Date   

[IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Wouter Vanhauwaert
 

I'm using a custom board/custom distro, based on yocto Dunfell. It's using vivante drivers (so not etnaviv).
Running kernel is: 5.4-2.1.x-imx
X11 itself is working fine. Although I get a VivDRIScreenInit -releated error message in the log:

X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[    34.528] Build Operating System: Linux 
[    34.528] Current Operating System: Linux imx6qtelevic_generic 5.4.46-04202-gd069a637b280 #15 SMP PREEMPT Wed Oct 14 12:13:42 CEST 2020 armv7l
[    34.528] Kernel command line: version=DEV_33968064_1-04-02 console=ttymxc3,115200 ubi.mtd=0 root=ubi0:rootfsA rootfstype=ubifs mtdparts=gpmi-nand:-(ubipart) quiet
[    34.528] Build Date: 29 March 2020  08:21:46PM
[    34.528]  
[    34.534] Current version of pixman: 0.38.4
[    34.535] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    34.535] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.538] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar  9 12:41:08 2018
[    34.565] (==) Using config file: "/etc/X11/xorg.conf"
[    34.566] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.574] (==) No Layout section.  Using the first Screen section.
[    34.576] (==) No screen section available. Using defaults.
[    34.576] (**) |-->Screen "Default Screen Section" (0)
[    34.576] (**) |   |-->Monitor "<default monitor>"
[    34.584] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    34.584] (**) |   |-->Device "i.MX Accelerated Framebuffer Device"
[    34.584] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    34.585] (**) Option "BlankTime" "0"
[    34.585] (**) Option "StandbyTime" "0"
[    34.585] (**) Option "SuspendTime" "0"
[    34.585] (**) Option "OffTime" "0"
[    34.586] (==) Automatically adding devices
[    34.586] (==) Automatically enabling devices
[    34.586] (==) Automatically adding GPU devices
[    34.588] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    34.589] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[    34.589] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (==) FontPath set to:
 
[    34.591] (==) ModulePath set to "/usr/lib/xorg/modules"
[    34.591] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.600] (II) Loader magic: 0x5f8d80
[    34.600] (II) Module ABI versions:
[    34.600] X.Org ANSI C Emulation: 0.4
[    34.601] X.Org Video Driver: 24.1
[    34.601] X.Org XInput driver : 24.1
[    34.601] X.Org Server Extension : 10.0
[    34.610] (II) no primary bus or device found
[    34.614] (II) LoadModule: "glx"
[    34.630] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    34.793] (II) Module glx: vendor="X.Org Foundation"
[    34.794] compiled for 1.20.8, module version = 1.0.0
[    34.794] ABI class: X.Org Server Extension, version 10.0
[    34.797] (II) LoadModule: "vivante"
[    34.798] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
[    34.809] (II) Module vivante: vendor="X.Org Foundation"
[    34.809] compiled for 1.20.8, module version = 1.0.0
[    34.810] ABI class: X.Org Video Driver, version 24.1
[    34.812] (II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
VivanteGCCORE
[    34.814] (--) using VT number 3
 
[    34.830] (WW) Falling back to old probe method for vivante
[    34.831] (II) Loading sub module "fbdevhw"
[    34.831] (II) LoadModule: "fbdevhw"
[    34.832] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    34.842] (II) Module fbdevhw: vendor="X.Org Foundation"
[    34.843] compiled for 1.20.8, module version = 0.0.2
[    34.843] ABI class: X.Org Video Driver, version 24.1
[    34.843] (II) VIVANTE(0): using default device
[    34.849] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    34.857] (II) VIVANTE(0): Device preferred mode 'fb0':U:1280x800p-59 
[    34.857] (II) VIVANTE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    34.858] (==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
[    34.858] (==) VIVANTE(0): RGB weight 888
[    34.858] (==) VIVANTE(0): Default visual is TrueColor
[    34.858] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
[    34.858] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[    34.858] (**) VIVANTE(0): mExaHwType:1
[    34.858] (II) VIVANTE(0): checking modes against framebuffer device...
[    34.858] (II) VIVANTE(0): checking modes against monitor...
[    34.858] (II) VIVANTE(0): Virtual size is 0x0 (pitch 0)
[    34.858] (==) VIVANTE(0): DPI set to (96, 96)
[    34.858] (II) Loading sub module "fb"
[    34.859] (II) LoadModule: "fb"
[    34.859] (II) Loading /usr/lib/xorg/modules/libfb.so
[    34.889] (II) Module fb: vendor="X.Org Foundation"
[    34.889] compiled for 1.20.8, module version = 1.0.0
[    34.889] ABI class: X.Org ANSI C Emulation, version 0.4
[    34.889] (II) Loading sub module "exa"
[    34.889] (II) LoadModule: "exa"
[    34.889] (II) Loading /usr/lib/xorg/modules/libexa.so
[    34.894] (II) Module exa: vendor="X.Org Foundation"
[    34.894] compiled for 1.20.8, module version = 2.6.0
[    34.894] ABI class: X.Org Video Driver, version 24.1
[    35.200] (II) VIVANTE(0): printing discovered frame buffer 'fb0' supported modes:
[    35.202] (II) VIVANTE(0): Modeline "U:1280x800p-59"x0.0   71.10  1280 1320 1400 1440  800 803 813 823 -hsync -vsync -csync (49.4 kHz eP)
[    35.236] (II) VIVANTE(0): Output DISP3 BG has no monitor section
[    35.237] (II) VIVANTE(0): Printing probed modes for output DISP3 BG
[    35.237] (II) VIVANTE(0): Modeline "U:1280x800p-59"x60.0   71.10  1280 1320 1400 1440  800 803 813 823 -hsync -vsync -csync (49.4 kHz eP)
[    35.238] (II) VIVANTE(0): Output DISP3 BG connected
[    35.238] (II) VIVANTE(0): Using exact sizes for initial modes
[    35.239] (II) VIVANTE(0): Output DISP3 BG using initial mode U:1280x800p-59 +0+0
[    35.239] (II) VIVANTE(0): imxDisplayPreInit: virtual set 1280 x 800, display width 0
[    35.239] (II) VIVANTE(0): VivPreInit: adjust display width 1280
[    35.321] (II) VIVANTE(0): reserve 8355840 bytes for on screen frame buffer; total fb memory size 16721920 bytes; offset of shadow buffer 8355840
[    35.414] (II) VIVANTE(0): hardware: DISP3 BG (video memory: 16330kB)
[    35.472] (II) VIVANTE(0): FB Start = 0xb55c4000  FB Base = 0xb55c4000  FB Offset = (nil)
[    35.484] (II) VIVANTE(0): test Initializing EXA
[    35.606] (II) EXA(0): Driver allocated offscreen pixmaps
[    35.607] (II) EXA(0): Driver registered support for the following operations:
[    35.607] (II)         Solid
[    35.607] (II)         Copy
[    35.607] (II)         Composite (RENDER acceleration)
[    35.607] (II)         UploadToScreen
[    35.609] (==) VIVANTE(0): Backing store enabled
[    35.627] (==) VIVANTE(0): DPMS enabled
[    35.704] (EE) VIVANTE(0): [dri] VivDRIScreenInit failed because Drm can't be opened.
[    35.705] (II) Initializing extension Generic Event Extension
[    35.708] (II) Initializing extension SHAPE
[    35.709] (II) Initializing extension MIT-SHM
[    35.709] (II) Initializing extension XInputExtension
[    35.713] (II) Initializing extension XTEST
[    35.715] (II) Initializing extension BIG-REQUESTS
[    35.715] (II) Initializing extension SYNC
[    35.718] (II) Initializing extension XKEYBOARD
[    35.721] (II) Initializing extension XC-MISC
[    35.721] (II) Initializing extension XFIXES
[    35.722] (II) Initializing extension RENDER
[    35.724] (II) Initializing extension RANDR
[    35.724] (II) Initializing extension COMPOSITE
[    35.726] (II) Initializing extension DAMAGE
[    35.728] (II) Initializing extension MIT-SCREEN-SAVER
[    35.728] (II) Initializing extension DOUBLE-BUFFER
[    35.729] (II) Initializing extension DPMS
[    35.729] (II) Initializing extension Present
[    35.730] (II) Initializing extension DRI3
[    35.732] (II) Initializing extension X-Resource
[    35.732] (II) Initializing extension XVideo
[    35.733] (II) Initializing extension XVideo-MotionCompensation
[    35.734] (II) Initializing extension GLX
[    35.752] (II) AIGLX: Screen 0 is not DRI2 capable
[    36.443] (II) IGLX: Loaded and initialized swrast
[    36.444] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    36.444] (II) Initializing extension XFree86-VidModeExtension
[    36.445] (II) Initializing extension XFree86-DGA
[    36.445] (II) Initializing extension XFree86-DRI
[    36.447] (II) Initializing extension DRI2
[    36.447] (II) Initializing extension vivext
[    36.450] (II) VIVANTE(0): Setting screen physical size to 338 x 211

If I run a simple gst-pipeline, it gets a SIGSEGV fault.
root@imx6qtelevic_generic:/lib/modules# DISPLAY=:0 gst-launch-1.0 videotestsrc ! imxeglvivsink
Setting pipeline to PAUSED ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLING ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Caught SIGSEGV
#0  0x76bdebe4 in ?? () from /lib/libc.so.6
#1  0x76c57744 in poll () from /lib/libc.so.6
#2  0x76d66bfa in ?? () from /usr/lib/libglib-2.0.so.0
Spinning.  Please run 'gdb gst-launch-1.0 694' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:03:45.501871360
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Am I lacking something? Anyone else with similar issues?


