Hi, I am trying to develop a custom ASoC machine driver for an i.MX6 project using yocto. I have followed the yocto provided 'hello-mod' recipe as an example for out-of-tree kernel modules, but unfort

Hi, all Version of kernel in lsdk 2108 has been upgraded to 5.10. I want to know if there is any plan to upgrade linux-qoriq in meta-freescale. It has been 5.4 for a long time. Best regards Lei

hi i am not good at English i have a problem with compiling a kernel module a board is imx6sx evk and kernel is 5.10.35 , yocto is hardknott ( is right ? i installed with this command : repo init -u h

I have been interested in communicating between the a7 and the m4 of my imx7d-pico using RPmsg for a long time. Today I found that this tutorial:https://www.youtube.com/watch?v=4zMyjaEgj2U&t=1182s I d

Hi, I've just built the hardknott branch and the kernel is not bootable on my SABRE-based platform. I was digging a little bit the linux-fslc/5.4-2.3.x-imx repo and found the commit which causes the p

Signed-off-by: Thomas Perrot <thomas.perrot@...> --- .../recipes-devtools/cst/imx-cst_3.3.0.bb | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 dynamic-layers/openembedded-

Signed-off-by: Thomas Perrot <thomas.perrot@...> --- classes/fsl-eula-unpack.bbclass | 4 +- classes/fsl-u-boot-localversion.bbclass | 2 +- .../fsl-vivante-kernel-driver-handler.bbclass | 2 +- classes/

It's been over a year now since I ran NXP's yocto release on imx8mm-evk but I believe that op-tee was included. I now find myself needing to use our eMMC RPMB for key storage since our TPM modules hav

Just built latest Freescale Community BSP core-image-minimal (kernel 5.4.67 was built) for imx8mm-evk and firmware-imx is not included in sdcard image ... which I think is why I'm getting messages lik

Hi, Currently on hardknott branch in meta-freescale, linux-fslc points to version 5.10.32. However latest 5.10 version in linux-fslc repo is 5.10.47. Would it be possible to update linux-fslc in meta-

I recently got tasked with upgrading linux kernel (which we get from freescale), to fix some vulnerabilities. I am new to this, with all engineers with previous experience in this area no longer with

Dear colleagues, Does meta-freescale have the driver to control the SGTL5000 audio codec? If so, how do I set the pins that will be used on the raspberry pi and the clock of the fixed crystal I'm usin

Hi guys I have changed my Linux kernel to 5.7 and eth0 works fine in first start. Rebooting can solve second eth problem. I find out the problem is in somewhere around drivers/net/ethernet/freescale/f

Dear FSLC Maintainers, NXP recently released tag lf-5.10.35-2.0.0 in branch lf-5.10.y of linux-imx repository. Is there any roadmap to introduce this kernel as a reference baseline for linux-fslc-imx

Hi, I'm experiencing a weird and blocking issue with gstreamer and more particularly with gst-discoverer-1.0 tool (that uses uridecodebin underlying..). We have tested on Apalis IMX8 and Colibri IMX8X

Hi all; I'm attempting to upgrade a build system that has Thud era recipes to one that targets Dunfell. We have a custom kernel and a custom u-boot (based on 2020.4) so we have our own recipes for bui

Hello Tom, We have another issue to use Samsung NAND K9F2G08U0D-SCB0, I found a similar issue posted in NXP community that NXP driver did not support similar Samsung NAND https://community.nxp.com/t5/

I'm trying to tweak an i.mx8MNDDR4EVK Board for better realtime capabilities. I'm on Zeus 5.4.70 and applied the rt-patches. Running `cyclictests -a -p95 -n -b 100` with trace-cmd and *all* events cau

Hello everyone, is there a planned support for PREEMPT-rt patch for freescale / i.MX Boards by this layer? The old "yocto-linux-rt" implementation doesn't seem to work for these boards nowadays.

Hi all, already had this issue more than one time, and solved in a way or another, but trying to figure out the most correct way to do this. This sdma firmware file on recent kernel > (4.14) could be