Date   

Re: [dunfell][PATCH 00/11] Adding support for am62xx

Nishanth Menon
 

On 11:25-20220322, Ryan Eatmon via lists.yoctoproject.org wrote:
These patches add initial recipe support for am62xx.

Hari Nagalla (3):
ti-rtos: Add support for AM62x M4F
ti-rtos: Fix AM62x R5F DM FW paths
ti-rtos: Fix AM62x Fix MCU core numbers

Krunal Bhargav (1):
ti-graphics: Add AM62x GPU (AXE1-16M) support v4

Nikhil Devshatwar (3):
recipes-bsp: lpm-demo: Introduce low power mode demo package
recipes-bsp: tifs-lpm-stub: Introduce new recipe
recipes-bsp: lpm-demo: Fix build errors with clean task

Nishanth Menon (4):
machine: Add am62xx evm configuration
recipes-ti: ti-rtos-bin: Add AM62x binaries
recipes: Pick up correct image and build DM to boot images
HACK: recipes-ti: ti-rtos-metadata: Make am62x point to am64x

conf/machine/am62xx-evm-k3r5.conf | 11 +
conf/machine/am62xx-evm.conf | 15 +
conf/machine/include/am62xx.inc | 17 +
recipes-bsp/lpm-demo/files/GPL-2 | 340 ++++++++++++++++++
recipes-bsp/lpm-demo/lpm-demo_1.0.bb | 30 ++
.../ti-img-rogue-driver_1.13.5776728.bb | 40 ---
.../ti-img-rogue-driver_1.15.6133109.bb | 42 +++
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 18 +
.../tifs-lpm-stub/tifs-lpm-stub_git.bb | 22 ++
recipes-bsp/u-boot/u-boot-ti.inc | 7 +
...bb => ti-img-rogue-umlibs_1.15.6133109.bb} | 17 +-
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 37 ++
recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb | 1 +
13 files changed, 549 insertions(+), 48 deletions(-)
create mode 100644 conf/machine/am62xx-evm-k3r5.conf
create mode 100644 conf/machine/am62xx-evm.conf
create mode 100644 conf/machine/include/am62xx.inc
create mode 100644 recipes-bsp/lpm-demo/files/GPL-2
create mode 100644 recipes-bsp/lpm-demo/lpm-demo_1.0.bb
delete mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
create mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
create mode 100644 recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb
rename recipes-graphics/libgles/{ti-img-rogue-umlibs_1.13.5776728.bb => ti-img-rogue-umlibs_1.15.6133109.bb} (77%)

NAK to the series.

a) patches need to be cleaned up - squashed etc.
b) lpm-demo binary should probably belong to meta-arago instead
of meta-ti. meta-ti should be a bsp layer, not a distro.


--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D


Re: [dunfell][PATCH 04/11] HACK: recipes-ti: ti-rtos-metadata: Make am62x point to am64x

Nishanth Menon
 

On 11:25-20220322, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nishanth Menon <nm@...>

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb | 1 +
1 file changed, 1 insertion(+)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb b/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
index e435676f..4f320e4c 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
@@ -14,6 +14,7 @@ PLAT_SFX_j7 = "/j721e"
PLAT_SFX_j7200-evm = "/j7200"
PLAT_SFX_am65xx = "/am65xx"
PLAT_SFX_am64xx = "/am64x"
+PLAT_SFX_am62xx = "/am64x"

NAK -> I know I authored these initial patches during silicon bringup,
but please do squash and cleanup the patches prior to posting
upstream.

--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D


[dunfell][PATCH] ti-graphics: gpu enable and move all platforms to ddk 1.15

Etheridge, Darren
 

Enable the GPU for am62xx and j721s2 and use IMG DDK 1.15

Migrate Imagination DDK 1.13 to DDK 1.15 for J721e

Signed-off-by: Darren Etheridge <detheridge@...>
---
conf/machine/am62xx-evm.conf | 2 +
conf/machine/j721s2-evm.conf | 2 +
.../ti-img-rogue-driver_1.13.5776728.bb | 40 -----------------
.../ti-img-rogue-driver_1.15.6133109.bb | 44 +++++++++++++++++++
...bb => ti-img-rogue-umlibs_1.15.6133109.bb} | 13 +++---
5 files changed, 55 insertions(+), 46 deletions(-)
delete mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
create mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
rename recipes-graphics/libgles/{ti-img-rogue-umlibs_1.13.5776728.bb => ti-img-rogue-umlibs_1.15.6133109.bb} (84%)

diff --git a/conf/machine/am62xx-evm.conf b/conf/machine/am62xx-evm.conf
index 600abb58..086e40e4 100644
--- a/conf/machine/am62xx-evm.conf
+++ b/conf/machine/am62xx-evm.conf
@@ -4,6 +4,8 @@

require conf/machine/include/am62xx.inc

+MACHINE_FEATURES += "gpu"
+
KERNEL_DEVICETREE = " \
ti/k3-am625-sk.dtb \
ti/k3-am625-sk-lpmdemo.dtb \
diff --git a/conf/machine/j721s2-evm.conf b/conf/machine/j721s2-evm.conf
index 82fd33da..e5ed0b73 100644
--- a/conf/machine/j721s2-evm.conf
+++ b/conf/machine/j721s2-evm.conf
@@ -4,6 +4,8 @@

require conf/machine/include/j7.inc

+MACHINE_FEATURES += "gpu"
+
SERIAL_CONSOLES = "115200;ttyS10"
SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
TFA_K3_USART = "0x8"
diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
deleted file mode 100644
index a05de0f2..00000000
--- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
+++ /dev/null
@@ -1,40 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR Rogue GPU found in the TI SoCs"
-HOMEPAGE = "http://git.ti.com/graphics/ti-img-rogue-driver"
-LICENSE = "MIT | GPLv2"
-LIC_FILES_CHKSUM = "file://README;beginline=14;endline=19;md5=0403c7dea01a2b8232261e805325fac2"
-
-inherit module features_check
-
-REQUIRED_MACHINE_FEATURES = "gpu"
-
-MACHINE_KERNEL_PR_append = "b"
-PR = "${MACHINE_KERNEL_PR}"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7"
-
-DEPENDS = "virtual/kernel"
-
-PROVIDES = "virtual/gpudriver"
-
-BRANCH = "1.13-5776728/linux-k5.10"
-
-SRC_URI = " \
- git://git.ti.com/graphics/ti-img-rogue-driver.git;branch=${BRANCH} \
- file://0001-compiler-support-OpenEmbedded-nodistro-internal-aarc.patch \
-"
-
-S = "${WORKDIR}/git"
-
-SRCREV = "35a25875ae8738f82c7cabc6b077ef992b0cca84"
-
-PVR_SOC = "j721e_linux"
-PVR_BVNC = "22.104.208.318"
-PVR_BUILD = "release"
-PVR_WS = "wayland"
-
-EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}" RGX_BVNC=${PVR_BVNC} BUILD=${PVR_BUILD} PVR_BUILD_DIR=${PVR_SOC} WINDOW_SYSTEM=${PVR_WS}'
-
-do_install() {
- make -C ${STAGING_KERNEL_DIR} M=${B}/binary_${PVR_SOC}_${PVR_WS}_${PVR_BUILD}/target_aarch64/kbuild INSTALL_MOD_PATH=${D}${root_prefix} PREFIX=${STAGING_DIR_HOST} modules_install
-}
diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
new file mode 100644
index 00000000..fbff6c51
--- /dev/null
+++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
@@ -0,0 +1,44 @@
+DESCRIPTION = "Kernel drivers for the PowerVR Rogue GPU found in the TI SoCs"
+HOMEPAGE = "http://git.ti.com/graphics/ti-img-rogue-driver"
+LICENSE = "MIT | GPLv2"
+LIC_FILES_CHKSUM = "file://README;beginline=14;endline=19;md5=0403c7dea01a2b8232261e805325fac2"
+
+inherit module features_check
+
+REQUIRED_MACHINE_FEATURES = "gpu"
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "j7-evm|j721s2-evm|am62xx"
+
+DEPENDS = "virtual/kernel"
+
+PROVIDES = "virtual/gpudriver"
+
+BRANCH = "linuxws/dunfell/k5.10/${PV}"
+
+SRC_URI = " \
+ git://git.ti.com/graphics/ti-img-rogue-driver.git;branch=${BRANCH} \
+ file://0001-compiler-support-OpenEmbedded-nodistro-internal-aarc.patch \
+"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "ee0674adccac16f5b2f7cb8d5d05948706080cb5"
+
+TARGET_PRODUCT_j7-evm = "j721e_linux"
+TARGET_PRODUCT_j721s2-evm = "j721s2_linux"
+TARGET_PRODUCT_am62xx = "am62_linux"
+TARGET_BVNC_j7-evm = "22.104.208.318"
+TARGET_BVNC_j721s2-evm = "36.53.104.796"
+TARGET_BVNC_am62xx = "33.15.11.3"
+PVR_BUILD = "release"
+PVR_WS = "wayland"
+
+EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}" RGX_BVNC=${TARGET_BVNC} BUILD=${PVR_BUILD} PVR_BUILD_DIR=${TARGET_PRODUCT} WINDOW_SYSTEM=${PVR_WS}'
+
+do_install() {
+ make -C ${STAGING_KERNEL_DIR} M=${B}/binary_${TARGET_PRODUCT}_${PVR_WS}_${PVR_BUILD}/target_aarch64/kbuild INSTALL_MOD_PATH=${D}${root_prefix} PREFIX=${STAGING_DIR_HOST} modules_install
+}
diff --git a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
similarity index 84%
rename from recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb
rename to recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
index 5194015e..e00dce99 100644
--- a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb
+++ b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
@@ -8,17 +8,18 @@ inherit features_check
REQUIRED_MACHINE_FEATURES = "gpu"

PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7"
+COMPATIBLE_MACHINE = "j7-evm|j721s2-evm|am62xx"

-PR = "r3"
+PR = "r1"

BRANCH = "linuxws/dunfell/k5.10/${PV}"

SRC_URI = "git://git.ti.com/graphics/ti-img-rogue-umlibs.git;branch=${BRANCH}"
+SRCREV = "47c3ffc44f2881397d45c8a2b5dfa7d6c58b79fb"

-SRCREV = "5ef38353c38d921a65ea6df75c7b6ce710b66034"
-
-PVR_SOC ?= "j721e_linux"
+TARGET_PRODUCT_j7-evm = "j721e_linux"
+TARGET_PRODUCT_j721s2-evm = "j721s2_linux"
+TARGET_PRODUCT_am62xx = "am62_linux"
PVR_BUILD ?= "release"
PVR_WS = "wayland"

@@ -50,7 +51,7 @@ RRECOMMENDS_${PN} += "ti-img-rogue-driver"
S = "${WORKDIR}/git"

do_install () {
- oe_runmake install DESTDIR=${D} TARGET_PRODUCT=${PVR_SOC} BUILD=${PVR_BUILD} WINDOW_SYSTEM=${PVR_WS}
+ oe_runmake install DESTDIR=${D} TARGET_PRODUCT=${TARGET_PRODUCT} BUILD=${PVR_BUILD} WINDOW_SYSTEM=${PVR_WS}
chown -R root:root ${D}
}

--
2.17.1


Re: [dunfell][PATCH v2 3/7] recipes: Pick up correct image and build DM to boot images

Denys Dmytriyenko
 

On Tue, Mar 22, 2022 at 01:15:54PM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nishanth Menon <nm@...>

Make sure we have bootable wic images.
First of all, can this be squashed with the previous patch?


Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/u-boot/u-boot-ti.inc | 1 +
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/recipes-bsp/u-boot/u-boot-ti.inc b/recipes-bsp/u-boot/u-boot-ti.inc
index 6098f989..231b7647 100644
--- a/recipes-bsp/u-boot/u-boot-ti.inc
+++ b/recipes-bsp/u-boot/u-boot-ti.inc
@@ -41,6 +41,7 @@ PACKAGECONFIG[dm] = "DM=${STAGING_DIR_HOST}${nonarch_base_libdir}/firmware/pdk-i

PACKAGECONFIG_append_aarch64 = " atf optee"
PACKAGECONFIG_append_j7 = " dm"
+PACKAGECONFIG_append_am62xx = " dm"

COMPATIBLE_MACHINE = "(ti-soc)"

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index 431c13da..4cd08a36 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,7 +19,7 @@ PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
-PLAT_SFX_am62xx-evm = "am62xx"
+PLAT_SFX_am62xx-evm = "am62x"
am62xx SOC_FAMILY in the override?


FILESEXTRAPATHS_prepend := "${METATIBASE}/recipes-bsp/ti-sci-fw/files/:"
require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
--
2.17.1
--
Regards,
Denys Dmytriyenko <denis@...>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964


Re: [dunfell][PATCH v2 2/7] recipes-ti: ti-rtos-bin: Add AM62x binaries

Denys Dmytriyenko
 

On Tue, Mar 22, 2022 at 01:15:53PM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nishanth Menon <nm@...>

Add binaries for AM62x

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index c5852dbd..431c13da 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,6 +19,7 @@ PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
+PLAT_SFX_am62xx-evm = "am62xx"
Wny not use more generic am62xx SOC_FAMILY here, instead of specific "evm", to
be more generic and cover any future am62-derivatives?


FILESEXTRAPATHS_prepend := "${METATIBASE}/recipes-bsp/ti-sci-fw/files/:"
require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
@@ -154,6 +155,13 @@ do_install_am64xx() {
install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
}

+do_install_am62xx-evm() {
Same comment.


+ install -d ${LEGACY_IPC_FW_DIR}
+ # No specific firmware to install till M4F comes online
+ # DM Firmware
+ install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
+}
+
# Set up names for the firmwares
ALTERNATIVE_${PN}_am65xx = "\
am65x-mcu-r5f0_0-fw \
@@ -205,6 +213,10 @@ ALTERNATIVE_${PN}_j721s2-evm = "\
j721s2-c71_1-fw \
"

+ALTERNATIVE_${PN}_am62xx-evm = "\
And here


+ am62xx-main-r5f0_0-fw \
+ "
+
# Set up link names for the firmwares

TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
@@ -245,6 +257,8 @@ TARGET_MAIN_R5FSS1_1_j721s2-evm = "j721s2-main-r5f1_1-fw"
TARGET_C7X_0_j721s2-evm = "j721s2-c71_0-fw"
TARGET_C7X_1_j721s2-evm = "j721s2-c71_1-fw"

+TARGET_MAIN_R5FSS0_0_am62xx-evm = "am62xx-main-r5f0_0-fw"
One more


+
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"

@@ -278,6 +292,8 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET
ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw] = "${base_libdir}/firmware/${TARGET_C7X_0}"
ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw] = "${base_libdir}/firmware/${TARGET_C7X_1}"

+ALTERNATIVE_LINK_NAME[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
+
# Create the firmware alternatives

ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
@@ -313,6 +329,8 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc
ALTERNATIVE_TARGET[j721s2-c71_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
ALTERNATIVE_TARGET[j721s2-c71_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"

+ALTERNATIVE_TARGET[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
+
ALTERNATIVE_PRIORITY = "10"

# make sure that lib/firmware, and all its contents are part of the package
--
2.17.1
--
Regards,
Denys Dmytriyenko <denis@...>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964


Re: [dunfell][PATCH v2 1/7] machine: Add am62xx evm configuration

Denys Dmytriyenko
 

On Tue, Mar 22, 2022 at 01:15:52PM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nishanth Menon <nm@...>

Lets add the basic AM62xx-evm configuration.

