps, lxc_driver->stateDir, vm) < 0)
- VIR_WARN("Cannot update XML with PID for LXC %s", vm->def->name);
-+
-+ virObjectUnlock(vm);
- }
-
- static virLXCMonitorCallbacks monitorCallbacks = {
---
-1.7.11.7
-
diff --git a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch b/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
deleted file mode 100644
index 87b55915..00000000
--- a/recipes-extended/libvirt/libvirt/libvirt-use-pkg-config-to-locate-libcap.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 94bd514e1b6e602a48285db94e65050f8f0c2585 Mon Sep 17 00:00:00 2001
-From: Bruce Ashfield <bruce.ashfield@...>
-Date: Wed, 8 Apr 2015 13:03:03 -0400
-Subject: [PATCH] libvirt: use pkg-config to locate libcap
-
-libvirt wants to use pcap-config to locate the exisence and location
-of libpcap. oe-core stubs this script and replaces it with pkg-config,
-which can lead to the host pcap-config triggering and either breaking
-the build or introducing host contamination.
-
-To fix this issue, we patch configure to use 'pkg-config libcap' to
-locate the correct libraries.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[MA: Update to apply agains v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-
----
- m4/virt-libpcap.m4 | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/m4/virt-libpcap.m4 b/m4/virt-libpcap.m4
-index 605c2fd..e0ab018 100644
---- a/m4/virt-libpcap.m4
-+++ b/m4/virt-libpcap.m4
-@@ -23,14 +23,14 @@ AC_DEFUN([LIBVIRT_ARG_LIBPCAP], [
-
- AC_DEFUN([LIBVIRT_CHECK_LIBPCAP], [
- LIBPCAP_REQUIRED="1.5.0"
-- LIBPCAP_CONFIG="pcap-config"
-+ LIBPCAP_CONFIG="pkg-config libpcap"
- LIBPCAP_CFLAGS=""
- LIBPCAP_LIBS=""
-
- if test "x$with_libpcap" != "xno"; then
- case $with_libpcap in
-- ''|yes|check) LIBPCAP_CONFIG="pcap-config" ;;
-- *) LIBPCAP_CONFIG="$with_libpcap/bin/pcap-config" ;;
-+ ''|yes|check) LIBPCAP_CONFIG="pkg-config libpcap" ;;
-+ *) LIBPCAP_CONFIG="$with_libpcap/bin/pkg-config libpcap" ;;
- esac
- AS_IF([test "x$LIBPCAP_CONFIG" != "x"], [
- AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
diff --git a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch b/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
deleted file mode 100644
index 3cf9e839..00000000
--- a/recipes-extended/libvirt/libvirt/qemu-fix-crash-in-qemuOpen.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 74bff2509080912ea8abf1de8fd95fa2412b659a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=A1n=20Tomko?= <jtomko@...>
-Date: Thu, 11 Apr 2013 11:37:25 +0200
-Subject: [PATCH] qemu: fix crash in qemuOpen
-
-commit 74bff2509080912ea8abf1de8fd95fa2412b659a from upsteam
-git://libvirt.org/libvirt.git
-
-If the path part of connection URI is not present, cfg is used
-unitialized.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=950855
----
- src/qemu/qemu_driver.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
-index 2c0d7d1..0d41e39 100644
---- a/src/qemu/qemu_driver.c
-+++ b/src/qemu/qemu_driver.c
-@@ -1026,6 +1026,7 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-+ cfg = virQEMUDriverGetConfig(qemu_driver);
- if (conn->uri->path == NULL) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("no QEMU URI path given, try %s"),
-@@ -1033,7 +1034,6 @@ static virDrvOpenStatus qemuOpen(virConnectPtr conn,
- goto cleanup;
- }
-
-- cfg = virQEMUDriverGetConfig(qemu_driver);
- if (cfg->privileged) {
- if (STRNEQ(conn->uri->path, "/system") &&
- STRNEQ(conn->uri->path, "/session")) {
---
-1.7.1
-
diff --git a/recipes-extended/libvirt/libvirt/runptest.patch b/recipes-extended/libvirt/libvirt/runptest.patch
deleted file mode 100644
index f6bc7736..00000000
--- a/recipes-extended/libvirt/libvirt/runptest.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From d210838a4433dd254c1a11b08b804ebe9ff5f378 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Wed, 8 May 2019 10:20:47 +0800