Re: [IMX8MM][L5.4.24] dhcp error bind do_configure

BELHADJ SALEM Talel
 

It is a long file :

DEBUG: Executing shell function autotools_preconfigure
DEBUG: Shell function autotools_preconfigure finished
DEBUG: Executing python function autotools_aclocals
DEBUG: SITE files ['endian-little', 'bit-64', 'arm-common', 'arm-64', 'common-linux', 'common-glibc', 'aarch64-linux', 'common']
DEBUG: Python function autotools_aclocals finished
DEBUG: Executing shell function do_configure
automake (GNU automake) 1.16.1
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <https://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by Tom Tromey <tromey@...>
       and Alexandre Duret-Lutz <adl@...>.
AUTOV is 1.16
NOTE: Executing ACLOCAL="aclocal --system-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aclocal/ --automake-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal-1.16" autoreconf -Wcross --verbose --install --force --exclude=autopoint -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal --system-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aclocal/ --automake-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal-1.16 -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4626: warning: underquoted definition of NOM_PATH_FILE
configure.in:4626:   run info Automake 'Extending aclocal'
configure.in:4626:   or see https://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
configure.in:11: warning: prefer named diversions
configure.in:11: warning: prefer named diversions
autoreconf: configure.in: tracing
configure.in:11: warning: prefer named diversions
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'libtool.m4'.
libtoolize: copying file 'libtool.m4/libtool.m4'
libtoolize: copying file 'libtool.m4/ltoptions.m4'
libtoolize: copying file 'libtool.m4/ltsugar.m4'
libtoolize: copying file 'libtool.m4/ltversion.m4'
libtoolize: copying file 'libtool.m4/lt~obsolete.m4'
libtoolize: Consider adding '-I libtool.m4' to ACLOCAL_AMFLAGS in Makefile.am.
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4626: warning: underquoted definition of NOM_PATH_FILE
configure.in:4626:   run info Automake 'Extending aclocal'
configure.in:4626:   or see https://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
configure.in:11: warning: prefer named diversions
configure.in:11: warning: prefer named diversions
autoreconf: running: /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/bin/autoconf --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
configure.in:11: warning: prefer named diversions
autoreconf: running: /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/bin/autoheader --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:         [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure.in:11: warning: prefer named diversions
autoreconf: configure.in: not using Automake
autoreconf: running: gnu-configize
configure.in:11: warning: prefer named diversions
autoreconf: Leaving directory `.'
NOTE: Running ../bind-9.11.5-P4/configure  --build=x86_64-linux           --host=aarch64-poky-linux           --target=aarch64-poky-linux           --prefix=/usr           --exec_prefix=/usr           --bindir=/usr/bin           --sbindir=/usr/sbin           --libexecdir=/usr/libexec           --datadir=/usr/share           --sysconfdir=/etc           --sharedstatedir=/com           --localstatedir=/var           --libdir=/usr/lib           --includedir=/usr/include           --oldincludedir=/usr/include           --infodir=/usr/share/info           --mandir=/usr/share/man           --disable-silent-rules           --disable-dependency-tracking           --with-libtool-sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  --enable-ipv6=yes --with-libtool --enable-threads                  --disable-devpoll --enable-epoll --with-gost=no                  --with-gssapi=no --with-ecdsa=yes --with-eddsa=no                  --with-lmdb=no                  --sysconfdir=/etc/bind                  --with-openssl=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr                 --disable-static  --without-libxml2  --without-python --with-readline=-lreadline --with-randomdev=/dev/random
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-dependency-tracking
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/endian-little
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/arm-common
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/arm-64
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common-linux
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common-glibc
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common
configure: loading site script /media/talel/data/menzu-zeus/sources/meta-openembedded/meta-gnome/site/arm-64
configure: loading site script /media/talel/data/menzu-zeus/sources/meta-openembedded/meta-networking/site/endian-little
configure: loading site script /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aarch64-poky-linux_config_site.d/ncurses_config
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-poky-linux-gnu
checking whether make sets $(MAKE)... yes
checking how to print strings... printf
checking for aarch64-poky-linux-gcc... aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot accepts -g... yes
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C89... none needed
checking for a sed that does not truncate output... (cached) sed
checking for grep that handles long lines and -e... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep
checking for egrep... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep -E
checking for fgrep... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep -F
checking for ld used by aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot... aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking if the linker (aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot ) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... aarch64-poky-linux-nm
checking the name lister (aarch64-poky-linux-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to aarch64-poky-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  option to reload object files... -r
checking for aarch64-poky-linux-objdump... aarch64-poky-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for aarch64-poky-linux-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for aarch64-poky-linux-ar... aarch64-poky-linux-gcc-ar
checking for archiver @FILE support... @
checking for aarch64-poky-linux-strip... aarch64-poky-linux-strip
checking for aarch64-poky-linux-ranlib... aarch64-poky-linux-gcc-ranlib
checking for gawk... gawk
checking command to parse aarch64-poky-linux-nm output from aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot object... ok
checking for sysroot... /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking for a working dd... /media/talel/data/menzu-zeus/gw/tmp/hosttools/dd
checking how to truncate binary pipes... /media/talel/data/menzu-zeus/gw/tmp/hosttools/dd bs=4096 count=1
checking for aarch64-poky-linux-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... aarch64-poky-linux-gcc -E --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -fno-rtti -fno-exceptions... no
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to produce PIC... -fPIC -DPIC
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot PIC flag -fPIC -DPIC works... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot static flag -static works... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -c -o file.o... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -c -o file.o... (cached) yes
checking whether the aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot linker (aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot ) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for a BSD-compatible install... /media/talel/data/menzu-zeus/gw/tmp/hosttools/install -c
checking whether ln -s works... yes
checking for getrandom... yes
checking for ar... /media/talel/data/menzu-zeus/gw/tmp/hosttools/ar
checking for etags... no
checking for emacs-etags... no
checking for perl5... no
checking for perl... /media/talel/data/menzu-zeus/gw/tmp/hosttools/perl
checking for python support... disabled
checking for aarch64-poky-linux-gcc... (cached) aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking whether we are using the GNU C compiler... (cached) yes
checking whether aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot accepts -g... (cached) yes
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C89... (cached) none needed
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C99... none needed
checking for ANSI C header files... (cached) yes
checking for fcntl.h... yes
checking for regex.h... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/mman.h... yes
checking for sys/sockio.h... no
checking for sys/select.h... yes
checking for sys/param.h... yes
checking for sys/sysctl.h... yes
checking for net/if6.h... no
checking for sys/socket.h... yes
checking for net/route.h... yes
checking for linux/netlink.h... yes
checking for linux/rtnetlink.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for working volatile... yes
checking for sysctlbyname... no
checking for flexible array members... yes
checking for mmap... yes
checking for seteuid... yes
checking for setresuid... (cached) yes
checking for setegid... yes
checking for setresgid... yes
checking for ftello... yes
checking for fseeko... yes
checking for static inline breakage... no
checking for size_t... yes
checking for ssize_t... yes
checking for uintptr_t... yes
checking for socklen_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for long long... yes
checking for uname... yes
checking for GCC noreturn attribute... yes
checking for struct lifconf... no
checking for kqueue... no
checking if unistd.h or sys/types.h defines fd_set... yes
checking whether byte ordering is bigendian... (cached) no
checking for GeoIP support... disabled
checking for GSSAPI library... disabled
checking for random device... using "/dev/random"
checking for arc4random... no
checking for arc4random_stir... no
checking for arc4random_addrandom... no
checking whether to build with thread support... yes
checking for pthread_create in -lpthread... yes
checking for sigwait... yes
checking for pthread_attr_getstacksize... yes
checking for pthread_attr_setstacksize... yes
checking for PTHREAD_MUTEX_ADAPTIVE_NP... using adaptive lock type
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sched_yield... yes