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
conf/machine/am62xx-evm-k3r5.conf | 11 +++++++++++
conf/machine/am62xx-evm.conf | 13 +++++++++++++
conf/machine/include/am62xx.inc | 17 +++++++++++++++++
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 18 ++++++++++++++++++
recipes-bsp/u-boot/u-boot-ti.inc | 6 ++++++
5 files changed, 65 insertions(+)
create mode 100644 conf/machine/am62xx-evm-k3r5.conf
create mode 100644 conf/machine/am62xx-evm.conf
create mode 100644 conf/machine/include/am62xx.inc

diff --git a/conf/machine/am62xx-evm-k3r5.conf b/conf/machine/am62xx-evm-k3r5.conf
new file mode 100644
index 00000000..724a8d4a
--- /dev/null
+++ b/conf/machine/am62xx-evm-k3r5.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: AM62XX EVM (R5F)
+#@DESCRIPTION: Machine configuration for the TI AM62xx EVM (R5F core)
+
+require conf/machine/include/k3r5.inc
+
+SYSFW_SOC = "am62x"
+SYSFW_CONFIG = "evm"
+SYSFW_SUFFIX = "gp"
+
+UBOOT_MACHINE = "am62x_evm_r5_defconfig"
diff --git a/conf/machine/am62xx-evm.conf b/conf/machine/am62xx-evm.conf
new file mode 100644
index 00000000..600abb58
--- /dev/null
+++ b/conf/machine/am62xx-evm.conf
@@ -0,0 +1,13 @@
+#@TYPE: Machine
+#@NAME: AM62XX EVM
+#@DESCRIPTION: Machine configuration for the TI AM62XX EVM
+
+require conf/machine/include/am62xx.inc
+
+KERNEL_DEVICETREE = " \
+ ti/k3-am625-sk.dtb \
+ ti/k3-am625-sk-lpmdemo.dtb \
+ ti/k3-am625-minimal.dtb \
+"
+
+UBOOT_MACHINE = "am62x_evm_a53_defconfig"
diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc
new file mode 100644
index 00000000..06bac922
--- /dev/null
+++ b/conf/machine/include/am62xx.inc
@@ -0,0 +1,17 @@
+require conf/machine/include/k3.inc
+SOC_FAMILY_append = ":am62xx"
+
+MACHINE_FEATURES += "screen touchscreen"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+# AM64 supports multi-certificate images, use the same
Typo in the comment?


+IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
+
+do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+
+TFA_BOARD = "lite"
+OPTEEMACHINE = "k3-am65x"
Is it still correct? Are there specific am64 and am62 machine names in
optee-os?


+OPTEEOUTPUTMACHINE = "k3"
diff --git a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
index 646833a7..099473b4 100644
--- a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
+++ b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
@@ -6,6 +6,7 @@ DEPENDS_append_j7200-hs-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_j721s2-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_am64xx-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_am64xx-hs-evm-k3r5 = " virtual/bootloader"
+DEPENDS_append_am62xx-evm-k3r5 = " virtual/bootloader"

CLEANBROKEN = "1"
PR = "${INC_PR}.2"
@@ -29,6 +30,7 @@ SYSFW_PREFIX_j7-hs-evm-k3r5-sr1-1 = "ti-fs-firmware"
SYSFW_PREFIX_j7200-evm-k3r5 = "ti-fs-firmware"
SYSFW_PREFIX_j7200-hs-evm-k3r5 = "ti-fs-firmware"
SYSFW_PREFIX_j721s2-evm-k3r5 = "ti-fs-firmware"
+SYSFW_PREFIX_am62xx-evm-k3r5 = "ti-fs-firmware"

SYSFW_SUFFIX ?= "unknown"

@@ -63,6 +65,7 @@ EXTRA_OEMAKE_append_j7200-hs-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-s
EXTRA_OEMAKE_append_j721s2-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
EXTRA_OEMAKE_append_am64xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
EXTRA_OEMAKE_append_am64xx-hs-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
+EXTRA_OEMAKE_append_am62xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""

do_compile() {
cd ${WORKDIR}/imggen/
@@ -170,4 +173,19 @@ do_deploy_am64xx-hs-evm-k3r5() {
install -m 644 ${SYSFW_TISCI} ${DEPLOYDIR}/
}

+do_install_am62xx-evm-k3r5() {
+ install -d ${D}/boot
+ install -m 644 ${WORKDIR}/imggen/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
+ ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_SYMLINK}
+ ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
+}
+
+do_deploy_am62xx-evm-k3r5() {
+ install -d ${DEPLOYDIR}
+ install -m 644 ${WORKDIR}/imggen/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
+ ln -sf ${UBOOT_IMAGE} ${DEPLOYDIR}/${UBOOT_SYMLINK}
+ ln -sf ${UBOOT_IMAGE} ${DEPLOYDIR}/${UBOOT_BINARY}
+ install -m 644 ${SYSFW_TISCI} ${DEPLOYDIR}/
+}
+
addtask deploy before do_build after do_compile
diff --git a/recipes-bsp/u-boot/u-boot-ti.inc b/recipes-bsp/u-boot/u-boot-ti.inc
index 7ed6c5b4..6098f989 100644
--- a/recipes-bsp/u-boot/u-boot-ti.inc
+++ b/recipes-bsp/u-boot/u-boot-ti.inc
@@ -69,6 +69,7 @@ SPL_UART_BINARY_j7200-hs-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_j721s2-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_am64xx-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_am64xx-hs-evm-k3r5 = "u-boot-spl.bin"
+SPL_UART_BINARY_am62xx-evm-k3r5 = "u-boot-spl.bin"

SPL_UART_IMAGE ?= "${SPL_UART_BINARY}-${MACHINE}-${PV}-${PR}"
SPL_UART_SYMLINK ?= "${SPL_UART_BINARY}-${MACHINE}"
@@ -419,4 +420,9 @@ do_deploy_append_am64xx-hs-evm-k3r5 () {
mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true
}

+do_deploy_append_am62xx-evm-k3r5 () {
+ mv ${DEPLOYDIR}/tiboot3.bin ${DEPLOYDIR}/tiboot3-r5spl.bin || true
+ mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true
+}
+
TOOLCHAIN = "gcc"
--
2.17.1
--
Regards,
Denys Dmytriyenko <denis@...>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964


[dunfell][PATCH v2 6/7] ti-rtos: Fix AM62x R5F DM FW paths

Ryan Eatmon
 

From: Hari Nagalla <hnagalla@...>

Signed-off-by: Hari Nagalla <hnagalla@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index 43119f03..ecf54123 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -165,6 +165,8 @@ do_install_am64xx() {
do_install_am62xx() {
install -d ${LEGACY_IPC_FW_DIR}
install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ # DM Firmware
+ install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
}

# Set up names for the firmwares
@@ -182,6 +184,7 @@ ALTERNATIVE_${PN}_am64xx = "\
"
ALTERNATIVE_${PN}_am62xx = "\
am62-mcu-m4f0_0-fw \
+ am62xx-main-r5f0_0-fw \
"

