Hi Otavio, The meta-qoriq layer on github [1] has not been updated since 2018. I cannot submit a patch against it because these patches would not apply. --Sean [1] https://github.com/qoriq-open-source

I am a bit confused with the graphics support for the NXP BSP. It used to be Vivante, but with linux-fslc-imx it is Etnaviv although I thought it would be a linux-imx kernel with mainline patches. Is

This recipe depends on the freescale-distro collection. Move it to an appropriate dynamic layer. Signed-off-by: Sean Anderson <sean.anderson@...> --- conf/layer.conf | 2 ++ .../recipes-fsl}/images/fsl

This bbappend depends on the virtualization-layer collection. Move it under the appropriate dynamic layer directory. Signed-off-by: Sean Anderson <sean.anderson@...> --- .../virtualization-layer/recip

Hello, I'm using meta-freescale for my custom board and I have an issue with DisplayPort. I've flashed imx-boot with dp signed firmware + added dts changes but during boot I see in log: dmesg | grep d

Hi, I am currently working on adding our custom patches to linux-fslc-imx on honister. Previously, we had patched linux-imx on Gatesgarth but there seems to have changed a lot. Seems like this kernel

Hello, We are experiencing kernel crash when we are stress testing WiFi functionality. please see attachment for kernel dump (near end of log) we have read that rcu_preempt dump are sometimes caused b

Hello, I'm using a wandboard (rev d1) and building the fslc-image-network-full-cmdline image (honister branch). I've got ethernet wired to a switch on my home network, but I cannot figure out how to s

There is no subgroup for meta-imx, so I'm guessing this one is the closest. I'm trying to create a Hardknott version of Yocto for the i.MX 8M Mini board that we're using. The manufacturer (Congatec) o

Hi, I stay trying RPMsng in Yocto. In my case, I have imx7d-pico with hardknott now. I need your help to do pingpong aplication in RPMsng with or without meta-openAmp. In the last toradex webinar on d

Hi Sir, I am using NXP iMX8M Mini EVK and Yocto imx-linux-hardknott imx-5.10.52 version. Default GStreamer provided in NXP iMX BSP does not support the GStreamer C application it only supports the com

Hi, I'm using u-boot U-Boot 2019.04-4.19.35-1.1.0+g4d377539a1 in pre-programmed NOR flash and was using linux-fslc-imx 5.4.114 kernel and fw_printenv/fw_setenv were working fine. After upgrading to li

Hi, At first I was chasing why fw_setenv (see thread "fw_printenv works but fw_setenv does not after switching to linux-fslc-imx 5.10.69 from linux-fslc-imx 5.4.112") quit working after updating to li

Hi, I'm working on new board based on imx8m mini and in my MACHINEOVERRIDES in when checking `bitbake -e` I have following list: aarch64:armv8a:use-mainline-bsp:my-machine-name In machine config file

Hi, First, forgive me for posting a link in an post with no context ... I hit a wrong button and accidentally sent before ready. Bottom line up front. How can I get a 5.10 kernel with multi-lane suppo

https://source.codeaurora.org/external/imx/linux-imx/tree/sound/soc/fsl/fsl_sai.c?h=lf-5.10.y

Hello Community, I am getting one issue in yocto I am trying to execute a python script from inside IMAGE_CMD_tar_append (){ python3 myscript.py } getting following errors from Crypto.PublicKey import

Hi, We are currently using Linux v5.4 for i.MX8 provided by recipe linux-fslc-imx_5.4.bb because as mentioned in recipe as well, branch "5.4-2.3.x-imx" from repo "linux-fslc" get changes merged from b

Hi everyone, I see a lot of open issues from the past 2 or 3 years on github/Freescale projects and I'm trying to (slowly) address them as best I can. I'm going to close some of them, and try to assig

Hi, I am trying to develop a custom ASoC machine driver for an i.MX6 project using yocto. I have followed the yocto provided 'hello-mod' recipe as an example for out-of-tree kernel modules, but unfort