<snip> I don't think this is needed any more - this hasn't been used for quite a while. IIRC, this was used to bundle DTB+DTBOs into a mini FIT image in the early DT Overlay days...

Thanks for doing this and big thanks for the rebase! Reviewed-by: Denys Dmytriyenko <denys@...>

Thank you for taking care of this. And don't worry about Fixes: tag - meta-ti doesn't have a strict policy for it. I haven't tested it yet, but so far looks good to me: Acked-by: Denys Dmytriyenko <de

This would be a major change globally across the layer in dunfell, akin to a new feature. It would require re-testing everything all over again. Also, it would provide very little benefit, since there

It simply won't apply to kirkstone at all - this looks like dunfell-specific patch and kirkstone was mentioned by mistake.

Ah, nice catch! I guess I've had too many rebases... :) Thanks for very careful reviewing! The issue is that kirkstone and master have diverged from dunfell too much now and porting changes became hea

Sorry for the flood and please ignore the earlier incomplete sets - I hit a posting limit on the list and some patches may have not been delivered. Kirkstone and master are 2 separate sets due to opte

From: Bryan Brattlof <bb@...> update the SHA of k3conf to pickup am62ax support Signed-off-by: Bryan Brattlof <bb@...> Reviewed-by: Praneeth Bajjuri <praneeth@...> Signed-off-by: Ryan Eatmon

From: Judith Mendez <jm@...> Upgrade arm-trusted-firmare to v2.8-226-g2fcd408bb. This upgrade picks up K3 L2 cache, snoop delayed, and EA handling updates from upstream master. Do not update to tip

From: Devarsh Thakkar <devarsht@...> Update library to 0.5.2 as it adds support for AM62A SoC. Co-Authored-By: Sai Sree Kartheek Adivi <s-adivi@...> Signed-off-by: Devarsh Thakkar <devarsht@...

From: Manorit Chawdhry <m-chawdhry@...> optee-os is already at 3.20 tag but the others were still outdated. Updates other optee components to 3.19 tag Signed-off-by: Manorit Chawdhry <m-chawdhry@ti

From: Sinthu Raja <sinthu.raja@...> The AM68 SK has PWM output pins connected to its RPi headers. Add overlay file to enable PWM pins. Signed-off-by: Sinthu Raja <sinthu.raja@...> Signed-off-by:

From: Vaishnav Achath <vaishnav.a@...> Add the following overlay files on J721E EVM: 1. Fusion board (For FPDLink-III cameras) 2. IMX390 FPDLink camera module 3. IMX219 RPi-compatible camera module

From: Sinthu Raja <sinthu.raja@...> The extension for OV5640 overlay is incorrect. Therefore, update the correct extension to build the overlay with .dtbo Fixes: f67e9805 ("conf: machine: j721s2: A

From: Jai Luthra <j-luthra@...> IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM typ

From: Denys Dmytriyenko <denys@...> Doing multiple do_install:prepend overrides does not guarantee the order - it was observed that signing could fail as it was happening prior to symlinking

From: Denys Dmytriyenko <denys@...> Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@...> --- meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt_5.10.b

From: Denys Dmytriyenko <denys@...> Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@...> --- meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2021.01.bb

From: Denys Dmytriyenko <denys@...> Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@...> --- meta-ti-bsp/recipes-ti/secdev/ti-k3-secdev_git.bb | 2 +- 1

From: Denys Dmytriyenko <denys@...> Match the latest sha used in Dunfell. Signed-off-by: Denys Dmytriyenko <denys@...> --- meta-ti-bsp/recipes-bsp/ti-linux-fw/ti-linux-fw.inc | 4 ++-