ALTERNATIVE_${PN}_j7 = "\
@@ -236,6 +239,7 @@ TARGET_MAIN_R5FSS1_0_am64xx = "am64-main-r5f1_0-fw"
TARGET_MAIN_R5FSS1_1_am64xx = "am64-main-r5f1_1-fw"
TARGET_MCU_M4FSS0_0_am64xx = "am64-mcu-m4f0_0-fw"
TARGET_MCU_M4FSS0_0_am62xx = "am62-mcu-m4f0_0-fw"
+TARGET_MAIN_R5FSS0_0_am62xx = "am62xx-main-r5f0_0-fw"

TARGET_MCU_R5FSS0_0_j7 = "j7-mcu-r5f0_0-fw"
TARGET_MCU_R5FSS0_1_j7 = "j7-mcu-r5f0_1-fw"
@@ -278,6 +282,7 @@ ALTERNATIVE_LINK_NAME[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET_M
ALTERNATIVE_LINK_NAME[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_M4FSS0_0}"

ALTERNATIVE_LINK_NAME[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_M4FSS0_0}"
+ALTERNATIVE_LINK_NAME[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"

ALTERNATIVE_LINK_NAME[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[j7-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
@@ -317,6 +322,7 @@ ALTERNATIVE_TARGET[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_e
ALTERNATIVE_TARGET[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f"

ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"

ALTERNATIVE_TARGET[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
ALTERNATIVE_TARGET[j7-mcu-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
--
2.17.1


[dunfell][PATCH v2 4/7] HACK: recipes-ti: ti-rtos-metadata: Make am62x point to am64x

Ryan Eatmon
 

From: Nishanth Menon <nm@...>

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb | 1 +
1 file changed, 1 insertion(+)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb b/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
index e435676f..4f320e4c 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb
@@ -14,6 +14,7 @@ PLAT_SFX_j7 = "/j721e"
PLAT_SFX_j7200-evm = "/j7200"
PLAT_SFX_am65xx = "/am65xx"
PLAT_SFX_am64xx = "/am64x"
+PLAT_SFX_am62xx = "/am64x"

# Use weak assignment to set defaults to TI_RTOS_METADATA_* variables
TI_RTOS_METADATA_URI ?= "git://git.ti.com/processor-sdk/coresdk_rtos_releases.git"
--
2.17.1


[dunfell][PATCH v2 7/7] ti-rtos: Fix AM62x Fix MCU core numbers

Ryan Eatmon
 

From: Hari Nagalla <hnagalla@...>

Signed-off-by: Hari Nagalla <hnagalla@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index ecf54123..fd2b08ae 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -81,7 +81,7 @@ do_install_prepend_am64xx() {
# Update the am62xx ipc binaries to be consistent with other platforms
do_install_prepend_am62xx() {
( cd ${RTOS_IPC_FW_DIR}; \
- mv am62-mcu-m4f0_0-fw ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f; \
+ mv am62-mcu-m4f0_0-fw ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f; \
)
}

@@ -164,7 +164,7 @@ do_install_am64xx() {

do_install_am62xx() {
install -d ${LEGACY_IPC_FW_DIR}
- install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
# DM Firmware
install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
}
@@ -321,7 +321,7 @@ ALTERNATIVE_TARGET[am64-main-r5f1_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_e
ALTERNATIVE_TARGET[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu2_1_release_strip.xer5f"
ALTERNATIVE_TARGET[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f"

-ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f"
ALTERNATIVE_TARGET[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"

ALTERNATIVE_TARGET[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
--
2.17.1


[dunfell][PATCH v2 5/7] ti-rtos: Add support for AM62x M4F

Ryan Eatmon
 

From: Hari Nagalla <hnagalla@...>

Add M4F FW support for AM62x SoC.

Signed-off-by: Hari Nagalla <hnagalla@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 23 +++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index 4cd08a36..43119f03 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,7 +19,7 @@ PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
-PLAT_SFX_am62xx-evm = "am62x"
+PLAT_SFX_am62xx = "am62xx"

FILESEXTRAPATHS_prepend := "${METATIBASE}/recipes-bsp/ti-sci-fw/files/:"
require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
@@ -78,6 +78,13 @@ do_install_prepend_am64xx() {
)
}

+# Update the am62xx ipc binaries to be consistent with other platforms
+do_install_prepend_am62xx() {
+ ( cd ${RTOS_IPC_FW_DIR}; \
+ mv am62-mcu-m4f0_0-fw ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f; \
+ )
+}
+
#Install all R5 & DSP ipc echo test binaries in lib/firmware/pdk-ipc, with softlinks up a level
do_install() {

@@ -155,11 +162,9 @@ do_install_am64xx() {
install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
}

-do_install_am62xx-evm() {
+do_install_am62xx() {
install -d ${LEGACY_IPC_FW_DIR}
- # No specific firmware to install till M4F comes online
- # DM Firmware
- install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
}

# Set up names for the firmwares
@@ -175,6 +180,9 @@ ALTERNATIVE_${PN}_am64xx = "\
am64-main-r5f1_1-fw \
am64-mcu-m4f0_0-fw \
"
+ALTERNATIVE_${PN}_am62xx = "\
+ am62-mcu-m4f0_0-fw \
+ "

ALTERNATIVE_${PN}_j7 = "\
j7-mcu-r5f0_0-fw \
@@ -227,6 +235,7 @@ TARGET_MAIN_R5FSS0_1_am64xx = "am64-main-r5f0_1-fw"
TARGET_MAIN_R5FSS1_0_am64xx = "am64-main-r5f1_0-fw"
TARGET_MAIN_R5FSS1_1_am64xx = "am64-main-r5f1_1-fw"
TARGET_MCU_M4FSS0_0_am64xx = "am64-mcu-m4f0_0-fw"
+TARGET_MCU_M4FSS0_0_am62xx = "am62-mcu-m4f0_0-fw"

TARGET_MCU_R5FSS0_0_j7 = "j7-mcu-r5f0_0-fw"
TARGET_MCU_R5FSS0_1_j7 = "j7-mcu-r5f0_1-fw"
@@ -268,6 +277,8 @@ ALTERNATIVE_LINK_NAME[am64-main-r5f1_0-fw] = "${base_libdir}/firmware/${TARGET_M
ALTERNATIVE_LINK_NAME[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
ALTERNATIVE_LINK_NAME[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_M4FSS0_0}"

+ALTERNATIVE_LINK_NAME[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_M4FSS0_0}"
+
ALTERNATIVE_LINK_NAME[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[j7-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
ALTERNATIVE_LINK_NAME[j7-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
@@ -305,6 +316,8 @@ ALTERNATIVE_TARGET[am64-main-r5f1_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_e
ALTERNATIVE_TARGET[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu2_1_release_strip.xer5f"
ALTERNATIVE_TARGET[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f"

+ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f"
+
ALTERNATIVE_TARGET[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
ALTERNATIVE_TARGET[j7-mcu-r5f0_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
ALTERNATIVE_TARGET[j7-main-r5f0_0-fw] = "${base_libdir}/firmware/ethfw/app_remoteswitchcfg_server_strip.xer5f"
--
2.17.1


[dunfell][PATCH v2 2/7] recipes-ti: ti-rtos-bin: Add AM62x binaries

Ryan Eatmon
 

From: Nishanth Menon <nm@...>

Add binaries for AM62x

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index c5852dbd..431c13da 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,6 +19,7 @@ PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
+PLAT_SFX_am62xx-evm = "am62xx"

FILESEXTRAPATHS_prepend := "${METATIBASE}/recipes-bsp/ti-sci-fw/files/:"
require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
@@ -154,6 +155,13 @@ do_install_am64xx() {
install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
}