-Subject: [PATCH] Add 'install-ptest' rule
-
-Change TESTS_ENVIRONMENT to allow running outside build dir.
-
-Upstream-status: Pending
-Signed-off-by: Mihaela Sendrea <mihaela.sendrea@...>
-[KK: Update context for 1.3.5.]
-Signed-off-by: Kai Kang <kai.kang@...>
-[MA: Allow separate source and build dirs]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ZH: add missing test_helper files]
-Signed-off-by: He Zhe <zhe.he@...>
-[MA: Update context for v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[DDU: Update context for v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- tests/Makefile.am | 68 +++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 60 insertions(+), 8 deletions(-)
-
-diff --git a/tests/Makefile.am b/tests/Makefile.am
-index ada5b8f..4a808dd 100644
---- a/tests/Makefile.am
-+++ b/tests/Makefile.am
-@@ -28,11 +28,13 @@ AM_CPPFLAGS = \
-
- WARN_CFLAGS += $(RELAXED_FRAME_LIMIT_CFLAGS)
-
-+PTEST_DIR ?= $(libdir)/libvirt/ptest
-+
- AM_CFLAGS = \
-- -Dabs_builddir="\"$(abs_builddir)\"" \
-- -Dabs_top_builddir="\"$(abs_top_builddir)\"" \
-- -Dabs_srcdir="\"$(abs_srcdir)\"" \
-- -Dabs_top_srcdir="\"$(abs_top_srcdir)\"" \
-+ -Dabs_builddir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_builddir="\"$(PTEST_DIR)\"" \
-+ -Dabs_srcdir="\"$(PTEST_DIR)/tests\"" \
-+ -Dabs_top_srcdir="\"$(PTEST_DIR)\"" \
- $(LIBXML_CFLAGS) \
- $(GLIB_CFLAGS) \
- $(LIBNL_CFLAGS) \
-@@ -474,10 +476,10 @@ TESTS = $(test_programs) \
-
- VIR_TEST_EXPENSIVE ?= $(VIR_TEST_EXPENSIVE_DEFAULT)
- TESTS_ENVIRONMENT = \
-- abs_top_builddir="$(abs_top_builddir)" \
-- abs_top_srcdir="$(abs_top_srcdir)" \
-- abs_builddir="$(abs_builddir)" \
-- abs_srcdir="$(abs_srcdir)" \
-+ abs_top_builddir="$(PTEST_DIR)" \
-+ abs_top_srcdir="$(PTEST_DIR)" \
-+ abs_builddir="$(PTEST_DIR)/tests" \
-+ abs_srcdir="$(PTEST_DIR)/tests" \
- LIBVIRT_AUTOSTART=0 \
- LC_ALL=C \
- VIR_TEST_EXPENSIVE=$(VIR_TEST_EXPENSIVE) \
-@@ -1547,4 +1549,54 @@ else ! WITH_LINUX
- EXTRA_DIST += virscsitest.c
- endif ! WITH_LINUX
-
-+buildtest-TESTS: $(TESTS) $(test_libraries) $(test_helpers)
-+
-+PTESTS = $(TESTS) $(test_helpers) test-lib.sh virschematest
-+
-+install-ptest:
-+ list='$(TESTS) $(test_helpers) test-lib.sh virschematest'
-+ install -d $(DEST_DIR)/tools
-+ @(if [ -d ../tools/.libs ] ; then cd ../tools/.libs; fi; \
-+ install * $(DEST_DIR)/tools)
-+ install -d $(DEST_DIR)/src/network
-+ cp $(top_srcdir)/src/network/*.xml $(DEST_DIR)/src/network
-+ install -d $(DEST_DIR)/src/cpu_map
-+ cp $(top_srcdir)/src/cpu_map/*.xml $(DEST_DIR)/src/cpu_map
-+ install ../src/libvirt_iohelper $(DEST_DIR)/src
-+ install -D ../src/libvirtd $(DEST_DIR)/src/libvirtd
-+ install -d $(DEST_DIR)/src/remote
-+ install -D $(top_srcdir)/../build/src/remote/libvirtd.conf $(DEST_DIR)/src/remote/libvirtd.conf
-+ install -d $(DEST_DIR)/src/remote/.libs
-+ @(if [ -d ../src/remote/.libs ] ; then cd ../src/remote/.libs; fi; \
-+ install * $(DEST_DIR)/src/remote/.libs)
-+ install -d $(DEST_DIR)/src/.libs
-+ @(if [ -d ../src/.libs ] ; then cd ../src/.libs; fi; \
-+ install * $(DEST_DIR)/src/.libs)
-+ install -d $(DEST_DIR)/docs/schemas
-+ cp $(top_srcdir)/docs/schemas/*.rng $(DEST_DIR)/docs/schemas
-+ cp -r $(top_srcdir)/build-aux $(DEST_DIR)
-+ install -d $(DEST_DIR)/examples/xml
-+ cp -r $(top_srcdir)/examples/xml/test $(DEST_DIR)/examples/xml
-+ install -d $(DEST_DIR)/tests/.libs
-+ find . -type d -name "*xml2xml*" -exec cp -r {} $(DEST_DIR)/tests \;
-+ find . -type d -name "*data" -exec cp -r {} $(DEST_DIR)/tests \;
-+ @(for file in $(PTESTS); do \
-+ if [ -f .libs/$$file ]; then \
-+ install .libs/$$file $(DEST_DIR)/tests; \
-+ elif [ -f $(srcdir)/$$file ]; then \
-+ install $(srcdir)/$$file $(DEST_DIR)/tests; \
