|
Yocto browser require low memory footprints
#yocto
#meta-freescale
I've used 'links' browser, which is very light-weight but also very minimal features. If your pre-rendered html is fairly simple, it might work out; probably worth taking a look at how some example pa
I've used 'links' browser, which is very light-weight but also very minimal features. If your pre-rendered html is fairly simple, it might work out; probably worth taking a look at how some example pa
|
By
S. Lockwood-Childs
· #24853
·
|
|
Yocto browser require low memory footprints
#yocto
#meta-freescale
You might try WPEWebKit. I've used it before and it's good for a very minimal display of web content while still being fairly full featured. > >
You might try WPEWebKit. I've used it before and it's good for a very minimal display of web content while still being fairly full featured. > >
|
By
Joshua Watt
· #24852
·
|
|
Yocto browser require low memory footprints
#yocto
#meta-freescale
Hi , We are using Yocto Linux 3.0 zeus branch on imx6 based SOC. we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports. as of now we are using chromium versio
Hi , We are using Yocto Linux 3.0 zeus branch on imx6 based SOC. we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports. as of now we are using chromium versio
|
By
yogeshbsa89@...
· #24851
·
|
|
GStreamer Cross compilation for iMX8M Mini Yocto
#compilation
#hardknott
#imx7ulpevk
#meta-freescale
#yocto
The default GStreamer provided in iMX8 yocto only supports the command line it does not support GStreamer C code hence I need to cross-compile the GStreamer library for iMX8M Mini Yocto. I tried addin
The default GStreamer provided in iMX8 yocto only supports the command line it does not support GStreamer C code hence I need to cross-compile the GStreamer library for iMX8M Mini Yocto. I tried addin
|
By
maneeshsingh1920@...
· #24821
·
|
|
linux-fslc 5.4.114: rcu_preempt detected stalls on IMX7D
#dunfell
#meta-freescale
Ok, understood. The RTL8822 driver available in the kernel is for PCI-only. You should push Realtek to upstream RTL8822CS SDIO support as working with an out-of-tree driver is too painful. I suggest y
Ok, understood. The RTL8822 driver available in the kernel is for PCI-only. You should push Realtek to upstream RTL8822CS SDIO support as working with an out-of-tree driver is too painful. I suggest y
|
By
Fabio Estevam
· #24808
·
|
|
linux-fslc 5.4.114: rcu_preempt detected stalls on IMX7D
#dunfell
#meta-freescale
On Tue, Jan 11, 2022 at 10:06 AM Fabio Estevam via lists.yoctoproject.org <festevam=gmail.com@...> wrote: Ah, the driver is available at drivers/net/wireless/realtek/rtw88/rtw8822c.
On Tue, Jan 11, 2022 at 10:06 AM Fabio Estevam via lists.yoctoproject.org <festevam=gmail.com@...> wrote: Ah, the driver is available at drivers/net/wireless/realtek/rtw88/rtw8822c.
|
By
Fabio Estevam
· #24807
·
|
|
linux-fslc 5.4.114: rcu_preempt detected stalls on IMX7D
#dunfell
#meta-freescale
Hi Benson, Looking at your log, I see you use an rtl8822 Wifi device, which is not supported in the mainline kernel. I assume you use an out-of-tree driver, right? When using out-of-tree drivers, it i
Hi Benson, Looking at your log, I see you use an rtl8822 Wifi device, which is not supported in the mainline kernel. I assume you use an out-of-tree driver, right? When using out-of-tree drivers, it i
|
By
Fabio Estevam
· #24806
·
|
|
linux-fslc 5.4.114: rcu_preempt detected stalls on IMX7D
#dunfell
#meta-freescale
Hello, Em ter., 11 de jan. de 2022 às 07:08, <benson_young@...> escreveu: You'll need to compare the branches and see if it has been fixed in a newer kernel release.
Hello, Em ter., 11 de jan. de 2022 às 07:08, <benson_young@...> escreveu: You'll need to compare the branches and see if it has been fixed in a newer kernel release.
|
By
Otavio Salvador
· #24805
·
|
|
linux-fslc 5.4.114: rcu_preempt detected stalls on IMX7D
#dunfell
#meta-freescale
Hello, We are experiencing kernel crash when we are stress testing WiFi functionality. please see attachment for kernel dump (near end of log) we have read that rcu_preempt dump are sometimes caused b
Hello, We are experiencing kernel crash when we are stress testing WiFi functionality. please see attachment for kernel dump (near end of log) we have read that rcu_preempt dump are sometimes caused b
|
By
benson_young@...
· #24804
·
Edited
|
|
How to Cross Compile GStreamer for NXP iMX8M Mini using Yocto
#meta-freescale
#imx7ulpevk
#yocto
#hardknott
Hi, Is there anyone on this forum who can help me ? Thanks, Maneesh
Hi, Is there anyone on this forum who can help me ? Thanks, Maneesh
|
By
maneeshsingh1920@...
