Hello all, After the recent upgrade of Weston (commit: a4fdb4074644bda09b46490163886065b4c00aab) I started to receive the error from G2D on i.MX8M Mini at the start with following output: ------------

Hi all, I'm working on a system using HAB to verify u-boot and then using a public key included in u-boot's device tree to verify a FIT image before booting, on an imx device. Internally we've develop

Hello, I am trying to migrate a project from Yocto Pyro (3.14 kernel) to Sumo and a newer kernel on the i.MX6 Wandboard Quad. I am following the instructions in the i.MX_Yocto_Project_User's_Guide, to

Hi Team, I am trying build qt webengine with 4.14 kernel on vivante gpu drivers(imx-gpu). But build is failing with following error. ERROR: Nothing PROVIDES 'virtual/libgbm'mesa PROVIDES virtual/libgb

Hi all, I've been battling with upgrading the kernel our imx6qdl based custom board using Yocto Thud. We have been happily running the linux-imx 4.1-2 kernel, but it's time to push it forward to the 4

I've tried build linux-variscite where the maintainers seem to have copied the 'merge_delta_config' task from the linux-qoriq recipe from meta-freescale. When i tried to use that task to add some linu

I've noticed there are a few places where the meta-freescale mailing list is mentioned, but they all seem to refer to a mailman instance, not groups.io - resulting in a 404 error. I've submitted a pul

From: Ming Liu <liu.ming50@...> The sdma firmware of mx7d/mx6 are being installed to ${base_libdir}/firmware/imx/sdma, so they should be split into their own packages by matching that directory. Also

Hello, I am trying to integrate AMD E9171 with t1042d4rdb-64b. PCIe is not mapping memory for GPU so gpu driver is throwing error with exit code -12(which is OUT_OF_MEMORY error). I am told that I sho

i use yocto warrior with qt 5.12.5(warrior) i use fsl-wayland with weston enabled here is my complete bug report to qt company https://bugreports.qt.io/browse/QTBUG-80281 but i think the problem is fo

Hi, Please can I know the steps to create the yocto setup with linux mainline 4.19.35. Thanks&Regards Dhanush v

Hello, Currently the .sdimage being built for my i.MX8MQ EVK contains a 64MB boot partition, which is not being mounted at /boot by default. I would like to be able to upgrade the kernel using dnf, bu

Hi, I am exploring the Yocto BSP's provided by https://source.codeaurora.org/external/imx/imx-manifestin preparation for a i.MX8 EVK we are going to receive. My question is whether the imx-linux-thud

After backing out of the first attempt to migrate we are again moving our lists from Mailman to Groups.io. E-mail to lists will be delayed during the move window on November 21st between 17:00 and 23:

Hello, Is there any meta-freescale repo compatible with NXP SDK 2.0 - 1703 ? I tried this https://github.com/Freescale/meta-freescale/tree/master but there was a couple of errors (Like missing package

Hello, I have an imx8mqevk and have been running into a frustrating issue attempting to get the kernel to build some drivers as modules. My build environment: BB_VERSION = "1.40.0" BUILD_SYS = "x86_64

Hello, First of all, I am using NXP T1042D4RDB-64B board. They have linux sdk which is https://www.nxp.com/docs/en/supporting-information/QORIQ-SDK-2.0-IC-REV0.pdf My problem is, I am trying to add ne

Hello, I am attempting to build the 4.9.x+fslc kernel for the i.MX6 Wandboard Quad and bitbake fails because I do not have a correct SRCREV value in my new recipe for the kernel. The error report I ge

From: Chunrong Guo <chunrong.guo@...> * fix missing startup.conf Signed-off-by: Chunrong Guo <chunrong.guo@...> --- recipes-extended/vpp-core/vpp-core.bb | 5 +++++ 1 file changed, 5 insertions(+) diff