-+ else \
-+ install $(builddir)/$$file $(DEST_DIR)/tests; \
-+ fi; \
-+ done;)
-+ @(if [ -d .libs ]; then install .libs/*.so $(DEST_DIR)/tests/.libs; fi;)
-+ cp ../config.h $(DEST_DIR)
-+ cp Makefile $(DEST_DIR)/tests
-+ sed -i -e 's/^Makefile:/_Makefile:/' $(DEST_DIR)/tests/Makefile
-+ cp ../Makefile $(DEST_DIR)
-+ sed -i -e 's|^Makefile:|_Makefile:|' $(DEST_DIR)/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/tests/Makefile
-+ sed -i -e 's|$(BUILD_DIR)|$(PTEST_DIR)|g' $(DEST_DIR)/Makefile
-+ sed -i -e 's|^\(.*\.log:\) \(.*EXEEXT.*\)|\1|g' $(DEST_DIR)/tests/Makefile
-+
- CLEANFILES = *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
diff --git a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch b/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
deleted file mode 100644
index bb500fde..00000000
--- a/recipes-extended/libvirt/libvirt/tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 7dc21edd851b260485b432c096f8e90f6fa07778 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke.du@...>
-Date: Tue, 7 May 2019 15:26:32 +0800
-Subject: [PATCH] tools: add libvirt-net-rpc to virt-host-validate when TLS is
- enabled
-
-When gnu-tls is enabled for libvirt references to virNetTLSInit are
-generated in libvirt. Any binaries linking against libvirt, must also
-link against libvirt-net-rpc which provides the implementation.
-
-Signed-off-by: Bruce Ashfield <bruce.ashfield@...>
-[ywei: rebased to libvirt-1.3.2]
-Signed-off-by: Yunguo Wei <yunguo.wei@...>
-[MA: rebase to v4.3.0]
-Signed-off-by: Mark Asselstine <mark.asselstine@...>
-[ddu: rebase to v5.3.0]
-Signed-off-by: Dengke Du <dengke.du@...>
-
----
- examples/Makefile.am | 20 ++++++++++++++++++++
- tools/Makefile.am | 12 ++++++++++++
- 2 files changed, 32 insertions(+)
-
-diff --git a/examples/Makefile.am b/examples/Makefile.am
-index ad635bd..a94f41d 100644
---- a/examples/Makefile.am
-+++ b/examples/Makefile.am
-@@ -74,6 +74,10 @@ LDADD = \
- $(top_builddir)/src/libvirt-admin.la \
- $(NULL)
-
-+if WITH_GNUTLS
-+LDADD += $(top_builddir)/src/libvirt-net-rpc.la
-+endif
-+
- noinst_PROGRAMS = \
- c/admin/client_close \
- c/admin/client_info \
-@@ -111,6 +115,22 @@ c_misc_openauth_SOURCES = c/misc/openauth.c
- examplesdir = $(docdir)/examples
-
- adminexamplesdir = $(examplesdir)/c/admin
-+
-+if WITH_GNUTLS
-+dominfo_info1_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+domsuspend_suspend_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+hellolibvirt_hellolibvirt_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+openauth_openauth_LDADD = $(top_builddir)/src/libvirt-net-rpc.la \
-+ $(LDADD) \
-+ $(NULL)
-+endif
-+
- adminexamples_DATA = $(ADMIN_EXAMPLES)
-
- domainexamplesdir = $(examplesdir)/c/domain
-diff --git a/tools/Makefile.am b/tools/Makefile.am
-index 53df930..2a0a989 100644
---- a/tools/Makefile.am
-+++ b/tools/Makefile.am
-@@ -166,6 +166,12 @@ virt_host_validate_LDADD = \
- $(GLIB_LIBS) \
- $(NULL)
-
-+if WITH_GNUTLS
-+virt_host_validate_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- virt_host_validate_CFLAGS = \
- $(AM_CFLAGS) \
- $(NULL)
-@@ -262,6 +268,12 @@ virt_admin_CFLAGS = \
- $(READLINE_CFLAGS)
- BUILT_SOURCES =
-
-+if WITH_GNUTLS
-+virsh_LDADD += ../src/libvirt-net-rpc.la \
-+ ../gnulib/lib/libgnu.la \
-+ $(NULL)
-+endif
-+
- if WITH_WIN_ICON
- virsh_LDADD += virsh_win_icon.$(OBJEXT)
-
diff --git a/recipes-extended/libvirt/libvirt_6.3.0.bb b/recipes-extended/libvirt/libvirt_7.2.0.bb
similarity index 69%
rename from recipes-extended/libvirt/libvirt_6.3.0.bb
rename to recipes-extended/libvirt/libvirt_7.2.0.bb
index 41abb06f..790071d5 100644
--- a/recipes-extended/libvirt/libvirt_6.3.0.bb
+++ b/recipes-extended/libvirt/libvirt_7.2.0.bb
@@ -18,96 +18,42 @@ RDEPENDS_${PN} = "gettext-runtime"

