Hi all I'm working on and mx51evk babbage board. I have a lvds display connected ti disp1 pads. I need to define DI1_DISP_CLK for pad J18 of the BGA (the chip is 19x19mm) I know the pad definition is

From: Ming Liu <liu.ming50@...> The default 'autovideosink' gives very bad performance when playing H264/H265 videos on IMXQM/IMXQXP machines. Let's choose 'imxvideoconvert_g2d ! autovideosink' as the

From: Ming Liu <liu.ming50@...> Changes in V2: - Changed the Submiited link to: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1299 Ming Liu (1): gstreamer1.0-plugins-base:

From: Ming Liu <liu.ming50@...> The default 'autovideosink' gives very bad performance when playing H264/H265 videos on IMXQM/IMXQXP machines. Let's choose 'imxvideoconvert_g2d ! autovideosink' as the

Hi all, I am usnig the imx6 freescale processor. I am trying to build rootFS with yocto build "5.15-kirkstone" branch I use Sysvinit for my bootup sequence. I cannot reset the root password. I have tr

I am using a imx6 based custom board Made the build system ready using the following guide: https://www.nxp.com/docs/en/user-guide/IMX_YOCTO_PROJECT_USERS_GUIDE.pdf After cloning the yocto source, ini

Hello, Will there be a langdale branch? Or will only the master branch be used in the future? Regards, Mario

Hi, I need to include x11 in my build and consequently set DISTRO_FEATURES_append = " x11" in my local.conf. Upon invocation of bitbake however, I get an error like: | checking for GLAMOR... yes | che

New u-boot-fslc_2022.10.bb is failed always with exit code '137' which means the available memory has been exhausted, so 16 GB DDR4 RAM memory was not enough for this single recipe build on Ubuntu 20.

Hello, Using master branches, I was trying to build a core-image-minimal with MACHINE="ls1046afrwy", but it fails at qoriq-atf: ERROR: qoriq-atf-2.4-r0 do_compile: oe_runmake failed First problem: u-b

Hello, Is there standard functionality to build into an image for an i.MX8 that will allow me to detect, at application level, whether the device is running on charger, battery, and what the battery l

Hi We are creating a BSP for our i.MX 8X (i.MX 8QuadXPlus) based product. To start, we are trying to build an existing BSP as a point of reference. Have followed the instructions here: https://github.

Hi, Any read to the PCI will cause a kernel crash/hang just building for the machine out of the box It looks like a return code was removed when resolving a merge conflict in the kernel (linux-fslc-im

Hi all. Where is sdma-imx51.bin files? The recipe firmware-imx produces the package firmware-imx-sdma-imx51 which contains /lib/firmware/imx/sdma/sdma-imx51-to3.bin I don't find sdma-imx51.bin I'm usi

Hi Otavio, Hi Tim NXP released a new revision LF5.15.52_2.1.0 of their BSP [1]. What is the plan to update the recipes in meta-freescale to the versions used by LF5.15.52_2.1.0? Can we start to send p

Hi all. I working with kirkstone and imx51 (mx51evk derived board). I config u-boot-fslc to use IPUv3, but the compile task give me error because the linker doesn't find ipu_displays_init function. I

Before this change, when imxgpu2d is selected, the qt4 do_configure fails with the following error: | EGL (EGL/egl.h) auto-detection... () | compiling egl.cpp ... | /home/wrk/yocto/build-qt4/tmp/work/

Hi, The new NXP BSP is based on kirkstone, with kernel 5.15. I'd like to backport a linux-imx 5.10 based kernel, since most of our i.MX6 and i.MX8 hardware is maintained there. I have a couple of ques

Hi, I have recently tried to use the MULTILIB feature of Yocto Dunfell on a iMX8 platform and I was not able anymore to build the SDK as soon as I add the lib32-libusb1 in the package list. Libusb1 ha

Hello Patrick, I'll Cc: the meta-freescale ML here, since this a second issue of the same type reported on the TF-A changes. I guess it would be informative for the others to read it in order to avoid