+do_install_am62xx-evm() {
+ install -d ${LEGACY_IPC_FW_DIR}
+ # No specific firmware to install till M4F comes online
+ # DM Firmware
+ install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
+}
+
# Set up names for the firmwares
ALTERNATIVE_${PN}_am65xx = "\
am65x-mcu-r5f0_0-fw \
@@ -205,6 +213,10 @@ ALTERNATIVE_${PN}_j721s2-evm = "\
j721s2-c71_1-fw \
"

+ALTERNATIVE_${PN}_am62xx-evm = "\
+ am62xx-main-r5f0_0-fw \
+ "
+
# Set up link names for the firmwares

TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
@@ -245,6 +257,8 @@ TARGET_MAIN_R5FSS1_1_j721s2-evm = "j721s2-main-r5f1_1-fw"
TARGET_C7X_0_j721s2-evm = "j721s2-c71_0-fw"
TARGET_C7X_1_j721s2-evm = "j721s2-c71_1-fw"

+TARGET_MAIN_R5FSS0_0_am62xx-evm = "am62xx-main-r5f0_0-fw"
+
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] = "${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"

@@ -278,6 +292,8 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw] = "${base_libdir}/firmware/${TARGET
ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw] = "${base_libdir}/firmware/${TARGET_C7X_0}"
ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw] = "${base_libdir}/firmware/${TARGET_C7X_1}"

+ALTERNATIVE_LINK_NAME[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
+
# Create the firmware alternatives

ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
@@ -313,6 +329,8 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc
ALTERNATIVE_TARGET[j721s2-c71_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
ALTERNATIVE_TARGET[j721s2-c71_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"

+ALTERNATIVE_TARGET[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
+
ALTERNATIVE_PRIORITY = "10"

# make sure that lib/firmware, and all its contents are part of the package
--
2.17.1


[dunfell][PATCH v2 0/7] Adding support for am62xx

Ryan Eatmon
 

These patches add initial recipe support for am62xx.

--
v2: Removed ti-graphics patch, and removed lpm-demo patches.

Hari Nagalla (3):
ti-rtos: Add support for AM62x M4F
ti-rtos: Fix AM62x R5F DM FW paths
ti-rtos: Fix AM62x Fix MCU core numbers

Nishanth Menon (4):
machine: Add am62xx evm configuration
recipes-ti: ti-rtos-bin: Add AM62x binaries
recipes: Pick up correct image and build DM to boot images
HACK: recipes-ti: ti-rtos-metadata: Make am62x point to am64x

conf/machine/am62xx-evm-k3r5.conf | 11 +++++++
conf/machine/am62xx-evm.conf | 13 ++++++++
conf/machine/include/am62xx.inc | 17 ++++++++++
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 18 +++++++++++
recipes-bsp/u-boot/u-boot-ti.inc | 7 ++++
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 37 ++++++++++++++++++++++
recipes-ti/ti-rtos-bin/ti-rtos-metadata.bb | 1 +
7 files changed, 104 insertions(+)
create mode 100644 conf/machine/am62xx-evm-k3r5.conf
create mode 100644 conf/machine/am62xx-evm.conf
create mode 100644 conf/machine/include/am62xx.inc

--
2.17.1


[dunfell][PATCH v2 3/7] recipes: Pick up correct image and build DM to boot images

Ryan Eatmon
 

From: Nishanth Menon <nm@...>

Make sure we have bootable wic images.

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/u-boot/u-boot-ti.inc | 1 +
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/recipes-bsp/u-boot/u-boot-ti.inc b/recipes-bsp/u-boot/u-boot-ti.inc
index 6098f989..231b7647 100644
--- a/recipes-bsp/u-boot/u-boot-ti.inc
+++ b/recipes-bsp/u-boot/u-boot-ti.inc
@@ -41,6 +41,7 @@ PACKAGECONFIG[dm] = "DM=${STAGING_DIR_HOST}${nonarch_base_libdir}/firmware/pdk-i

PACKAGECONFIG_append_aarch64 = " atf optee"
PACKAGECONFIG_append_j7 = " dm"
+PACKAGECONFIG_append_am62xx = " dm"

COMPATIBLE_MACHINE = "(ti-soc)"

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index 431c13da..4cd08a36 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,7 +19,7 @@ PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
-PLAT_SFX_am62xx-evm = "am62xx"
+PLAT_SFX_am62xx-evm = "am62x"

FILESEXTRAPATHS_prepend := "${METATIBASE}/recipes-bsp/ti-sci-fw/files/:"
require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
--
2.17.1


[dunfell][PATCH v2 1/7] machine: Add am62xx evm configuration

Ryan Eatmon
 

From: Nishanth Menon <nm@...>

Lets add the basic AM62xx-evm configuration.

Signed-off-by: Nishanth Menon <nm@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
conf/machine/am62xx-evm-k3r5.conf | 11 +++++++++++
conf/machine/am62xx-evm.conf | 13 +++++++++++++
conf/machine/include/am62xx.inc | 17 +++++++++++++++++
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 18 ++++++++++++++++++
recipes-bsp/u-boot/u-boot-ti.inc | 6 ++++++
5 files changed, 65 insertions(+)
create mode 100644 conf/machine/am62xx-evm-k3r5.conf
create mode 100644 conf/machine/am62xx-evm.conf
create mode 100644 conf/machine/include/am62xx.inc

diff --git a/conf/machine/am62xx-evm-k3r5.conf b/conf/machine/am62xx-evm-k3r5.conf
new file mode 100644
index 00000000..724a8d4a
--- /dev/null
+++ b/conf/machine/am62xx-evm-k3r5.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: AM62XX EVM (R5F)
+#@DESCRIPTION: Machine configuration for the TI AM62xx EVM (R5F core)
+
+require conf/machine/include/k3r5.inc
+
+SYSFW_SOC = "am62x"
+SYSFW_CONFIG = "evm"
+SYSFW_SUFFIX = "gp"
+
+UBOOT_MACHINE = "am62x_evm_r5_defconfig"
diff --git a/conf/machine/am62xx-evm.conf b/conf/machine/am62xx-evm.conf
new file mode 100644
index 00000000..600abb58
--- /dev/null
+++ b/conf/machine/am62xx-evm.conf
@@ -0,0 +1,13 @@
+#@TYPE: Machine
+#@NAME: AM62XX EVM
+#@DESCRIPTION: Machine configuration for the TI AM62XX EVM
+
+require conf/machine/include/am62xx.inc
+
+KERNEL_DEVICETREE = " \
+ ti/k3-am625-sk.dtb \
+ ti/k3-am625-sk-lpmdemo.dtb \
+ ti/k3-am625-minimal.dtb \
+"
+
+UBOOT_MACHINE = "am62x_evm_a53_defconfig"
diff --git a/conf/machine/include/am62xx.inc b/conf/machine/include/am62xx.inc
new file mode 100644
index 00000000..06bac922
--- /dev/null
+++ b/conf/machine/include/am62xx.inc
@@ -0,0 +1,17 @@
+require conf/machine/include/k3.inc
+SOC_FAMILY_append = ":am62xx"
+
+MACHINE_FEATURES += "screen touchscreen"
+
+SERIAL_CONSOLES = "115200;ttyS2"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+# AM64 supports multi-certificate images, use the same
+IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
+
+do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+
+TFA_BOARD = "lite"
+OPTEEMACHINE = "k3-am65x"
+OPTEEOUTPUTMACHINE = "k3"
diff --git a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
index 646833a7..099473b4 100644
--- a/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
+++ b/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb
@@ -6,6 +6,7 @@ DEPENDS_append_j7200-hs-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_j721s2-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_am64xx-evm-k3r5 = " virtual/bootloader"
DEPENDS_append_am64xx-hs-evm-k3r5 = " virtual/bootloader"
+DEPENDS_append_am62xx-evm-k3r5 = " virtual/bootloader"