checking for pthread_yield... yes
checking for pthread_yield_np... no
checking for pthread_setname_np... yes
checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for sysconf... yes
checking for libtool... yes
checking for OpenSSL library... using OpenSSL from /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/lib and /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/include
checking whether linking with OpenSSL works... assuming it does work on target platform
checking whether linking with OpenSSL requires -ldl... no
checking for OpenSSL FIPS mode support... yes
checking for OpenSSL DSA support... yes
checking for EVP_sha256... yes
checking for EVP_sha384... yes
checking for EVP_sha512... yes
checking for DH_get0_key... yes
checking for ECDSA_SIG_get0... yes
checking for RSA_set0_key... yes
checking for DSA_get0_pqg... yes
checking for OpenSSL ECDSA support... using --with-ecdsa
checking for OpenSSL GOST support... using --with-gost
checking for OpenSSL Ed25519 support... using --with-eddsa
checking for OpenSSL AES support... using --with-aes
checking for the Algorithm for Client Cookie... aes
checking for using OpenSSL for hash functions... no
checking for PKCS11 support... no
checking for PKCS11 tools... disabled
checking for native PKCS11... disabled
checking for clock_gettime... yes
checking for lmdb library... no
checking for libxml2 library... no
checking for json library... no
checking for zlib library... yes
checking for library containing deflate... -lz
checking for smf_enable_instance in -lscf... no
checking for flockfile... yes
checking for getc_unlocked... yes
checking whether to build with threads... yes
checking if "aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot" supports -fno-strict-aliasing... no
checking if "aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot" supports -fno-delete-null-pointer-checks... no
checking for catgets... yes
checking whether to use purify... no
checking whether to use gperftools profiler... no
configure: WARNING: Internal symbol table does not work with libtool.  Disabling symbol table.
checking for IPv6 structures... yes
checking for Kame IPv6 support... no
checking for in6_addr... yes
checking for in6addr_any... yes
checking for in6addr_loopback... yes
checking for sin6_scope_id in struct sockaddr_in6... yes
checking for in6_pktinfo... yes
checking for struct sockaddr_storage... yes
checking for struct if_laddrreq... no
checking for struct if_laddrconf... no
checking for inet_ntop with IPv6 support... assuming inet_ntop not needed
checking for working inet_pton with IPv6 support... assuming inet_pton needed
checking for sa_len in struct sockaddr... no
checking for struct msghdr flavor... 4.4BSD
checking for type in_port_t... yes
checking for TCP_FASTOPEN socket option... yes
checking for struct addrinfo... yes
checking for struct rrsetinfo... no
checking for int sethostent... no
checking for int endhostent... no
checking for getnetbyaddr(in_addr_t, ...)... yes
checking for int setnetent... no
checking for int endnetent... no
checking for gethostbyaddr(const void *, size_t, ...)... no
checking for h_errno in netdb.h... yes
checking for getnameinfo prototype definitions... not match any subspecies; assume standard definition
checking for gai_strerror prototype definitions... not match any subspecies; assume standard definition
checking for getipnodebyname... no
checking for getnameinfo... yes
checking for getaddrinfo... (cached) yes
checking for gai_strerror... yes
checking for getifaddrs... yes
checking for interface list sysctl... no
checking for correctly declared strsep()... yes
checking for memmove... yes
checking for strtoul... yes
checking for strlcpy... no
checking for strlcat... no
checking for strcasestr... yes
configure: checking for readline with -lreadline
checking for readline... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking readline/history.h usability... yes
checking readline/history.h presence... yes
checking for readline/history.h... yes
checking sprintf return type... int
checking for vsnprintf... yes
checking printf for %z support... assuming target platform supports %z
checking for strerror... (cached) yes
checking for chroot... yes
checking linux/types.h usability... yes
checking linux/types.h presence... yes
checking for linux/types.h... yes
checking sys/capability.h usability... yes
checking sys/capability.h presence... yes
checking for sys/capability.h... yes
checking for linux/capability.h... yes
checking for cap_set_proc in -lcap... yes
checking sys/prctl.h usability... yes
checking sys/prctl.h presence... yes
checking for sys/prctl.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking for tzset... yes
checking for optarg declaration... yes
checking st_mtim.tv_nsec... yes
checking for type rlim_t... yes
checking for strings.h... (cached) yes
checking for if_nametoindex... yes
checking for nanosleep... yes
checking for usleep... yes
checking for explicit_bzero... yes
checking for usable stdatomic.h... yes
checking if -latomic is needed to use 64-bit stdatomic.h primitives... no
checking architecture type for atomic operations... noatomic
checking compiler support for __builtin_expect... yes
checking compiler support for __builtin_clz... yes
checking for latex... no
checking for pdflatex... no
checking for dblatex... no
checking for w3m... no
checking for pandoc... pandoc
checking for xsltproc... xsltproc
checking for xmllint... xmllint
checking for doxygen... doxygen
checking for curl... curl
checking for Docbook-XSL path... auto
checking for html/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/docbook.xsl
checking for xhtml/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/docbook.xsl
checking for manpages/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl
checking for html/chunk.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/chunk.xsl
checking for xhtml/chunk.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/chunk.xsl
checking for html/chunktoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/chunktoc.xsl
checking for xhtml/chunktoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/chunktoc.xsl
checking for html/maketoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/maketoc.xsl
checking for xhtml/maketoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/maketoc.xsl
checking for xsl/docbook.xsl... "not found"
checking for xsl/latex_book_fast.xsl... "not found"
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for setlocale... yes
using default tuning
checking whether to enable query trace logging... no
checking for dlopen in -ldl... yes
checking for dlopen... yes
checking for dlclose... yes
checking for dlsym... yes
checking for Postgres DLZ driver... no
checking for MySQL DLZ driver... no
checking for Berkeley DB DLZ driver...... no
checking for file system DLZ driver... no
checking for LDAP DLZ driver... no
checking for ODBC DLZ driver... no
checking for stub DLZ driver... no
checking contributed DLZ drivers... no
configure: creating ./config.status
config.status: creating make/rules
config.status: creating make/includes
config.status: creating make/Makefile
config.status: creating make/mkdep
config.status: creating Makefile
config.status: creating bin/Makefile
config.status: creating bin/check/Makefile
config.status: creating bin/confgen/Makefile
config.status: creating bin/confgen/unix/Makefile
config.status: creating bin/delv/Makefile
config.status: creating bin/dig/Makefile
config.status: creating bin/dnssec/Makefile
config.status: creating bin/named/Makefile
config.status: creating bin/named/unix/Makefile
config.status: creating bin/nsupdate/Makefile
config.status: creating bin/pkcs11/Makefile
config.status: creating bin/python/Makefile
config.status: creating bin/python/isc/Makefile
config.status: creating bin/python/isc/utils.py
config.status: creating bin/python/isc/tests/Makefile
config.status: creating bin/python/dnssec-checkds.py
config.status: creating bin/python/dnssec-coverage.py
config.status: creating bin/python/dnssec-keymgr.py
config.status: creating bin/python/isc/__init__.py
config.status: creating bin/python/isc/checkds.py
config.status: creating bin/python/isc/coverage.py
config.status: creating bin/python/isc/dnskey.py
config.status: creating bin/python/isc/eventlist.py
config.status: creating bin/python/isc/keydict.py
config.status: creating bin/python/isc/keyevent.py
config.status: creating bin/python/isc/keymgr.py
config.status: creating bin/python/isc/keyseries.py
config.status: creating bin/python/isc/keyzone.py
config.status: creating bin/python/isc/policy.py
config.status: creating bin/python/isc/rndc.py
config.status: creating bin/python/isc/tests/dnskey_test.py
config.status: creating bin/python/isc/tests/policy_test.py
config.status: creating bin/rndc/Makefile
config.status: creating bin/tests/Makefile
config.status: creating bin/tests/headerdep_test.sh
config.status: creating bin/tests/optional/Makefile
config.status: creating bin/tests/pkcs11/Makefile
config.status: creating bin/tests/pkcs11/benchmarks/Makefile
config.status: creating bin/tests/system/Makefile
config.status: creating bin/tests/system/conf.sh
config.status: creating bin/tests/system/dlz/prereq.sh
config.status: creating bin/tests/system/dlzexternal/Makefile
config.status: creating bin/tests/system/dlzexternal/ns1/dlzs.conf
config.status: creating bin/tests/system/dyndb/Makefile
config.status: creating bin/tests/system/dyndb/driver/Makefile
config.status: creating bin/tests/system/inline/checkdsa.sh
config.status: creating bin/tests/system/lwresd/Makefile
config.status: creating bin/tests/system/pipelined/Makefile
config.status: creating bin/tests/system/rndc/Makefile
config.status: creating bin/tests/system/rsabigexponent/Makefile
config.status: creating bin/tests/system/tkey/Makefile
config.status: creating bin/tests/virtual-time/Makefile
config.status: creating bin/tests/virtual-time/conf.sh
config.status: creating bin/tools/Makefile
config.status: creating contrib/scripts/check-secure-delegation.pl
config.status: creating contrib/scripts/zone-edit.sh
config.status: creating doc/Makefile
config.status: creating doc/arm/Makefile
config.status: creating doc/arm/noteversion.xml
config.status: creating doc/arm/pkgversion.xml
config.status: creating doc/arm/releaseinfo.xml
config.status: creating doc/doxygen/Doxyfile
config.status: creating doc/doxygen/Makefile
config.status: creating doc/doxygen/doxygen-input-filter
