These are the complete changes in the patch 1) Updated the firmware to fix IPC load issue due to resource_table placement 2) Added the INC_PR 3) Updated the RTOS version Signed-off-by: Yogesh

Yes, will make this r2 when merging to dunfell.

This should still be r2 right.. regards Suman

Tested on j721e-evm with updated IPC FW bins. Tested-by: Grygorii Strashko <grygorii.strashko@...> -- Best regards, grygorii

Changes for firmware update( eff643e5 ti-rtos-firmware: update the source to ti-linux-firmware) were in-complete without soft link. 1) Added soft link missing for the rtos firmware. 2) Updated the IPC

Changes for firmware update( eff643e5 ti-rtos-firmware: update the source to ti-linux-firmware) were in-complete without soft link. 1) Added soft link missing for the rtos firmware. 2) Updated the IPC

Yes, this is temporary work-around for 8.0.We plan to clean this for 8.1. The name used are as per the IPC tests in LTP-DDT. Will fix in V2. Yes, missed it. Will fix in v2.

Hi Yogesh, I am guessing you will be moving away from overloading this recipe for next release, and will do this cleanly. Hmm, I am actually not sure if these are actually baremetal firmwares.

Changes for firmware update( eff643e5 ti-rtos-firmware: update the source to ti-linux-firmware) were in-complete without soft link. 1) Added soft link missing for the rtos firmware. 2) Updated the IPC

Changes to fix the release version for 08.00.00.003 Yogesh Siraswar (4): u-boot-ti-staging: Update the u-boot srcrev to 08.00.00.003 linux-ti-staging: Update the linux srcrev to 08.00.00.003

Updated the linux-rt to pick 08.00.00.003 tag Signed-off-by: Yogesh Siraswar <yogeshs@...> --- recipes-kernel/linux/linux-ti-staging-rt_5.10.bb | 2 +- 1 file changed, 1 insertion(+), 1

Update ti-linux-firmware to pick 08.00.00.003 Signed-off-by: Yogesh Siraswar <yogeshs@...> --- recipes-bsp/ti-sci-fw/ti-sci-fw.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff

Update the u-boot to pick tag 08.00.00.003 Signed-off-by: Yogesh Siraswar <yogeshs@...> --- recipes-bsp/u-boot/u-boot-ti-staging_2021.01.bb | 4 ++-- 1 file changed, 2 insertions(+), 2

Updated the linux branch to pick 08.00.00.003 tag Signed-off-by: Yogesh Siraswar <yogeshs@...> --- recipes-kernel/linux/linux-ti-staging_5.10.bb | 2 +- 1 file changed, 1 insertion(+), 1

This is temporary change to pick the 08.00.00.026 firmware from ti-linux-firmware repos: 1) Using the ti-sci-fw to pick the latest firmware and support AUTOREV in future 2) Kept the destination folder

The SRCREV for the ti-sci-fw.inc will be updated to head after tagging. Need to fix the PV to override from the ti-sci-fw. Will submit new patch revision. TODO: Will need to split ti-eth and ti-ipc

From: Vignesh Raghavedra <vigneshr@...> Update AM65x SR2.0 prueth firmware to 02.02.09.03 that adds support for 100M HD mode. Signed-off-by: Vignesh Raghavendra <vigneshr@...> ---

ti-eth is @ 08.00.00.029 -> how is that taken care of? I thought we did not do AUTOREV on master branch in order for builds to be reproducible? Regards Vignesh

This is temporary change to pick the 08.00.00.026 firmware from ti-linux-firmware repos: 1) Using the ti-sci-fw to pick the latest firmware and support AUTOREV 2) Kept the destination folder name same

From: Denys Dmytriyenko <denys@...> There was a discrepancy between master and dunfell where 2 different versions of the same patch existed, so when syncing branches, it resulted in