RDEPENDS_${PN}-ptest += "make gawk perl bash"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd ebtables"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

#connman blocks the 53 port and libvirtd can't start its DNS service
RCONFLICTS_${PN}_libvirtd = "connman"

+HOSTTOOLS_NONFATAL += "getent"
+
SRC_URI = "http://libvirt.org/sources/libvirt-${PV}.tar.xz;name=libvirt \
- file://tools-add-libvirt-net-rpc-to-virt-host-validate-when.patch \
file://libvirtd.sh \
file://libvirtd.conf \
file://dnsmasq.conf \
- file://runptest.patch \
file://run-ptest \
- file://libvirt-use-pkg-config-to-locate-libcap.patch \
- file://0001-to-fix-build-error.patch \
- file://install-missing-file.patch \
file://0001-ptest-Remove-Windows-1252-check-from-esxutilstest.patch \
- file://configure.ac-search-for-rpc-rpc.h-in-the-sysroot.patch \
- file://0001-build-drop-unnecessary-libgnu.la-reference.patch \
file://hook_support.py \
file://gnutls-helper.py \
+ file://0001-meson-add-options-to-explicit-binaries-path.patch \
"

-SRC_URI[libvirt.md5sum] = "1bd4435f77924f5ec9928b538daf4a02"
-SRC_URI[libvirt.sha256sum] = "74069438d34082336e99a88146349e21130552b96efc3b7c562f6878127996f5"
+SRC_URI[libvirt.md5sum] = "92044b629216e44adce63224970a54a3"
+SRC_URI[libvirt.sha256sum] = "01f459d0c7ba5009622a628dba1a026200e8f4a299fea783b936a71d7e0ed1d0"

-inherit autotools gettext update-rc.d pkgconfig ptest systemd useradd perlnative
+inherit meson gettext update-rc.d pkgconfig ptest systemd useradd perlnative
USERADD_PACKAGES = "${PN}"
GROUPADD_PARAM_${PN} = "-r qemu; -r kvm"
USERADD_PARAM_${PN} = "-r -g qemu -G kvm qemu"