config.status: creating doc/misc/Makefile
config.status: creating doc/tex/Makefile
config.status: creating doc/tex/armstyle.sty
config.status: creating doc/xsl/Makefile
config.status: creating doc/xsl/isc-docbook-chunk.xsl
config.status: creating doc/xsl/isc-docbook-html.xsl
config.status: creating doc/xsl/isc-manpage.xsl
config.status: creating doc/xsl/isc-notes-html.xsl
config.status: creating isc-config.sh
config.status: creating lib/Makefile
config.status: creating lib/bind9/Makefile
config.status: creating lib/bind9/include/Makefile
config.status: creating lib/bind9/include/bind9/Makefile
config.status: creating lib/dns/Makefile
config.status: creating lib/dns/include/Makefile
config.status: creating lib/dns/include/dns/Makefile
config.status: creating lib/dns/include/dst/Makefile
config.status: creating lib/dns/tests/Makefile
config.status: creating lib/irs/Makefile
config.status: creating lib/irs/include/Makefile
config.status: creating lib/irs/include/irs/Makefile
config.status: creating lib/irs/include/irs/netdb.h
config.status: creating lib/irs/include/irs/platform.h
config.status: creating lib/irs/tests/Makefile
config.status: creating lib/isc/noatomic/Makefile
config.status: creating lib/isc/noatomic/include/Makefile
config.status: creating lib/isc/noatomic/include/isc/Makefile
config.status: creating lib/isc/pthreads/Makefile
config.status: creating lib/isc/pthreads/include/Makefile
config.status: creating lib/isc/pthreads/include/isc/Makefile
config.status: creating lib/isc/Makefile
config.status: creating lib/isc/include/Makefile
config.status: creating lib/isc/include/isc/Makefile
config.status: creating lib/isc/include/isc/platform.h
config.status: creating lib/isc/include/pk11/Makefile
config.status: creating lib/isc/include/pkcs11/Makefile
config.status: creating lib/isc/tests/Makefile
config.status: creating lib/isc/nls/Makefile
config.status: creating lib/isc/unix/Makefile
config.status: creating lib/isc/unix/include/Makefile
config.status: creating lib/isc/unix/include/isc/Makefile
config.status: creating lib/isc/unix/include/pkcs11/Makefile
config.status: creating lib/isccc/Makefile
config.status: creating lib/isccc/include/Makefile
config.status: creating lib/isccc/include/isccc/Makefile
config.status: creating lib/isccfg/Makefile
config.status: creating lib/isccfg/include/Makefile
config.status: creating lib/isccfg/include/isccfg/Makefile
config.status: creating lib/isccfg/tests/Makefile
config.status: creating lib/lwres/Makefile
config.status: creating lib/lwres/include/Makefile
config.status: creating lib/lwres/include/lwres/Makefile
config.status: creating lib/lwres/include/lwres/netdb.h
config.status: creating lib/lwres/include/lwres/platform.h
config.status: creating lib/lwres/man/Makefile
config.status: creating lib/lwres/tests/Makefile
config.status: creating lib/lwres/unix/Makefile
config.status: creating lib/lwres/unix/include/Makefile
config.status: creating lib/lwres/unix/include/lwres/Makefile
config.status: creating lib/samples/Makefile
config.status: creating lib/samples/Makefile-postinstall
config.status: creating unit/Makefile
config.status: creating unit/unittest.sh
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing libtool commands
config.status: executing chmod commands
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-dependency-tracking
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -rf ./atf
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisc.la libisc-nosymtbl.la libisc.la \
libisc-nosymtbl.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisccc.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libdns.la timestamp
rm -f gen code.h include/dns/enumtype.h include/dns/enumclass.h
rm -f include/dns/rdatastruct.h
rm -f dnstap.pb-c.c dnstap.pb-c.h include/dns/dnstap.pb-c.h
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisccfg.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libbind9.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f timestamp
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f liblwres.la liblwres.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libirs.la libirs.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f resolve sample-async sample-gai sample-update sample-request nsprobe
rm -f sample.key
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f named lwresd builtin.lo client.lo config.lo control.lo controlconf.lo fuzz.lo  interfacemgr.lo listenlist.lo log.lo logconf.lo main.lo notify.lo query.lo server.lo sortlist.lo statschannel.lo tkeyconf.lo tsigconf.lo update.lo xfrout.lo zoneconf.lo lwaddr.lo lwresd.lo lwdclient.lo lwderror.lo lwdgabn.lo lwdgnba.lo lwdgrbn.lo lwdnoop.lo lwsearch.lo  
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f rndc
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f dig host nslookup
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f delv
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f dnssec-keygen dnssec-signzone dnssec-keyfromlabel dnssec-dsfromkey dnssec-revoke dnssec-settime dnssec-verify dnssec-importkey
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f arpaname named-journalprint named-rrchecker  nsec3hash genrandom isc-hmac-fixup mdig
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f nsupdate
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f named-checkconf named-checkzone r1.htm
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f rndc-confgen ddns-confgen tsig-keygen
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f driver.so
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f db.lo driver.lo instance.lo lock.lo log.lo syncptr.lo zone.lo sample.so lib/sample.so
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f lwtest
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f pipequeries
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f gencheck
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f bigkey
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f keycreate keydelete
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
if test -f ./cleanall.sh; then /bin/bash ./cleanall.sh; fi
rm -f systests.output
rm -f random.data
rm -f parallel.mk
rm -f feature-test
rm -f feature-test.lo
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f driver.so
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f db.lo driver.lo instance.lo lock.lo log.lo syncptr.lo zone.lo sample.so lib/sample.so
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f lwtest
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f pipequeries
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f gencheck
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f bigkey
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f keycreate keydelete
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
if test -f ./cleanall.sh; then /bin/bash ./cleanall.sh; fi
rm -f systests.output
rm -f random.data
rm -f parallel.mk
rm -f feature-test
rm -f feature-test.lo
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f cfg_test makejournal wire_test
( cd optional; make clean)
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/optional'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f  adb_test byaddr_test backtrace_test backtrace_test_nosymtbl byname_test db_test dst_test entropy_test entropy2_test gsstest gxba_test gxbn_test hash_test fsaccess_test inter_test keyboard_test lex_test lfsr_test log_test lwres_test lwresconf_test master_test mempool_test name_test nsecify ratelimiter_test rbt_test rwlock_test serial_test shutdown_test sig0_test sock_test sym_test task_test timer_test zone_test
rm -f backtrace_test_symtbl.c
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/optional'
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f Bv9ARM.aux Bv9ARM.brf Bv9ARM.glo Bv9ARM.idx Bv9ARM.toc
rm -f Bv9ARM.log Bv9ARM.out
rm -f notes.aux notes.brf notes.glo notes.idx notes.toc
rm -f notes.log notes.out
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
===============================================================================
Configuration summary:
-------------------------------------------------------------------------------
Optional features enabled:
    Multiprocessing support (--enable-threads)
    ECDSA algorithm support (--with-ecdsa)
    Print backtrace on crash (--enable-backtrace)
    Use symbol table for backtrace, named only (--enable-symtable)
    Use GNU libtool (--with-libtool)
    Dynamically loadable zone (DLZ) drivers:
        None
-------------------------------------------------------------------------------
Features disabled or unavailable on this platform:
    Large-system tuning (--with-tuning)
    Allow 'dnstap' packet logging (--enable-dnstap)
    GeoIP access control (--with-geoip)
    GSS-API (--with-gssapi)
    Allow 'fixed' rrset-order (--enable-fixed-rrset)
    PKCS#11/Cryptoki support (--with-pkcs11)
    Native PKCS#11/Cryptoki support (--enable-native-pkcs11)
    GOST algorithm support (--with-gost)
    EDDSA algorithm support (--with-eddsa)
    Use libseccomp system call filtering (--enable-seccomp)
    Very verbose query trace logging (--enable-querytrace)
    Automated Testing Framework (--with-atf)
    Python tools (--with-python)
    XML statistics (--with-libxml2)
    JSON statistics (--with-libjson)
    LMDB database to store configuration for 'addzone' zones (--with-lmdb)
    IDN support (--with-libidn2)
-------------------------------------------------------------------------------
Configured paths:
    prefix: /usr
    sysconfdir: /etc/bind
    localstatedir: /var
-------------------------------------------------------------------------------
Compiler: aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
    aarch64-poky-linux-gcc (GCC) 9.2.0
    Copyright (C) 2019 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
Unrecognized options:
    --disable-silent-rules, --disable-dependency-tracking
-------------------------------------------------------------------------------
For more detail, use --enable-full-report.
===============================================================================
DEBUG: Shell function do_configure finished
DEBUG: Executing python function do_qa_configure
NOTE: Checking autotools environment for common misconfiguration
ERROR: QA Issue: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this. [configure-unsafe]
NOTE: Checking configure output for unrecognised options
ERROR: Fatal QA errors found, failing task.
DEBUG: Python function do_qa_configure finished