CLEANBROKEN = "1"
PR = "${INC_PR}.2"
@@ -29,6 +30,7 @@ SYSFW_PREFIX_j7-hs-evm-k3r5-sr1-1 = "ti-fs-firmware"
SYSFW_PREFIX_j7200-evm-k3r5 = "ti-fs-firmware"
SYSFW_PREFIX_j7200-hs-evm-k3r5 = "ti-fs-firmware"
SYSFW_PREFIX_j721s2-evm-k3r5 = "ti-fs-firmware"
+SYSFW_PREFIX_am62xx-evm-k3r5 = "ti-fs-firmware"

SYSFW_SUFFIX ?= "unknown"

@@ -63,6 +65,7 @@ EXTRA_OEMAKE_append_j7200-hs-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-s
EXTRA_OEMAKE_append_j721s2-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
EXTRA_OEMAKE_append_am64xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
EXTRA_OEMAKE_append_am64xx-hs-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""
+EXTRA_OEMAKE_append_am62xx-evm-k3r5 = " SBL="${STAGING_DIR_HOST}/boot/u-boot-spl.bin""

do_compile() {
cd ${WORKDIR}/imggen/
@@ -170,4 +173,19 @@ do_deploy_am64xx-hs-evm-k3r5() {
install -m 644 ${SYSFW_TISCI} ${DEPLOYDIR}/
}

+do_install_am62xx-evm-k3r5() {
+ install -d ${D}/boot
+ install -m 644 ${WORKDIR}/imggen/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
+ ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_SYMLINK}
+ ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
+}
+
+do_deploy_am62xx-evm-k3r5() {
+ install -d ${DEPLOYDIR}
+ install -m 644 ${WORKDIR}/imggen/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
+ ln -sf ${UBOOT_IMAGE} ${DEPLOYDIR}/${UBOOT_SYMLINK}
+ ln -sf ${UBOOT_IMAGE} ${DEPLOYDIR}/${UBOOT_BINARY}
+ install -m 644 ${SYSFW_TISCI} ${DEPLOYDIR}/
+}
+
addtask deploy before do_build after do_compile
diff --git a/recipes-bsp/u-boot/u-boot-ti.inc b/recipes-bsp/u-boot/u-boot-ti.inc
index 7ed6c5b4..6098f989 100644
--- a/recipes-bsp/u-boot/u-boot-ti.inc
+++ b/recipes-bsp/u-boot/u-boot-ti.inc
@@ -69,6 +69,7 @@ SPL_UART_BINARY_j7200-hs-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_j721s2-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_am64xx-evm-k3r5 = "u-boot-spl.bin"
SPL_UART_BINARY_am64xx-hs-evm-k3r5 = "u-boot-spl.bin"
+SPL_UART_BINARY_am62xx-evm-k3r5 = "u-boot-spl.bin"

SPL_UART_IMAGE ?= "${SPL_UART_BINARY}-${MACHINE}-${PV}-${PR}"
SPL_UART_SYMLINK ?= "${SPL_UART_BINARY}-${MACHINE}"
@@ -419,4 +420,9 @@ do_deploy_append_am64xx-hs-evm-k3r5 () {
mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true
}

+do_deploy_append_am62xx-evm-k3r5 () {
+ mv ${DEPLOYDIR}/tiboot3.bin ${DEPLOYDIR}/tiboot3-r5spl.bin || true
+ mv ${DEPLOYDIR}/u-boot-spl.bin ${DEPLOYDIR}/u-boot-spl-r5spl.bin || true
+}
+
TOOLCHAIN = "gcc"
--
2.17.1


Re: [dunfell][PATCH 06/11] recipes-bsp: lpm-demo: Introduce low power mode demo package

Ryan Eatmon
 

On 3/22/2022 12:59, Denys Dmytriyenko wrote:
On Tue, Mar 22, 2022 at 11:25:23AM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nikhil Devshatwar <nikhil.nd@...>

On am62xx-evm, for low power validation, the system boot using
an initramfs.

Package the tisdk-tiny-image.cpio file in the /boot of the
default filesystem to enable the demo.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/lpm-demo/files/GPL-2 | 340 +++++++++++++++++++++++++++
recipes-bsp/lpm-demo/lpm-demo_1.0.bb | 28 +++
2 files changed, 368 insertions(+)
create mode 100644 recipes-bsp/lpm-demo/files/GPL-2
create mode 100644 recipes-bsp/lpm-demo/lpm-demo_1.0.bb

diff --git a/recipes-bsp/lpm-demo/files/GPL-2 b/recipes-bsp/lpm-demo/files/GPL-2
new file mode 100644
index 00000000..d60c31a9
--- /dev/null
+++ b/recipes-bsp/lpm-demo/files/GPL-2
<snip>

diff --git a/recipes-bsp/lpm-demo/lpm-demo_1.0.bb b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
new file mode 100644
index 00000000..56b04d56
--- /dev/null
+++ b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
@@ -0,0 +1,28 @@
+SUMMARY = "Low power mode demo"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-2;md5=94d55d512a9ba36caa9b7df079bae19f"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "am62xx-evm"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+S = "${WORKDIR}"
+
+# We need to have the license file from some source. In this case, there
+# is no source. Hence pointing to the license file only
+SRC_URI = "file://GPL-2"
That's an incorrect way of doing it.
https://git.openembedded.org/openembedded-core/tree/meta/recipes-core/busybox/busybox-inittab_1.35.0.bb#n3
Also, default license for OpenEmbedded metadata is MIT, not GPLv2. Any
specific reason for the change?
https://git.yoctoproject.org/meta-arago/tree/meta-arago-distro/recipes-tisdk/tisdk-readme/tisdk-readme.bb#n3
Copying Nikhil, the original author to answer those questions.



+LPM_RAMFS_IMAGE ?= "tisdk-tiny-image"
+
+do_install() {
+ install -d ${D}/boot
+ if [ -f ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ]; then
+ install -m 0644 ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ${D}/boot
+ else
+ bberror "Could not find LPM ramfs image (${LPM_RAMFS_IMAGE}-${MACHINE}.cpio) in deploy dir!"
+ fi
+}
+
+do_install[depends] = "${LPM_RAMFS_IMAGE}:do_image_complete"
+
+FILES_${PN} = "/boot"
--
2.17.1
--
Ryan Eatmon
reatmon@...


Re: [dunfell][PATCH 06/11] recipes-bsp: lpm-demo: Introduce low power mode demo package

Denys Dmytriyenko
 

On Tue, Mar 22, 2022 at 11:25:23AM -0500, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Nikhil Devshatwar <nikhil.nd@...>

On am62xx-evm, for low power validation, the system boot using
an initramfs.