-# Override the default set in autotools.bbclass so that we will use relative pathnames
-# to our local m4 files. This prevents an "Argument list too long" error during configuration
-# if our project is in a directory with an absolute pathname of more than about 125 characters.
-#
-acpaths = "-I ./m4"
-
-CACHED_CONFIGUREVARS += "\
-ac_cv_path_XMLCATLOG=/usr/bin/xmlcatalog \
-ac_cv_path_AUGPARSE=/usr/bin/augparse \
-ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \
-ac_cv_path_DNSMASQ=/usr/bin/dnsmasq \
-ac_cv_path_BRCTL=/usr/sbin/brctl \
-ac_cv_path_TC=/sbin/tc \
-ac_cv_path_UDEVADM=/sbin/udevadm \
-ac_cv_path_MODPROBE=/sbin/modprobe \
-ac_cv_path_IP_PATH=/bin/ip \
-ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \
-ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \
-ac_cv_path_MOUNT=/bin/mount \
-ac_cv_path_UMOUNT=/bin/umount \
-ac_cv_path_MKFS=/usr/sbin/mkfs \
-ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \
-ac_cv_path_PVCREATE=/usr/sbin/pvcreate \
-ac_cv_path_VGCREATE=/usr/sbin/vgcreate \
-ac_cv_path_LVCREATE=/usr/sbin/lvcreate \
-ac_cv_path_PVREMOVE=/usr/sbin/pvremove \
-ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
-ac_cv_path_LVREMOVE=/usr/sbin/lvremove \
-ac_cv_path_LVCHANGE=/usr/sbin/lvchange \
-ac_cv_path_VGCHANGE=/usr/sbin/vgchange \
-ac_cv_path_VGSCAN=/usr/sbin/vgscan \
-ac_cv_path_PVS=/usr/sbin/pvs \
-ac_cv_path_VGS=/usr/sbin/vgs \
-ac_cv_path_LVS=/usr/sbin/lvs \
-ac_cv_path_PARTED=/usr/sbin/parted \
-ac_cv_path_DMSETUP=/usr/sbin/dmsetup"
-
-# Ensure that libvirt uses polkit rather than policykit, whether the host has
-# pkcheck installed or not, and ensure the path is correct per our config.
-CACHED_CONFIGUREVARS += "ac_cv_path_PKCHECK_PATH=${bindir}/pkcheck"
-
-# Some other possible paths we are not yet setting
-#ac_cv_path_RPCGEN=
-#ac_cv_path_XSLTPROC=
-#ac_cv_path_RADVD=
-#ac_cv_path_UDEVSETTLE=
-#ac_cv_path_EBTABLES_PATH=
-#ac_cv_path_PKG_CONFIG=
-#ac_cv_path_ac_pt_PKG_CONFIG
-#ac_cv_path_POLKIT_AUTH=
-#ac_cv_path_DTRACE=
-#ac_cv_path_ISCSIADM=
-#ac_cv_path_MSGFMT=
-#ac_cv_path_GMSGFMT=
-#ac_cv_path_XGETTEXT=
-#ac_cv_path_MSGMERGE=
-#ac_cv_path_SCRUB=
-#ac_cv_path_PYTHON=
+
+EXTRA_OEMESON += " \
+ -Dip6tables-path=/usr/sbin/ip6tables \
+ -Ddmidecode-path=/usr/sbin/dmidecode \
+ -Ddnsmasq-path=/usr/bin/dnsmasq \
+ -Diptables-path=/usr/sbin/iptables \
+ -Debtables-path=/sbin/ebtables \
+ "

ALLOW_EMPTY_${PN} = "1"

