Hello all, Tried to add chromium to NXP-BSP like it is described in IMX_YOCTO_PROJECT_USERS_GUIDE.pdf for L5.4.47_2.2.0 for NXP-Zeus-2.2.0 BSP for imx6qsabresd Error was: ERROR: chromium-ozone-wayland

Hi ,All, I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs : ERROR

From: Ming Liu <liu.ming50@...> It was dropped by commit 65100fad: [ imx-mkimage: upgrade to version 1.0 ] after that, the following error was observed again: | ./mkimage_uboot -E -p 0x3000 -f u-boot.

Hi all, I get build errors when building plain yocto Dunfell for the iMX6 SABRESD plattform (not mainline) The setup was (under Ubuntu 16.04): $ repo init -u https://github.com/Freescale/fsl-community

Hi, I have recently started working on a project that is based on linux-fslc. The target board is a Technexion pico imx7d. Hopefully I have come to the right place to ask this question and this post p

Hello, This is probably a question for NXP themselves but I thought I would try the collective wisdom of the mailing list first. When I build images for the i.MX6 I can build the OpenGL ES support to

Hi, Bottom line up front, built fsl-community-bsp dunfell for imx8mmevk and Linux 5.4 kernel hangs on boot. So far I've been NXP official releases. I really needed the 5.4 kernel so was excited when I

Hi, By latest meta-freescale, perf build failed, the error is as following: --------------------------------------------- aarch64-ubinux-linux-ld: /ubinux-dev/build-ubinux-armv8-multlib-daily/tmp/work

Hi all. I'm working on a imx51evk clone board and Zeus. U-boot-fslc restart with POR cause. Where i can find good docs for Zeus and imx51evk? Best regards, MZ

Hello, I want to connect 2 identical FHD screens (timing-wise) to my imx6q board. One is LCD and the other one (dualchannel) LVDS. I only want to render content once (for perfomance) and output it on

How do you correctly put a parallel lcd display in linux 5.4? Uptill 4.9, there was a mxc_lcdif.c, but seems to be missing now? In the devicetree, you used to add a node which had compatible="fsl,lcd"

Hi, I'm porting a custom MX6DL board from linux-imx to linux-fslc (along with use-mainline-bsp in FEATURES). The primary reason for this choice was for etnaviv support and a general preference for a m

I've just developed and tested cyclic DMA transfer for a SPI device on a IMX6UL with kernel 4.9.88 I wanted to have a single SPI transfer repeated continuously in order to feed a DAC for generation of

Hi, Toradex is currently working on integrating the new NXP release 'L5.4.24_2.1.0'. For this we created a new kernel branch '5.4-2.1.x-imx' based on NXP's kernel 'imx_5.4.24_2.1.0'. We already merged

Hi, I'm looking into doing the rt patch against linux-fslc-imx 5.4.51. Doesn't look like anyone has done this for the imx8mm. I see a recipe for linux-fslc-imx-rt 4.1.-1.0.x but looks like it's for th

Hello, I have a custom board that has IMX6 Solo Automotive Grade SoC. I need to bring it up with Automotive Grade Linux. (Using linux-fslc 4.20). I have copied mx6sabreauto machine and renamed it to s

Hi everyone, I have a big problem during the compilation of the Yocto project. I have an error with the file firmware-imx_5.4.bb and the file firmware-imx.inc. I have tried everything. Please, some ca

Hi all, I'm working on a custom board based on IMX8MM. My RAM calibration tool works only with u-boot 2018.03 to 2018.04, and I already have a u-boot recipe with all the patches necessary. In sumo bra

Hello, I'm trying to fix and add some variables to my recipes-bsp/conf/machine/imx8mmdddr3lval.conf file, like editing MACHINE_FEATURES , and SERIAL_CONSOLES . I already have a separate layer that pat

Hello, I am not sure if this is the right place to ask this, so I would be very grateful if you could point me in the right direction, if not… I have a custom board which uses the TXUL-8013 SoC module