Re: [IMX8MM][L5.4.24] dhcp error bind do_configure

Andy Pont <andy.pont@...>
 

Talel wrote...

I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini
Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs : 
What does the log file /media/talel/data/menzu-zeus/menzu/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/temp/log.do_configure.20544 contain?

-Andy.



[IMX8MM][L5.4.24] dhcp error bind do_configure

BELHADJ SALEM Talel
 

Hi ,All,

I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini
Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs :

ERROR: bind-9.11.5-P4-r0 do_configure: QA Issue: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this. [configure-unsafe]
ERROR: bind-9.11.5-P4-r0 do_configure: Fatal QA errors found, failing task.
ERROR: Logfile of failure stored in: /media/talel/data/menzu-zeus/menzu/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/temp/log.do_configure.20544
ERROR: Task (/media/talel/data/menzu-zeus/sources/poky/meta/recipes-connectivity/bind/bind_9.11.5-P4.bb:do_configure) failed with exit code '1'

The version of dhcp is 4.4.1 , and bind is 9.11.5-P4

What is the problem ?

Thanks, Talel


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Otavio Salvador
 

Hello all,

Em qui., 8 de out. de 2020 às 06:10, Andrey Zhizhikin
<andrey.z@...> escreveu:
Please note: with this configuration you would get a kernel from NXP
(versioned 5.4.24). If you would like to utilize the NXP kernel with
latest stable patch level, you should switch
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx" to
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx-fslc"
For all i.MX8 the fslc distributions use the NXP BSP by default so
using 'fslc-wayland' should work just fine.

...
You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks
For products we, at O.S. Systems, have been using our OEL[1]
distribution as a baseline where we create the product specific one.

1. https://github.com/OSSystemsEmbeddedLinux/ossystems-embedded-linux-platform

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Brian,

On Tue, Oct 6, 2020 at 10:44 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 01:22 PM, Andrey Zhizhikin wrote:

Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???

I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.

When I did NXP released builds I would use fsl-wayland distro but if memory serves me right a core-image-minimal would not boot. Only core-image-base images did and they were quite large.
I just did a following build:
$ MACHINE=imx8mmevk DISTRO=fsl-wayland bitbake core-image-minimal

Image produced boots fine on i.MX8M Mini EVK.

Runtime device info:
# cat /etc/os-release
ID=fsl-wayland
NAME="FSL Wayland"
VERSION="3.2-snapshot-20201008 (master)"
VERSION_ID=3.2-snapshot-20201008
PRETTY_NAME="FSL Wayland 3.2-snapshot-20201008 (master)"

# uname -a
Linux imx8mmevk 5.4.24+gbabac008e5cf #1 SMP PREEMPT Sat May 30
07:25:46 UTC 2020 aarch64 GNU/Linux

Please note: with this configuration you would get a kernel from NXP
(versioned 5.4.24). If you would like to utilize the NXP kernel with
latest stable patch level, you should switch
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx" to
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx-fslc"


.
I do need to create my own distro but kind of would like to start from core-image-minimal and build up rather than take something like fsl-wayland and try to figure out what I don't need. Being new to NXP family this approach "feels" more logical.

Is poky what's causing my pain?

You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks

Regards,

Brian


--
Regards,
Andrey.


Re: [PATCH] imx-boot: add back LD_LIBRARY_PATH exporting

Ming Liu <liu.ming50@...>
 


Otavio Salvador <otavio.salvador@...> 於 2020年10月5日 週一 下午3:43寫道:

Em seg., 5 de out. de 2020 às 09:41, Ming Liu <liu.ming50@...> escreveu:
>
> From: Ming Liu <liu.ming50@...>
>
> It was dropped by commit 65100fad:
> [ imx-mkimage: upgrade to version 1.0 ]
>
> after that, the following error was observed again:
> | ./mkimage_uboot -E -p 0x3000 -f u-boot.its u-boot.itb
> | ./mkimage_uboot: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory
>
> Signed-off-by: Ming Liu <liu.ming50@...>

Please open a PR with it.


--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

On Tue, Oct 6, 2020 at 10:44 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 01:22 PM, Andrey Zhizhikin wrote:

Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???

I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.

When I did NXP released builds I would use fsl-wayland distro but if memory serves me right a core-image-minimal would not boot. Only core-image-base images did and they were quite large.

I do need to create my own distro but kind of would like to start from core-image-minimal and build up rather than take something like fsl-wayland and try to figure out what I don't need. Being new to NXP family this approach "feels" more logical.
I think you're mixing up 2 conceptual points here: distro vs image.
You can have a wayland distro, but only include a handful of packages
and features of it into the image. Distro does not define the content
of the image, image recipe does.

Section 4.3.2. of Yocto Overview Manual gives a very nice overview of
those concepts:
https://www.yoctoproject.org/docs/3.1.2/overview-manual/overview-manual.html#metadata-machine-configuration-and-policy-configuration


Is poky what's causing my pain?

You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks

Regards,

Brian


--
Regards,
Andrey.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Brian,

On Tue, Oct 6, 2020 at 10:58 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 12:42 PM, Brian Hutchinson wrote:



Smoking sstate & tmp and trying build again with:


IMAGE_INSTALL_append = " firmware-imx-sdma-imx7d firmware-imx-epdc"

So just finished the above cycle and flashed sdcard. Think we got somewhere this time!

I get only one instance of sdma error:

[ 0.117495] EINJ: ACPI disabled.
[ 0.126332] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.126346] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[ 0.134253] mxs-dma 33000000.dma-controller: initialized
[ 0.135378] Bus freq driver module loaded

... of note here is it didn't say it was using ROM version!!!!

And I have firmware package for sdma now:

root@imx8mmevk:~# rpm -qa | grep -i firmware
linux-firmware-ath10k-license-20200817-r0.noarch
firmware-qca9377-3.0.2-r0.noarch
firmware-imx-epdc-8.8-r0.noarch
linux-firmware-ath10k-20200817-r0.noarch
firmware-imx-sdma-imx7d-8.8-r0.noarch


root@imx8mmevk:/lib/firmware# ls -l
-rw-r--r-- 1 root root 2713 Mar 9 12:34 LICENSE.QualcommAtheros_ath10k
drwxr-xr-x 11 root root 1024 Mar 9 12:34 ath10k
drwxr-xr-x 4 root root 1024 Mar 9 12:34 imx
drwxr-xr-x 2 root root 1024 Mar 9 12:34 qca
drwxr-xr-x 2 root root 1024 Mar 9 12:34 qca9377
-rw-r--r-- 1 root root 3764 Mar 9 12:34 regulatory.db
-rw-r--r-- 1 root root 1182 Mar 9 12:34 regulatory.db.p7s
drwxr-xr-x 3 root root 1024 Mar 9 12:34 wlan

... and /lib/firmware/imx/sdma looks like:

root@imx8mmevk:/lib/firmware/imx/sdma# ls
sdma-imx7d.bin

So hopefully this helps with the ALSA issue I was chasing that led me to this sdma issue in the first place!

Thanks guys! I don't know why core-image-minimal isn't working ...
Well, this is I guess an expected behavior. firmware packages are
listed in MACHINE_EXTRA_RRECOMMENDS, which is (according to Yocto
Reference manual, link
https://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-MACHINE_EXTRA_RRECOMMENDS)
is only considered when packagegroup-base is installed in the image
and does not affect 'core-image-minimal' or 'core-image-full-cmdline'
images.

That is the reason that even if the package is added in the
imx-base.inc (like Otavio suggested in his patch) - you would not
receive it in core-image-minimal and you would have to install it
explicitly.

As for firmware packages themselves, I guess it should be changed from
MACHINE_EXTRA_RRECOMMENDS to MACHINE_EXTRA_RDEPENDS in order to bail
out at the build time rather than figure out that they are not present
on the device at boot time. But this is yet a separate point, which
actually would not solve your original issue as you either need an
image recipe which includes packagegroup-base or you have to
explicitly list them in IMAGE_INSTALL.

I see there is a firmware-imx-8m package so maybe I should add it.
This package is actually empty, and only serves as a deploy target to
provide Cadence HDMI FW for imx-boot to build a boot container. Even
if you try to install it - you would not receive any FW files on the
target.


Regards,

Brian




--
Regards,
Andrey.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

On Tue, Oct 6, 2020 at 04:15 PM, Fabio Estevam wrote:
On Tue, Oct 6, 2020 at 6:26 PM Brian Hutchinson <b.hutchman@...> wrote:

... noticed this in dmesg:

[ 4.003745] udevd[263]: starting eudev-3.2.9
[ 4.086853] imx-sdma 302b0000.dma-controller: loaded firmware 4.5
[ 4.354370] qca9377: loading out-of-tree module taints kernel.
[ 4.447875] qca9377: loading driver v4.5.24.4

... curious because I think 4.5 is ROM version ... 8.8 is version of binary in imx-sdma firmware package.
No, 4.5 is the external SDMA firmware version. This looks correct.
Ok, thanks!