Package the tisdk-tiny-image.cpio file in the /boot of the
default filesystem to enable the demo.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/lpm-demo/files/GPL-2 | 340 +++++++++++++++++++++++++++
recipes-bsp/lpm-demo/lpm-demo_1.0.bb | 28 +++
2 files changed, 368 insertions(+)
create mode 100644 recipes-bsp/lpm-demo/files/GPL-2
create mode 100644 recipes-bsp/lpm-demo/lpm-demo_1.0.bb

diff --git a/recipes-bsp/lpm-demo/files/GPL-2 b/recipes-bsp/lpm-demo/files/GPL-2
new file mode 100644
index 00000000..d60c31a9
--- /dev/null
+++ b/recipes-bsp/lpm-demo/files/GPL-2
<snip>

diff --git a/recipes-bsp/lpm-demo/lpm-demo_1.0.bb b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
new file mode 100644
index 00000000..56b04d56
--- /dev/null
+++ b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
@@ -0,0 +1,28 @@
+SUMMARY = "Low power mode demo"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-2;md5=94d55d512a9ba36caa9b7df079bae19f"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "am62xx-evm"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+S = "${WORKDIR}"
+
+# We need to have the license file from some source. In this case, there
+# is no source. Hence pointing to the license file only
+SRC_URI = "file://GPL-2"
That's an incorrect way of doing it.
https://git.openembedded.org/openembedded-core/tree/meta/recipes-core/busybox/busybox-inittab_1.35.0.bb#n3

Also, default license for OpenEmbedded metadata is MIT, not GPLv2. Any
specific reason for the change?
https://git.yoctoproject.org/meta-arago/tree/meta-arago-distro/recipes-tisdk/tisdk-readme/tisdk-readme.bb#n3


+LPM_RAMFS_IMAGE ?= "tisdk-tiny-image"
+
+do_install() {
+ install -d ${D}/boot
+ if [ -f ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ]; then
+ install -m 0644 ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ${D}/boot
+ else
+ bberror "Could not find LPM ramfs image (${LPM_RAMFS_IMAGE}-${MACHINE}.cpio) in deploy dir!"
+ fi
+}
+
+do_install[depends] = "${LPM_RAMFS_IMAGE}:do_image_complete"
+
+FILES_${PN} = "/boot"
--
2.17.1
--
Regards,
Denys Dmytriyenko <denis@...>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964


Re: [dunfell][PATCH 05/11] ti-graphics: Add AM62x GPU (AXE1-16M) support v4

Etheridge, Darren
 

Ryan,

On 3/22/2022 11:25 AM, Ryan Eatmon via lists.yoctoproject.org wrote:
From: Krunal Bhargav <k-bhargav@...>
Signed-off-by: Krunal Bhargav <k-bhargav@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
conf/machine/am62xx-evm.conf | 2 +
.../ti-img-rogue-driver_1.13.5776728.bb | 40 ------------------
.../ti-img-rogue-driver_1.15.6133109.bb | 42 +++++++++++++++++++
...bb => ti-img-rogue-umlibs_1.15.6133109.bb} | 17 ++++----
4 files changed, 53 insertions(+), 48 deletions(-)
delete mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
create mode 100644 recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
rename recipes-graphics/libgles/{ti-img-rogue-umlibs_1.13.5776728.bb => ti-img-rogue-umlibs_1.15.6133109.bb} (77%)
This will break GPU on j721e, Drop this patch completely and I'll send a patch that will enable ddk 1.15 on all k3 platforms in a little while.


diff --git a/conf/machine/am62xx-evm.conf b/conf/machine/am62xx-evm.conf
index 600abb58..086e40e4 100644
--- a/conf/machine/am62xx-evm.conf
+++ b/conf/machine/am62xx-evm.conf
@@ -4,6 +4,8 @@
require conf/machine/include/am62xx.inc
+MACHINE_FEATURES += "gpu"
+
KERNEL_DEVICETREE = " \
ti/k3-am625-sk.dtb \
ti/k3-am625-sk-lpmdemo.dtb \
diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
deleted file mode 100644
index a05de0f2..00000000
--- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.13.5776728.bb
+++ /dev/null
@@ -1,40 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR Rogue GPU found in the TI SoCs"
-HOMEPAGE = "http://git.ti.com/graphics/ti-img-rogue-driver"
-LICENSE = "MIT | GPLv2"
-LIC_FILES_CHKSUM = "file://README;beginline=14;endline=19;md5=0403c7dea01a2b8232261e805325fac2"
-
-inherit module features_check
-
-REQUIRED_MACHINE_FEATURES = "gpu"
-
-MACHINE_KERNEL_PR_append = "b"
-PR = "${MACHINE_KERNEL_PR}"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7"
-
-DEPENDS = "virtual/kernel"
-
-PROVIDES = "virtual/gpudriver"
-
-BRANCH = "1.13-5776728/linux-k5.10"
-
-SRC_URI = " \
- git://git.ti.com/graphics/ti-img-rogue-driver.git;branch=${BRANCH} \
- file://0001-compiler-support-OpenEmbedded-nodistro-internal-aarc.patch \
-"
-
-S = "${WORKDIR}/git"
-
-SRCREV = "35a25875ae8738f82c7cabc6b077ef992b0cca84"
-
-PVR_SOC = "j721e_linux"
-PVR_BVNC = "22.104.208.318"
-PVR_BUILD = "release"
-PVR_WS = "wayland"
-
-EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}" RGX_BVNC=${PVR_BVNC} BUILD=${PVR_BUILD} PVR_BUILD_DIR=${PVR_SOC} WINDOW_SYSTEM=${PVR_WS}'
-
-do_install() {
- make -C ${STAGING_KERNEL_DIR} M=${B}/binary_${PVR_SOC}_${PVR_WS}_${PVR_BUILD}/target_aarch64/kbuild INSTALL_MOD_PATH=${D}${root_prefix} PREFIX=${STAGING_DIR_HOST} modules_install
-}
diff --git a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
new file mode 100644
index 00000000..0dfc50ec
--- /dev/null
+++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
@@ -0,0 +1,42 @@
+DESCRIPTION = "Kernel drivers for the PowerVR Rogue GPU found in the TI SoCs"
+HOMEPAGE = "https://bitbucket.itg.ti.com/scm/lcpd-priv-sdk/rogue_km"
+LICENSE = "MIT | GPLv2"
+LIC_FILES_CHKSUM = "file://README;beginline=14;endline=19;md5=0403c7dea01a2b8232261e805325fac2"
+
+inherit module features_check
+
+REQUIRED_MACHINE_FEATURES = "gpu"
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "j7|am62xx"
+
+DEPENDS = "virtual/kernel"
+
+PROVIDES = "virtual/gpudriver"
+
+BRANCH = "am62xx-wakeup"
+
+SRC_URI = " \
+ git://git@.../lcpd-priv-sdk/rogue_km.git;protocol=ssh;branch=${BRANCH} \
+ file://0001-compiler-support-OpenEmbedded-nodistro-internal-aarc.patch \
+"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "438ff717ff6d46754fce1e10c6d3a3828cff77c9"
+
+TARGET_PRODUCT_j7 = "j721e_linux"
+TARGET_PRODUCT_am62xx = "am62_linux"
+TARGET_BVNC_j7 = "22.104.208.318"
+TARGET_BVNC_am62xx = "33.15.11.3"
+PVR_BUILD = "release"
+PVR_WS = "wayland"
+
+EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}" RGX_BVNC=${TARGET_BVNC} BUILD=${PVR_BUILD} PVR_BUILD_DIR=${TARGET_PRODUCT} WINDOW_SYSTEM=${PVR_WS}'
+
+do_install() {
+ make -C ${STAGING_KERNEL_DIR} M=${B}/binary_${TARGET_PRODUCT}_${PVR_WS}_${PVR_BUILD}/target_aarch64/kbuild INSTALL_MOD_PATH=${D}${root_prefix} PREFIX=${STAGING_DIR_HOST} modules_install
+}
diff --git a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
similarity index 77%
rename from recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb
rename to recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
index 5194015e..611cbabe 100644
--- a/recipes-graphics/libgles/ti-img-rogue-umlibs_1.13.5776728.bb
+++ b/recipes-graphics/libgles/ti-img-rogue-umlibs_1.15.6133109.bb
@@ -1,5 +1,5 @@
DESCRIPTION = "Userspace libraries for PowerVR Rogue GPU on TI SoCs"
-HOMEPAGE = "http://git.ti.com/graphics/ti-img-rogue-umlibs"
+HOMEPAGE = "https://bitbucket.itg.ti.com/scm/lcpd-priv-sdk/rogue_umlibs.git"
LICENSE = "TI-TFL"
LIC_FILES_CHKSUM = "file://LICENSE;md5=7232b98c1c58f99e3baa03de5207e76f"
@@ -8,17 +8,18 @@ inherit features_check
REQUIRED_MACHINE_FEATURES = "gpu"
PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7"
+COMPATIBLE_MACHINE = "j7|am62xx"
-PR = "r3"
+PR = "r1"
-BRANCH = "linuxws/dunfell/k5.10/${PV}"
+BRANCH = "am62xx-wakeup"
-SRC_URI = "git://git.ti.com/graphics/ti-img-rogue-umlibs.git;branch=${BRANCH}"
+SRC_URI = "git://git@.../lcpd-priv-sdk/rogue_umlibs.git;protocol=ssh;branch=${BRANCH}"
-SRCREV = "5ef38353c38d921a65ea6df75c7b6ce710b66034"
+SRCREV = "4de3317c83c9f5a3681bf3660527673f3226e401"
-PVR_SOC ?= "j721e_linux"
+TARGET_PRODUCT_j7 = "j721e_linux"
+TARGET_PRODUCT_am62xx = "am62_linux"
PVR_BUILD ?= "release"
PVR_WS = "wayland"
@@ -50,7 +51,7 @@ RRECOMMENDS_${PN} += "ti-img-rogue-driver"
S = "${WORKDIR}/git"
do_install () {
- oe_runmake install DESTDIR=${D} TARGET_PRODUCT=${PVR_SOC} BUILD=${PVR_BUILD} WINDOW_SYSTEM=${PVR_WS}
+ oe_runmake install DESTDIR=${D} TARGET_PRODUCT=${TARGET_PRODUCT} BUILD=${PVR_BUILD} WINDOW_SYSTEM=${PVR_WS}
chown -R root:root ${D}
}