· #24795
·
|
|
How to Cross Compile GStreamer for NXP iMX8M Mini using Yocto
#meta-freescale
#imx7ulpevk
#yocto
#hardknott
Hi Sir, I am using NXP iMX8M Mini EVK and Yocto imx-linux-hardknott imx-5.10.52 version. Default GStreamer provided in NXP iMX BSP does not support the GStreamer C application it only supports the com
Hi Sir, I am using NXP iMX8M Mini EVK and Yocto imx-linux-hardknott imx-5.10.52 version. Default GStreamer provided in NXP iMX BSP does not support the GStreamer C application it only supports the com
|
By
maneeshsingh1920@...
· #24794
·
|
|
#meta-freescale #hardknott Can't remove use-mainline-bsp from MACHINEOVERRIDES
#meta-freescale
#hardknott
Many thanks! for my case all I needed was to make sure IMX_DEFAULT_BSP was not set to mainline. Thanks a lot, Regards, Marek
Many thanks! for my case all I needed was to make sure IMX_DEFAULT_BSP was not set to mainline. Thanks a lot, Regards, Marek
|
By
...
· #24778
·
|
|
#meta-freescale #hardknott Can't remove use-mainline-bsp from MACHINEOVERRIDES
#meta-freescale
#hardknott
Hello Marek, This machine override is added based on the BSP flavor that the distro layer sets. BSP flavor is defined as either "mainline" which consumes only OSS components, or "nxp" which adds NXP p
Hello Marek, This machine override is added based on the BSP flavor that the distro layer sets. BSP flavor is defined as either "mainline" which consumes only OSS components, or "nxp" which adds NXP p
|
By
Andrey Zhizhikin
· #24777
·
|
|
#meta-freescale #hardknott Can't remove use-mainline-bsp from MACHINEOVERRIDES
#meta-freescale
#hardknott
Hi, I'm working on new board based on imx8m mini and in my MACHINEOVERRIDES in when checking `bitbake -e` I have following list: aarch64:armv8a:use-mainline-bsp:my-machine-name In machine config file
Hi, I'm working on new board based on imx8m mini and in my MACHINEOVERRIDES in when checking `bitbake -e` I have following list: aarch64:armv8a:use-mainline-bsp:my-machine-name In machine config file
|
By
...
· #24776
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
pon., 16 sie 2021 o 14:44 Andrey Zhizhikin <andrey.z@...> napisał(a): Thanks for pointing it out. I will check it for sure.
pon., 16 sie 2021 o 14:44 Andrey Zhizhikin <andrey.z@...> napisał(a): Thanks for pointing it out. I will check it for sure.
|
By
Piotr
· #24742
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
Hello Piotr, That is the trick: [dunfell] uses 5.4-2.1.x-imx branch, where the proper check for the return of of_get_mac_address() is not implemented. [hardknott] uses 5.4-2.3.x-imx branch, which cont
Hello Piotr, That is the trick: [dunfell] uses 5.4-2.1.x-imx branch, where the proper check for the return of of_get_mac_address() is not implemented. [hardknott] uses 5.4-2.3.x-imx branch, which cont
|
By
Andrey Zhizhikin
· #24741
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
pon., 16 sie 2021 o 13:39 Andrey Zhizhikin <andrey.z@...> napisał(a): Yes I'm sure. I have tested it several times and with this commit reverted, the board boots successfully exactly the same as
pon., 16 sie 2021 o 13:39 Andrey Zhizhikin <andrey.z@...> napisał(a): Yes I'm sure. I have tested it several times and with this commit reverted, the board boots successfully exactly the same as
|
By
Piotr
· #24739
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
Hello Piotr, From what I see, the d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") is indeed present on all NXP branches in the repository: $ git branch -r --contains d01f449c008a upst
Hello Piotr, From what I see, the d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") is indeed present on all NXP branches in the repository: $ git branch -r --contains d01f449c008a upst
|
By
Andrey Zhizhikin
· #24738
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
Hello Piotr, Em ter., 10 de ago. de 2021 às 10:13, Piotr <piotr.piwko@...> escreveu: I didn't check what those two changes do but I believe it'd be better to keep the of_get_mac_address working
Hello Piotr, Em ter., 10 de ago. de 2021 às 10:13, Piotr <piotr.piwko@...> escreveu: I didn't check what those two changes do but I believe it'd be better to keep the of_get_mac_address working
|
By
Otavio Salvador
· #24730
·
|
|
#meta-freescale Broken linux-fslc/5.4-2.3.x-imx repo on hardknott branch
#meta-freescale
I've take a look at the mainline linux tree and seems that the above commit is still not merged there. According to that, I think it will be better to revert 845620ec5d3b.
I've take a look at the mainline linux tree and seems that the above commit is still not merged there. According to that, I think it will be better to revert 845620ec5d3b.
|
By
Piotr
· #24729
·
|