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Fabio Estevam
 

On Tue, Oct 6, 2020 at 6:26 PM Brian Hutchinson <b.hutchman@...> wrote:

... noticed this in dmesg:

[ 4.003745] udevd[263]: starting eudev-3.2.9
[ 4.086853] imx-sdma 302b0000.dma-controller: loaded firmware 4.5
[ 4.354370] qca9377: loading out-of-tree module taints kernel.
[ 4.447875] qca9377: loading driver v4.5.24.4

... curious because I think 4.5 is ROM version ... 8.8 is version of binary in imx-sdma firmware package.
No, 4.5 is the external SDMA firmware version. This looks correct.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

... noticed this in dmesg:

[    4.003745] udevd[263]: starting eudev-3.2.9                                                                                            
[    4.086853] imx-sdma 302b0000.dma-controller: loaded firmware 4.5                       
[    4.354370] qca9377: loading out-of-tree module taints kernel.                                      
[    4.447875] qca9377: loading driver v4.5.24.4

... curious because I think 4.5 is ROM version ... 8.8 is version of binary in imx-sdma firmware package.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

On Tue, Oct 6, 2020 at 12:42 PM, Brian Hutchinson wrote:


Smoking sstate & tmp and trying build again with:


IMAGE_INSTALL_append = " firmware-imx-sdma-imx7d firmware-imx-epdc"
So just finished the above cycle and flashed sdcard.  Think we got somewhere this time!

I get only one instance of sdma error:

[    0.117495] EINJ: ACPI disabled.     
[    0.126332] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.126346] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[    0.134253] mxs-dma 33000000.dma-controller: initialized                     
[    0.135378] Bus freq driver module loaded

... of note here is it didn't say it was using ROM version!!!!

And I have firmware package for sdma now:

root@imx8mmevk:~# rpm -qa | grep -i firmware
linux-firmware-ath10k-license-20200817-r0.noarch
firmware-qca9377-3.0.2-r0.noarch
firmware-imx-epdc-8.8-r0.noarch
linux-firmware-ath10k-20200817-r0.noarch
firmware-imx-sdma-imx7d-8.8-r0.noarch


root@imx8mmevk:/lib/firmware# ls -l
-rw-r--r--    1 root     root          2713 Mar  9 12:34 LICENSE.QualcommAtheros_ath10k
drwxr-xr-x   11 root     root          1024 Mar  9 12:34 ath10k
drwxr-xr-x    4 root     root          1024 Mar  9 12:34 imx
drwxr-xr-x    2 root     root          1024 Mar  9 12:34 qca
drwxr-xr-x    2 root     root          1024 Mar  9 12:34 qca9377
-rw-r--r--    1 root     root          3764 Mar  9 12:34 regulatory.db
-rw-r--r--    1 root     root          1182 Mar  9 12:34 regulatory.db.p7s
drwxr-xr-x    3 root     root          1024 Mar  9 12:34 wlan

... and /lib/firmware/imx/sdma looks like:

root@imx8mmevk:/lib/firmware/imx/sdma# ls
sdma-imx7d.bin

So hopefully this helps with the ALSA issue I was chasing that led me to this sdma issue in the first place!

Thanks guys!  I don't know why core-image-minimal isn't working ... I see there is a
firmware-imx-8m package so maybe I should add it.

Regards,

Brian


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

On Tue, Oct 6, 2020 at 01:22 PM, Andrey Zhizhikin wrote:
Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:
... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???
I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.
When I did NXP released builds I would use fsl-wayland distro but if memory serves me right a core-image-minimal would not boot.  Only core-image-base images did and they were quite large.

I do need to create my own distro but kind of would like to start from core-image-minimal and build up rather than take something like fsl-wayland and try to figure out what I don't need.  Being new to NXP family this approach "feels" more logical.

Is poky what's causing my pain?
You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.
Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.
I'll look.   Thanks

Regards,

Brian


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

On Tue, Oct 6, 2020 at 01:28 PM, Andrey Zhizhikin wrote:
Mush Ryzen 9 3900x, mush!Brian,
Did you try Otavio's patch? Would be curious to know if that solved
the absence of SDMA FW package for you.
I did a repo sync before building.  Did I need to do something else?

Regards,

Brian


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Otavio / Brian,

On Tue, Oct 6, 2020 at 7:10 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 09:50 AM, Otavio Salvador wrote:

Hello Brian,

See if below change fixes it:
That should actually do the trick! I just realized that the mx8m is
completely missing the MACHINE_FIRMWARE definition. I'm starting to
wonder - was it actually ever defined for mx8m?

Let me try this out on the imx8mmevk, I'll get back on this one.


diff --git a/conf/machine/include/imx-base.inc
b/conf/machine/include/imx-base.inc
index 83e49969..db27bd84 100644
--- a/conf/machine/include/imx-base.inc
+++ b/conf/machine/include/imx-base.inc
@@ -231,6 +231,7 @@ MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53
firmware-imx-sdma-imx53"
MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51
firmware-imx-sdma-imx51"
+MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
MACHINE_FIRMWARE_append_mx8mp = " firmware-imx-easrc-imx8mn
firmware-imx-xcvr-imx8mp firmware-sof-imx"
MACHINE_FIRMWARE_append_use-mainline-bsp = "
linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d
firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"

So I did build of core-image-minimal with local.conf containing MACHINE_FIRMWARE = 'MACHINE_FIRMWARE_append_mx7d' and still got the sdma errors.

No firmware-imx packages were installed and no /lib/firmware directory created so I guess that explains why.

Now I'm off trying core-image-base. I'll comment out:

MACHINE_FIRMWARE = 'MACHINE_FIRMWARE_append_mx7d'

... and try that first.
Brian,
Did you try Otavio's patch? Would be curious to know if that solved
the absence of SDMA FW package for you.


Mush Ryzen 9 3900x, mush!



--
Regards,
Andrey.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???
I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.


Is poky what's causing my pain?
You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".


I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.
Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.


Regards,

Brian


--
Regards,
Andrey.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???

Is poky what's causing my pain?

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land.  I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Regards,

Brian


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

More background information in case it matters.

I did my original setup with:
EULA=1 MACHINE=imx8mmevk DISTRO=poky source setup-environment build

... because I don't want/need graphics etc.