[dunfell][PATCH 06/11] recipes-bsp: lpm-demo: Introduce low power mode demo package

Ryan Eatmon
 

From: Nikhil Devshatwar <nikhil.nd@...>

On am62xx-evm, for low power validation, the system boot using
an initramfs.

Package the tisdk-tiny-image.cpio file in the /boot of the
default filesystem to enable the demo.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/lpm-demo/files/GPL-2 | 340 +++++++++++++++++++++++++++
recipes-bsp/lpm-demo/lpm-demo_1.0.bb | 28 +++
2 files changed, 368 insertions(+)
create mode 100644 recipes-bsp/lpm-demo/files/GPL-2
create mode 100644 recipes-bsp/lpm-demo/lpm-demo_1.0.bb

diff --git a/recipes-bsp/lpm-demo/files/GPL-2 b/recipes-bsp/lpm-demo/files/GPL-2
new file mode 100644
index 00000000..d60c31a9
--- /dev/null
+++ b/recipes-bsp/lpm-demo/files/GPL-2
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/recipes-bsp/lpm-demo/lpm-demo_1.0.bb b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
new file mode 100644
index 00000000..56b04d56
--- /dev/null
+++ b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
@@ -0,0 +1,28 @@
+SUMMARY = "Low power mode demo"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-2;md5=94d55d512a9ba36caa9b7df079bae19f"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "am62xx-evm"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+S = "${WORKDIR}"
+
+# We need to have the license file from some source. In this case, there
+# is no source. Hence pointing to the license file only
+SRC_URI = "file://GPL-2"
+
+LPM_RAMFS_IMAGE ?= "tisdk-tiny-image"
+
+do_install() {
+ install -d ${D}/boot
+ if [ -f ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ]; then
+ install -m 0644 ${DEPLOY_DIR_IMAGE}/${LPM_RAMFS_IMAGE}-${MACHINE}.cpio ${D}/boot
+ else
+ bberror "Could not find LPM ramfs image (${LPM_RAMFS_IMAGE}-${MACHINE}.cpio) in deploy dir!"
+ fi
+}
+
+do_install[depends] = "${LPM_RAMFS_IMAGE}:do_image_complete"
+
+FILES_${PN} = "/boot"
--
2.17.1


[dunfell][PATCH 10/11] ti-rtos: Fix AM62x Fix MCU core numbers

Ryan Eatmon
 

From: Hari Nagalla <hnagalla@...>

Signed-off-by: Hari Nagalla <hnagalla@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
index ecf54123..fd2b08ae 100644
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -81,7 +81,7 @@ do_install_prepend_am64xx() {
# Update the am62xx ipc binaries to be consistent with other platforms
do_install_prepend_am62xx() {
( cd ${RTOS_IPC_FW_DIR}; \
- mv am62-mcu-m4f0_0-fw ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f; \
+ mv am62-mcu-m4f0_0-fw ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f; \
)
}

@@ -164,7 +164,7 @@ do_install_am64xx() {

do_install_am62xx() {
install -d ${LEGACY_IPC_FW_DIR}
- install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
+ install -m 0644 ${RTOS_IPC_FW_DIR}/ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f ${LEGACY_IPC_FW_DIR}
# DM Firmware
install -m 0644 ${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f ${LEGACY_DM_FW_DIR}
}
@@ -321,7 +321,7 @@ ALTERNATIVE_TARGET[am64-main-r5f1_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_e
ALTERNATIVE_TARGET[am64-main-r5f1_1-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu2_1_release_strip.xer5f"
ALTERNATIVE_TARGET[am64-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu3_0_release_strip.xer5f"

-ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu1_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[am62-mcu-m4f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_baremetal_test_mcu2_0_release_strip.xer5f"
ALTERNATIVE_TARGET[am62xx-main-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"

ALTERNATIVE_TARGET[j7-mcu-r5f0_0-fw] = "${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
--
2.17.1


[dunfell][PATCH 11/11] recipes-bsp: lpm-demo: Fix build errors with clean task

Ryan Eatmon
 

From: Nikhil Devshatwar <nikhil.nd@...>

lpm-demo and tifs-lpm-demo packages only install certain files.
The build breaks when rebuilding incrementally.
It fails the do_configure task.

Fix this by adding CLEANBROKEN in those recipes.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@...>
Signed-off-by: Ryan Eatmon <reatmon@...>
---
recipes-bsp/lpm-demo/lpm-demo_1.0.bb | 2 ++
recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb | 1 +
2 files changed, 3 insertions(+)

diff --git a/recipes-bsp/lpm-demo/lpm-demo_1.0.bb b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
index 56b04d56..244d7a55 100644
--- a/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
+++ b/recipes-bsp/lpm-demo/lpm-demo_1.0.bb
@@ -8,6 +8,8 @@ COMPATIBLE_MACHINE = "am62xx-evm"
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
S = "${WORKDIR}"

+CLEANBROKEN = "1"
+
# We need to have the license file from some source. In this case, there
# is no source. Hence pointing to the license file only
SRC_URI = "file://GPL-2"
diff --git a/recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb b/recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb
index bc341035..e3ba67be 100644
--- a/recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb
+++ b/recipes-bsp/tifs-lpm-stub/tifs-lpm-stub_git.bb
@@ -9,6 +9,7 @@ PV = "v2021.09a"

COMPATIBLE_MACHINE = "am62xx-evm"
PACKAGE_ARCH = "${MACHINE_ARCH}"
+CLEANBROKEN = "1"

S = "${WORKDIR}/git"
TARGET = "ti-fs-stub-firmware-am62x-gp.signed.bin"
--
2.17.1

421 - 440 of 14961