@@ -191,7 +137,7 @@ PRIVATE_LIBS_${PN}-ptest = " \
# full config
PACKAGECONFIG ??= "gnutls qemu yajl openvz vmware vbox esx iproute2 lxc test \
remote macvtap libvirtd netcf udev python ebtables \
- fuse iproute2 firewalld libpcap \
+ fuse firewalld libpcap \
${@bb.utils.contains('DISTRO_FEATURES', 'selinux', 'selinux audit libcap-ng', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'libxl', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'polkit', 'polkit', '', d)} \
@@ -208,37 +154,34 @@ PACKAGECONFIG_remove_armeb = "numactl"
# enable,disable,depends,rdepends
#
PACKAGECONFIG[gnutls] = ",,,gnutls-bin"
-PACKAGECONFIG[qemu] = "--with-qemu --with-qemu-user=qemu --with-qemu-group=qemu,--without-qemu,qemu,"
-PACKAGECONFIG[yajl] = "--with-yajl,--without-yajl,yajl,yajl"
-PACKAGECONFIG[libxl] = "--with-libxl=${STAGING_DIR_TARGET}/lib,--without-libxl,xen,"
-PACKAGECONFIG[openvz] = "--with-openvz,--without-openvz,,"
-PACKAGECONFIG[vmware] = "--with-vmware,--without-vmware,,"
-PACKAGECONFIG[vbox] = "--with-vbox,--without-vbox,,"
-PACKAGECONFIG[esx] = "--with-esx,--without-esx,,"
-PACKAGECONFIG[hyperv] = "--with-hyperv,--without-hyperv,,"
-PACKAGECONFIG[polkit] = "--with-polkit,--without-polkit,polkit,polkit"
-PACKAGECONFIG[lxc] = "--with-lxc,--without-lxc, lxc,"
-PACKAGECONFIG[test] = "--with-test=yes,--with-test=no,,"
-PACKAGECONFIG[remote] = "--with-remote,--without-remote,,"
-PACKAGECONFIG[macvtap] = "--with-macvtap=yes,--with-macvtap=no,libnl,libnl"
-PACKAGECONFIG[libvirtd] = "--with-libvirtd,--without-libvirtd,,"
-PACKAGECONFIG[netcf] = "--with-netcf,--without-netcf,netcf,netcf"
-PACKAGECONFIG[dtrace] = "--with-dtrace,--without-dtrace,,"
-PACKAGECONFIG[udev] = "--with-udev --with-pciaccess,--without-udev,udev libpciaccess,"
-PACKAGECONFIG[selinux] = "--with-selinux,--without-selinux,libselinux,"
-PACKAGECONFIG[ebtables] = "ac_cv_path_EBTABLES_PATH=/sbin/ebtables,ac_cv_path_EBTABLES_PATH=,ebtables,ebtables"
+PACKAGECONFIG[qemu] = "-Ddriver_qemu=enabled -Dqemu_user=qemu -Dqemu_group=qemu,-Dqemu=disabled,qemu,"
+PACKAGECONFIG[yajl] = "-Dyajl=enabled,-Dyajl=disabled,yajl,yajl"
+PACKAGECONFIG[libxl] = "-Dlibxl=${STAGING_DIR_TARGET}/lib,,xen,"
+PACKAGECONFIG[openvz] = "-Ddriver_openvz=enabled,-Ddriver_openvz=disabled,,"
+PACKAGECONFIG[vmware] = "-Ddriver_vmware=enabled,-Ddriver_vmware=disabled,,"
+PACKAGECONFIG[vbox] = "-Ddriver_vbox=enabled,-Ddriver_vbox=disabled,,"
+PACKAGECONFIG[esx] = "-Ddriver_esx=enabled,-Ddriver_esx=disabled,,"
+PACKAGECONFIG[hyperv] = "-Ddriver_hyperv=enabled,-Ddriver_hyperv=disabled,,"
+PACKAGECONFIG[polkit] = "-Dpolkit=enabled,-Dpolkit=disabled,polkit,polkit"
+PACKAGECONFIG[lxc] = "-Ddriver_lxc=enabled,-Ddriver_lxc=disabled,lxc,"
+PACKAGECONFIG[test] = "-Ddriver_test=enabled,-Ddriver_test=disabled,,"
+PACKAGECONFIG[remote] = "-Ddriver_remote=enabled,-Ddriver_remote=disabled,,"
+PACKAGECONFIG[libvirtd] = "-Ddriver_libvirtd=enabled,-Ddriver_libvirtd=disabled,,"
+PACKAGECONFIG[netcf] = "-Dnetcf=enabled,-Dnetcf=disabled,netcf,netcf"
+PACKAGECONFIG[dtrace] = "-Ddtrace=enabled,-Ddtrace=disabled,,"
+PACKAGECONFIG[udev] = "-Dudev=enabled -Dpciaccess=enabled,-Dudev=disabled,udev libpciaccess,"
+PACKAGECONFIG[selinux] = "-Dselinux=enabled,-Dselinux=disabled,libselinux,"
PACKAGECONFIG[python] = ",,python3,"
-PACKAGECONFIG[sasl] = "--with-sasl,--without-sasl,cyrus-sasl,cyrus-sasl"
-PACKAGECONFIG[iproute2] = "ac_cv_path_IP_PATH=/sbin/ip,ac_cv_path_IP_PATH=,iproute2,iproute2"
-PACKAGECONFIG[numactl] = "--with-numactl,--without-numactl,numactl,"
-PACKAGECONFIG[fuse] = "--with-fuse,--without-fuse,fuse,"
-PACKAGECONFIG[audit] = "--with-audit,--without-audit,audit,"
-PACKAGECONFIG[libcap-ng] = "--with-capng,--without-capng,libcap-ng,"
-PACKAGECONFIG[wireshark] = "--with-wireshark-dissector,--without-wireshark-dissector,wireshark libwsutil,"
-PACKAGECONFIG[apparmor-profiles] = "--with-apparmor-profiles, --without-apparmor-profiles,"
-PACKAGECONFIG[firewalld] = "--with-firewalld, --without-firewalld,"
-PACKAGECONFIG[libpcap] = "--with-libpcap, --without-libpcap,libpcap,libpcap"
-PACKAGECONFIG[numad] = "--with-numad, --without-numad,"
+PACKAGECONFIG[sasl] = "-Dsasl=enabled,-Dsasl=disabled,cyrus-sasl,cyrus-sasl"
+PACKAGECONFIG[numactl] = "-Dnumactl=enabled,-Dnumactl=disabled,numactl,"
+PACKAGECONFIG[fuse] = "-Dfuse=enabled,-Dfuse=disabled,fuse,"
+PACKAGECONFIG[audit] = "-Daudit=enabled,-Daudit=disabled,audit,"
+PACKAGECONFIG[libcap-ng] = "-Dcapng=enabled,-Dcapng=disabled,libcap-ng,"
+PACKAGECONFIG[wireshark] = "-Dwireshark_dissector=enabled,-Dwireshark_dissector=disabled,wireshark libwsutil,"
+PACKAGECONFIG[apparmor_profiles] = "-Dapparmor_profiles=true, -Dapparmor_profiles=false,"
+PACKAGECONFIG[firewalld] = "-Dfirewalld=enabled, -Dfirewalld=disabled,"
+PACKAGECONFIG[libpcap] = "-Dlibpcap=enabled, -Dlibpcap=disabled,libpcap,libpcap"
+PACKAGECONFIG[numad] = "-Dnumad=enabled, -Dnumad=disabled,"