After Otavio did his change, I smoked sstate and tmp dir and rebuilt core-image-base.  Still get sdma errors and do not have /lib/firmware/imx
/ binaries.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.4.69+gdd0d7d132f10 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Sat Oct 3 16:05:58 UTC 2020
[    0.000000] Machine model: FSL i.MX8MM LPDDR4 EVK RevB board
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 640 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbdbdd500-0xbdbdefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000b7ffffff]
[    0.000000]   node   0: [mem 0x00000000b8400000-0x00000000bdffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507008
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk1p2 rootwait rw
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1336512K/2060288K available (16316K kernel code, 1206K rwdata, 6432K rodata, 2816K init, 1012K bss, 68416K reserved, 655360K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[    0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[    0.000368] Console: colour dummy device 80x25
[    0.000433] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
[    0.000442] pid_max: default: 32768 minimum: 301
[    0.000509] LSM: Security Framework initializing
[    0.000561] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000572] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001725] ASID allocator initialised with 32768 entries
[    0.001795] rcu: Hierarchical SRCU implementation.
[    0.002674] EFI services will not be available.
[    0.002831] smp: Bringing up secondary CPUs ...
[    0.003207] Detected VIPT I-cache on CPU1
[    0.003231] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[    0.003264] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.003671] Detected VIPT I-cache on CPU2
[    0.003687] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[    0.003705] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.004125] Detected VIPT I-cache on CPU3
[    0.004140] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[    0.004156] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.004214] smp: Brought up 1 node, 4 CPUs
[    0.004223] SMP: Total of 4 processors activated.
[    0.004228] CPU features: detected: 32-bit EL0 Support
[    0.004235] CPU features: detected: CRC32 instructions
[    0.010798] CPU: All CPU(s) started at EL2
[    0.010819] alternatives: patching kernel code
[    0.012249] devtmpfs: initialized
[    0.018305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.018322] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.034567] pinctrl core: initialized pinctrl subsystem
[    0.035263] DMI not present or invalid.
[    0.035517] NET: Registered protocol family 16
[    0.042286] DMA: preallocated 256 KiB pool for atomic allocations
[    0.042316] audit: initializing netlink subsys (disabled)
[    0.042552] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.043412] cpuidle: using governor menu
[    0.043815] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.044603] Serial: AMBA PL011 UART driver
[    0.044661] imx mu driver is registered.
[    0.044680] imx rpmsg driver is registered.
[    0.050379] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[    0.070353] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.070364] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.070369] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.070374] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.071199] cryptd: max_cpu_qlen set to 1000
[    0.074285] ACPI: Interpreter disabled.
[    0.075173] iommu: Default domain type: Translated  
[    0.075315] vgaarb: loaded
[    0.075598] SCSI subsystem initialized
[    0.075917] usbcore: registered new interface driver usbfs
[    0.075954] usbcore: registered new interface driver hub
[    0.076005] usbcore: registered new device driver usb
[    0.077181] mc: Linux media interface: v0.10
[    0.077209] videodev: Linux video capture interface: v2.00
[    0.077270] pps_core: LinuxPPS API ver. 1 registered
[    0.077277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...>
[    0.077296] PTP clock support registered
[    0.077432] EDAC MC: Ver: 3.0.0
[    0.078162] No BMan portals available!
[    0.078367] QMan: Allocated lookup table at (____ptrval____), entry count 65537
[    0.078615] No QMan portals available!
[    0.078979] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
[    0.079371] FPGA manager framework
[    0.079452] Advanced Linux Sound Architecture Driver Initialized.
[    0.079850] Bluetooth: Core ver 2.22
[    0.079879] NET: Registered protocol family 31
[    0.079885] Bluetooth: HCI device and connection manager initialized
[    0.079893] Bluetooth: HCI socket layer initialized
[    0.079900] Bluetooth: L2CAP socket layer initialized
[    0.079912] Bluetooth: SCO socket layer initialized
[    0.080626] clocksource: Switched to clocksource arch_sys_counter
[    0.080789] VFS: Disk quotas dquot_6.6.0
[    0.080835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.080988] pnp: PnP ACPI: disabled
[    0.086347] thermal_sys: Registered thermal governor 'step_wise'
[    0.086351] thermal_sys: Registered thermal governor 'power_allocator'
[    0.086676] NET: Registered protocol family 2
[    0.087007] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.087037] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.087146] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.087372] TCP: Hash tables configured (established 16384 bind 16384)
[    0.087449] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.087490] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.087623] NET: Registered protocol family 1
[    0.087946] RPC: Registered named UNIX socket transport module.
[    0.087951] RPC: Registered udp transport module.
[    0.087955] RPC: Registered tcp transport module.
[    0.087958] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.088337] PCI: CLS 0 bytes, default 64
[    0.088994] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.089358] kvm [1]: IPA Size Limit: 40bits
[    0.089954] kvm [1]: GICv3: no GICV resource entry
[    0.089959] kvm [1]: disabling GICv2 emulation
[    0.089976] kvm [1]: GIC system register CPU interface enabled
[    0.090032] kvm [1]: vgic interrupt IRQ1
[    0.090122] kvm [1]: Hyp mode initialized successfully
[    0.092902] Initialise system trusted keyrings
[    0.093042] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.098758] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.099374] NFS: Registering the id_resolver key type
[    0.099397] Key type id_resolver registered
[    0.099401] Key type id_legacy registered
[    0.099411] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.099430] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
[    0.099769] 9p: Installing v9fs 9p2000 file system support
[    0.112940] Key type asymmetric registered
[    0.112947] Asymmetric key parser 'x509' registered
[    0.112979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.112985] io scheduler mq-deadline registered
[    0.112990] io scheduler kyber registered
[    0.117751] EINJ: ACPI disabled.
[    0.126468] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.126481] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[    0.134362] mxs-dma 33000000.dma-controller: initialized
[    0.135472] Bus freq driver module loaded
[    0.140617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.142776] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 39, base_baud = 5000000) is a IMX
[    0.143243] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 40, base_baud = 5000000) is a IMX
[    0.143605] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 41, base_baud = 1500000) is a IMX
[    1.128381] printk: console [ttymxc1] enabled
[    1.138932] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.145570] [drm] No driver support for vblank timestamp query.
[    1.151568] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)
[    1.161489] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200
[    1.169037] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi
[    1.177314] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -517
[    1.194256] loop: module loaded
[    1.199500] imx ahci driver is registered.
[    1.206634] spi-nor spi3.0: n25q256ax1 (32768 Kbytes)
[    1.218432] libphy: Fixed MDIO Bus: probed
[    1.223294] tun: Universal TUN/TAP device driver, 1.6
[    1.229100] thunder_xcv, ver 1.0
[    1.232361] thunder_bgx, ver 1.0
[    1.235627] nicpf, ver 1.0
[    1.239161] pps pps0: new PPS source ptp0
[    1.248463] libphy: fec_enet_mii_bus: probed
[    1.253886] fec 30be0000.ethernet eth0: registered PHC device 0
[    1.260422] Freescale FM module, FMD API version 21.1.0
[    1.265896] Freescale FM Ports module
[    1.269568] fsl_mac: fsl_mac: FSL FMan MAC API based driver
[    1.275292] fsl_dpa: FSL DPAA Ethernet driver
[    1.279787] fsl_advanced: FSL DPAA Advanced drivers:
[    1.284763] fsl_proxy: FSL DPAA Proxy initialization driver
[    1.290455] fsl_oh: FSL FMan Offline Parsing port driver
[    1.296651] hclge is initializing
[    1.299968] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.307197] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.312557] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.319613] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.325394] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.331232] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.337190] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.344157] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.349774] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.357608] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.363684] sky2: driver version 1.30
[    1.368253] VFIO - User Level meta-driver version: 0.3
[    1.375216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.381762] ehci-pci: EHCI PCI platform driver
[    1.386284] ehci-platform: EHCI generic platform driver
[    1.391705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.397908] ohci-pci: OHCI PCI platform driver
[    1.402387] ohci-platform: OHCI generic platform driver
[    1.408194] usbcore: registered new interface driver usb-storage
[    1.414276] usbcore: registered new interface driver usbserial_generic
[    1.420823] usbserial: USB Serial support registered for generic
[    1.426865] usbcore: registered new interface driver ftdi_sio
[    1.432649] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.439989] usbcore: registered new interface driver usb_serial_simple
[    1.446534] usbserial: USB Serial support registered for carelink
[    1.452651] usbserial: USB Serial support registered for zio
[    1.458331] usbserial: USB Serial support registered for funsoft
[    1.464358] usbserial: USB Serial support registered for flashloader
[    1.470730] usbserial: USB Serial support registered for google
[    1.476672] usbserial: USB Serial support registered for libtransistor
[    1.483220] usbserial: USB Serial support registered for vivopay
[    1.489247] usbserial: USB Serial support registered for moto_modem
[    1.495533] usbserial: USB Serial support registered for motorola_tetra
[    1.502167] usbserial: USB Serial support registered for novatel_gps
[    1.508543] usbserial: USB Serial support registered for hp4x
[    1.514315] usbserial: USB Serial support registered for suunto
[    1.520254] usbserial: USB Serial support registered for siemens_mpi
[    1.528117] imx_usb 32e40000.usb: No over current polarity defined
[    1.535658] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/soc@0:bus@30000000/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
