Signed-off-by: Thomas Perrot <thomas.perrot@...> --- classes/fsl-eula-unpack.bbclass | 4 +- classes/fsl-u-boot-localversion.bbclass | 2 +- .../fsl-vivante-kernel-driver-handler.bbclass | 2 +- classes/

It's been over a year now since I ran NXP's yocto release on imx8mm-evk but I believe that op-tee was included. I now find myself needing to use our eMMC RPMB for key storage since our TPM modules hav

Just built latest Freescale Community BSP core-image-minimal (kernel 5.4.67 was built) for imx8mm-evk and firmware-imx is not included in sdcard image ... which I think is why I'm getting messages lik

Hi, Currently on hardknott branch in meta-freescale, linux-fslc points to version 5.10.32. However latest 5.10 version in linux-fslc repo is 5.10.47. Would it be possible to update linux-fslc in meta-

I recently got tasked with upgrading linux kernel (which we get from freescale), to fix some vulnerabilities. I am new to this, with all engineers with previous experience in this area no longer with

Dear colleagues, Does meta-freescale have the driver to control the SGTL5000 audio codec? If so, how do I set the pins that will be used on the raspberry pi and the clock of the fixed crystal I'm usin

Hi guys I have changed my Linux kernel to 5.7 and eth0 works fine in first start. Rebooting can solve second eth problem. I find out the problem is in somewhere around drivers/net/ethernet/freescale/f

Dear FSLC Maintainers, NXP recently released tag lf-5.10.35-2.0.0 in branch lf-5.10.y of linux-imx repository. Is there any roadmap to introduce this kernel as a reference baseline for linux-fslc-imx

Hi, I'm experiencing a weird and blocking issue with gstreamer and more particularly with gst-discoverer-1.0 tool (that uses uridecodebin underlying..). We have tested on Apalis IMX8 and Colibri IMX8X

Hi all; I'm attempting to upgrade a build system that has Thud era recipes to one that targets Dunfell. We have a custom kernel and a custom u-boot (based on 2020.4) so we have our own recipes for bui

Hello Tom, We have another issue to use Samsung NAND K9F2G08U0D-SCB0, I found a similar issue posted in NXP community that NXP driver did not support similar Samsung NAND https://community.nxp.com/t5/

I'm trying to tweak an i.mx8MNDDR4EVK Board for better realtime capabilities. I'm on Zeus 5.4.70 and applied the rt-patches. Running `cyclictests -a -p95 -n -b 100` with trace-cmd and *all* events cau

Hello everyone, is there a planned support for PREEMPT-rt patch for freescale / i.MX Boards by this layer? The old "yocto-linux-rt" implementation doesn't seem to work for these boards nowadays.

Hi all, already had this issue more than one time, and solved in a way or another, but trying to figure out the most correct way to do this. This sdma firmware file on recent kernel > (4.14) could be

Hi, Yesterday I checked out Hardknott (creating layers manually due to repo sync issues) and tried to build core-image-base for my imx8mm-evk. First I noticed that there wasn't a machine config for im

Hi, repo sync fails with hardknott: repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b hardknott hutch@Gondor:~/yocto/imx8/fsl-community-bsp_hardknott$ repo sync Fetching: 0% (0/7

Airbus Amber Hello all. I receive this error when compiling a récipe with bitbake. ERROR: Command Error: exit status: 1 Output: Applying patch work-with-openssl-1.0.2.patch can't find file to patch at

From: Ming Liu <liu.ming50@...> We have renamed UBOOT_BINARY with '-nand' suffix to indicate it's a image that should be flashed to NAND device, do the same to UBOOT_IMAGE, otherwise developers might

I have crated rootfs with Yocto Rocko . I am running Qt application on it with X11 support. What I observed booting log : RandR extension missing matchbox: Cant find a keycode for keysym 269025056 mat

I tried building latest master. core-image-base builds fine. core-image-weston fails with this error: nothing provides xserver-xorg-xwayland needed by weston-xwayland-9.0.0.imx-r0.cortexa53-crypto-mx8