# Enable the Python tool support
require libvirt-python.inc
@@ -255,7 +198,7 @@ do_compile() {

cd ${B}
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:${B}/src:"
- oe_runmake all
+ ninja all
}

do_install_prepend() {
@@ -278,6 +221,8 @@ do_install_append() {
fi

if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+ mkdir -p ${D}/lib
+ mv ${D}/usr/lib/systemd ${D}/lib
# This variable is used by libvirtd.service to start libvirtd in the right mode
sed -i '/#LIBVIRTD_ARGS="--listen"/a LIBVIRTD_ARGS="--listen --daemon"' ${D}/${sysconfdir}/sysconfig/libvirtd

@@ -360,7 +305,7 @@ do_install_append() {
# connection via 127.0.0.1 is available out of box.
install -d ${D}/etc/pki/CA
install -d ${D}/etc/pki/libvirt/private
- install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
+ install -m 0755 ${WORKDIR}/gnutls-helper.py ${D}/${bindir}
install -m 0644 ${WORKDIR}/cakey.pem ${D}/${sysconfdir}/pki/libvirt/private/cakey.pem
install -m 0644 ${WORKDIR}/cacert.pem ${D}/${sysconfdir}/pki/CA/cacert.pem
install -m 0644 ${WORKDIR}/serverkey.pem ${D}/${sysconfdir}/pki/libvirt/private/serverkey.pem
@@ -376,10 +321,10 @@ do_install_append() {
chmod 4755 ${D}${bindir}/virt-login-shell
}

-EXTRA_OECONF += " \
- --with-init-script=systemd \
- --with-test-suite \
- --with-runstatedir=/run \
+EXTRA_OEMESON += " \
+ -Dinit_script=systemd \
+ -Drunstatedir=/run \
+ -Dtests=enabled \
"

# gcc9 end up mis-compiling qemuxml2argvtest.o with Og which then
@@ -392,11 +337,11 @@ EXTRA_OEMAKE = "BUILD_DIR=${B} DEST_DIR=${D}${PTEST_PATH} PTEST_DIR=${PTEST_PATH
PRIVATE_LIBS_${PN}-ptest_append = "libvirt-admin.so.0"

do_compile_ptest() {
- oe_runmake -C tests buildtest-TESTS
+ ninja -C tests buildtest-TESTS
}

do_install_ptest() {
- oe_runmake -C tests install-ptest
+ ninja -C tests install-ptest

find ${S}/tests -maxdepth 1 -type d -exec cp -r {} ${D}${PTEST_PATH}/tests/ \;

--
2.27.0


1061 - 1080 of 7394