Hello, I would like to know if it is possible to use Etnaviv driver instead of IMX-GPU-VIV on the IMX8MQEVK for hardware acceleration ? Did someone already manage to setup such configuration in a Yoct

Sorry if this is the wrong mailing list. We want to build a desktop environment for i.mx8m mini EVK. As only wayland is supported with GPU acceleration which desktop environments we can build out of t

I have no clue what my problem is here. I built imx8mm-evk.dtb (kernel version 5.4.51) in Yocto meta-freescale environment from Dunfell/Yocto 3.1.1, and then moved on to Dunfell/Yocto 3.1.2. Looks lik

Hello; I'm working on a Ubuntu 18.04 machine. and NXP release L5.4.24 for IMX8M Mini. I did successfully "bitbake" my custom image. Then I am trying to add support for openjdk-8. Referred " How to add

I'm using a custom board/custom distro, based on yocto Dunfell. It's using vivante drivers (so not etnaviv). Running kernel is: 5.4-2.1.x-imx X11 itself is working fine. Although I get a VivDRIScreenI

On i.MX6 machines, it is currently not possible to use the ION allocator. However, there is no hardware limitation that requires ION to be disabled. If ION were enabled, with a CMA heap, then it would

Hello all, Tried to add chromium to NXP-BSP like it is described in IMX_YOCTO_PROJECT_USERS_GUIDE.pdf for L5.4.47_2.2.0 for NXP-Zeus-2.2.0 BSP for imx6qsabresd Error was: ERROR: chromium-ozone-wayland

Hi ,All, I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs : ERROR

From: Ming Liu <liu.ming50@...> It was dropped by commit 65100fad: [ imx-mkimage: upgrade to version 1.0 ] after that, the following error was observed again: | ./mkimage_uboot -E -p 0x3000 -f u-boot.

Hi all, I get build errors when building plain yocto Dunfell for the iMX6 SABRESD plattform (not mainline) The setup was (under Ubuntu 16.04): $ repo init -u https://github.com/Freescale/fsl-community

Hi, I have recently started working on a project that is based on linux-fslc. The target board is a Technexion pico imx7d. Hopefully I have come to the right place to ask this question and this post p

Hello, This is probably a question for NXP themselves but I thought I would try the collective wisdom of the mailing list first. When I build images for the i.MX6 I can build the OpenGL ES support to

Hi, Bottom line up front, built fsl-community-bsp dunfell for imx8mmevk and Linux 5.4 kernel hangs on boot. So far I've been NXP official releases. I really needed the 5.4 kernel so was excited when I

Hi, By latest meta-freescale, perf build failed, the error is as following: --------------------------------------------- aarch64-ubinux-linux-ld: /ubinux-dev/build-ubinux-armv8-multlib-daily/tmp/work

Hi all. I'm working on a imx51evk clone board and Zeus. U-boot-fslc restart with POR cause. Where i can find good docs for Zeus and imx51evk? Best regards, MZ

Hello, I want to connect 2 identical FHD screens (timing-wise) to my imx6q board. One is LCD and the other one (dualchannel) LVDS. I only want to render content once (for perfomance) and output it on

How do you correctly put a parallel lcd display in linux 5.4? Uptill 4.9, there was a mxc_lcdif.c, but seems to be missing now? In the devicetree, you used to add a node which had compatible="fsl,lcd"

Hi, I'm porting a custom MX6DL board from linux-imx to linux-fslc (along with use-mainline-bsp in FEATURES). The primary reason for this choice was for etnaviv support and a general preference for a m

I've just developed and tested cyclic DMA transfer for a SPI device on a IMX6UL with kernel 4.9.88 I wanted to have a single SPI transfer repeated continuously in order to feed a DAC for generation of

Hi, Toradex is currently working on integrating the new NXP release 'L5.4.24_2.1.0'. For this we created a new kernel branch '5.4-2.1.x-imx' based on NXP's kernel 'imx_5.4.24_2.1.0'. We already merged