[    1.550767] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
[    1.557054] i2c /dev entries driver
[    1.561214] mx6s-csi 32e20000.csi1_bridge: initialising
[    1.566961] mxc_mipi-csi 32e30000.mipi_csi: 32e30000.mipi_csi supply mipi-phy not found, using dummy regulator
[    1.577149] mxc_mipi-csi 32e30000.mipi_csi: mipi csi v4l2 device registered
[    1.584124] CSI: Registered sensor subdevice: mxc_mipi-csi.0
[    1.589804] mxc_mipi-csi 32e30000.mipi_csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000
[    1.603800] imx2-wdt 30280000.watchdog: timeout 60 sec (nowayout=0)
[    1.610393] Bluetooth: HCI UART driver ver 2.3
[    1.614849] Bluetooth: HCI UART protocol H4 registered
[    1.619998] Bluetooth: HCI UART protocol BCSP registered
[    1.625336] Bluetooth: HCI UART protocol LL registered
[    1.630482] Bluetooth: HCI UART protocol ATH3K registered
[    1.635904] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.642264] Bluetooth: HCI UART protocol Broadcom registered
[    1.647959] Bluetooth: HCI UART protocol QCA registered
[    1.655070] sdhci: Secure Digital Host Controller Interface driver
[    1.661270] sdhci: Copyright(c) Pierre Ossman
[    1.665827] Synopsys Designware Multimedia Card Interface Driver
[    1.672394] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.678834] mmc0: CQHCI version 5.10
[    1.682839] mmc1: CQHCI version 5.10
[    1.686888] mmc2: CQHCI version 5.10
[    1.722293] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[    1.732199] ledtrig-cpu: registered to indicate activity on CPUs
[    1.739408] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
[    1.746179] caam 30900000.crypto: job rings = 2, qi = 0
[    1.761269] caam algorithms registered in /proc/crypto
[    1.767138] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
[    1.776667] caam_jr 30901000.jr: registering rng-caam
[    1.785369] caam-snvs 30370000.caam-snvs: can't get snvs clock
[    1.791259] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state
[    1.799724] usbcore: registered new interface driver usbhid
[    1.805325] usbhid: USB HID core driver
[    1.811586] No fsl,qman node
[    1.814491] Freescale USDPAA process driver
[    1.818681] fsl-usdpaa: no region found
[    1.822541] Freescale USDPAA process IRQ driver
[    1.830895] optee: probing for conduit method from DT.
[    1.836068] optee: revision 3.7 (7a49776d)
[    1.837489] optee: dynamic shared memory is enabled
[    1.846654] optee: initialized driver
[    1.851776] hantrodec 0 : module inserted. Major = 236
[    1.857470] hantrodec 1 : module inserted. Major = 236
[    1.863548] hx280enc: module inserted. Major <235>
[    1.864030] mmc2: Command Queue Engine enabled
[    1.872286] wm8524-codec audio-codec: Failed to get mute line: -517
[    1.872849] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    1.886243] mmcblk2: mmc2:0001 DG4016 14.7 GiB  
[    1.890953] mmcblk2boot0: mmc2:0001 DG4016 partition 1 4.00 MiB
[    1.897036] mmcblk2boot1: mmc2:0001 DG4016 partition 2 4.00 MiB
[    1.903411] mmcblk2rpmb: mmc2:0001 DG4016 partition 3 4.00 MiB, chardev (237:0)
[    1.913593]  mmcblk2: p1
[    1.921448] fsl-micfil-dai 30080000.micfil: GET IRQ: 16
[    1.926699] fsl-micfil-dai 30080000.micfil: GET IRQ: 17
[    1.931944] fsl-micfil-dai 30080000.micfil: GET IRQ: 18
[    1.937188] fsl-micfil-dai 30080000.micfil: GET IRQ: 19
[    1.948366] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 30090000.spdif mapping ok
[    1.955987] imx-spdif sound-spdif: ASoC: no DMI vendor name!
[    1.964815] imx-ak4458 sound-ak4458: ASoC: failed to init link ak4458: -517
[    1.971795] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-517)
[    1.979181] debugfs: Directory '30080000.micfil' with parent 'imx-audio-micfil' already present!
[    1.988069] imx-micfil sound-micfil: snd-soc-dummy-dai <-> 30080000.micfil mapping ok
[    1.995911] imx-micfil sound-micfil: ASoC: no DMI vendor name!
[    2.003871] pktgen: Packet Generator for packet performance testing. Version: 2.75
[    2.014244] NET: Registered protocol family 26
[    2.019255] NET: Registered protocol family 10
[    2.024697] Segment Routing with IPv6
[    2.028405] NET: Registered protocol family 17
[    2.033320] Bluetooth: RFCOMM TTY layer initialized
[    2.038227] Bluetooth: RFCOMM socket layer initialized
[    2.043399] Bluetooth: RFCOMM ver 1.11
[    2.047158] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.052477] Bluetooth: BNEP filters: protocol multicast
[    2.057713] Bluetooth: BNEP socket layer initialized
[    2.062681] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.068607] Bluetooth: HIDP socket layer initialized
[    2.073614] 8021q: 802.1Q VLAN Support v1.8
[    2.077819] lib80211: common routines for IEEE802.11 drivers
[    2.083589] 9pnet: Installing 9P2000 support
[    2.087889] tsn generic netlink module v1 init...
[    2.092668] Key type dns_resolver registered
[    2.097910] registered taskstats version 1
[    2.102018] Loading compiled-in X.509 certificates
[    2.127804] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator
[    2.136638] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator
[    2.165134] ldo6: supplied by regulator-dummy
[    2.170280] i2c i2c-0: IMX I2C adapter registered
[    2.176191] adv7511 1-003d: 1-003d supply avdd not found, using dummy regulator
[    2.183567] adv7511 1-003d: 1-003d supply dvdd not found, using dummy regulator
[    2.190925] adv7511 1-003d: 1-003d supply pvdd not found, using dummy regulator
[    2.198292] adv7511 1-003d: 1-003d supply a2vdd not found, using dummy regulator
[    2.205727] adv7511 1-003d: 1-003d supply v3p3 not found, using dummy regulator
[    2.213081] adv7511 1-003d: 1-003d supply v1p2 not found, using dummy regulator
[    2.221229] adv7511 1-003d: Probe failed. Remote port 'mipi_dsi@32e10000' disabled
[    2.230679] i2c i2c-1: IMX I2C adapter registered
[    2.236516] pca953x 2-0020: using no AI
[    2.242710] ak4458 2-0010: Failed to request supplies: -517
[    2.248610] ak4458 2-0012: Failed to request supplies: -517
[    2.254460] ak5558 2-0013: Failed to request supplies: -517
[    2.260350] ak4458 2-0011: Failed to request supplies: -517
[    2.266248] ov5640_mipi 2-003c: No sensor reset pin available
[    2.272036] ov5640_mipi 2-003c: 2-003c supply DOVDD not found, using dummy regulator
[    2.279841] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator
[    2.287542] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator
[    2.308964] ov5640_mipi 2-003c: Read reg error: reg=300a
[    2.314286] ov5640_mipi 2-003c: Camera is not found
[    2.319331] i2c i2c-2: IMX I2C adapter registered
[    2.325397] imx6q-pcie 33800000.pcie: couldn't get pcie-phy
[    2.326092] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.331085] imx6q-pcie 33800000.pcie: 33800000.pcie supply epdev_on not found, using dummy regulator
[    2.337610] [drm] No driver support for vblank timestamp query.
[    2.337683] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)
[    2.347002] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:
[    2.353343] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200
[    2.361917] imx6q-pcie 33800000.pcie:    IO 0x1ff80000..0x1ff8ffff -> 0x00000000
[    2.369692] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi
[    2.376096] imx6q-pcie 33800000.pcie:   MEM 0x18000000..0x1fefffff -> 0x18000000
[    2.383494] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -19
[    2.391822] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!.
[    2.399165] imx-drm soc@0:bus@32c00000:display-subsystem: bound 32e10000.mipi_dsi (ops imx_sec_dsim_ops)
[    2.422395] [drm] Initialized imx-drm 1.0.0 20120507 for soc@0:bus@32c00000:display-subsystem on minor 0
[    2.432652] imx_usb 32e40000.usb: No over current polarity defined
[    2.438898] imx_usb 32e40000.usb: 32e40000.usb supply vbus not found, using dummy regulator
[    2.451562] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 3 mkt segment 0 supported-hw 0x8 0x1
[    2.464014] mmc0: CQHCI version 5.10
[    2.498241] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
[    2.506427] mmc1: CQHCI version 5.10
[    2.510077] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[    2.513014] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us.
[    2.517232] random: fast init done
[    2.549377] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[    2.559081] debugfs: Directory '30020000.sai' with parent 'bt-sco-audio' already present!
[    2.567413] asoc-simple-card sound-bt-sco: bt-sco-pcm <-> 30020000.sai mapping ok
[    2.574935] asoc-simple-card sound-bt-sco: ASoC: no DMI vendor name!
[    2.581348] debugfs: File 'Playback' in directory 'dapm' already present!
[    2.588166] debugfs: File 'Capture' in directory 'dapm' already present!
[    2.598070] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
[    2.603880] debugfs: Directory '30030000.sai' with parent 'wm8524-audio' already present!
[    2.612178] asoc-simple-card sound-wm8524: wm8524-hifi <-> 30030000.sai mapping ok
[    2.619789] asoc-simple-card sound-wm8524: ASoC: no DMI vendor name!
[    2.633267] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
[    2.638796] imx-ak4458 sound-ak4458: ASoC: failed to init link ak4458: -517
[    2.645785] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-517)
[    2.655165] OF: graph: no port node found in /soc@0/bus@30800000/i2c@30a30000/tcpc@50/connector
[    2.663891] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
[    2.669408] OF: graph: no port node found in /soc@0/bus@30800000/i2c@30a30000/tcpc@50/connector
[    2.678544] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
[    2.701006] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
[    2.706553] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
[    2.712091] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
[    2.717614] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    3.015739] ak4458 2-0010: ASoC: failed to probe component -6
[    3.021623] imx-ak4458 sound-ak4458: ASoC: failed to instantiate card -6
[    3.028417] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-6)
[    3.038629] input: bd718xx-pwrkey as /devices/platform/soc@0/soc@0:bus@30800000/30a20000.i2c/i2c-0/0-004b/gpio-keys.1.auto/input/input1
[    3.043169] mmc1: host does not support reading read-only switch, assuming write-enable
[    3.058841] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:01 UTC (1)
[    3.068482] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.080886] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.087650] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.094899] ALSA device list:
[    3.096288] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[    3.099252]   #0: imx-spdif
[    3.109793]   #1: imx-audio-micfil
[    3.113207]   #2: bt-sco-audio
[    3.116263]   #3: wm8524-audio
[    3.172648] mmc1: new ultra high speed DDR50 SDHC card at address e624
[    3.180412] mmcblk1: mmc1:e624 SU16G 14.8 GiB  
[    3.193719]  mmcblk1: p1 p2
[    3.522110] imx6q-pcie 33800000.pcie: Phy link never came up
[    3.527816] imx6q-pcie 33800000.pcie: failed to initialize host
[    3.533754] imx6q-pcie 33800000.pcie: unable to add pcie port.
[    3.558728] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.566939] VFS: Mounted root (ext4 filesystem) on device 179:98.
[    3.574615] devtmpfs: mounted
[    3.578627] Freeing unused kernel memory: 2816K
[    3.583228] Run /sbin/init as init process
INIT: version 2.96 booting
Framebuffer /dev/fb0 not detected
Boot splashscreen disabled
Starting udev
[    3.911810] udevd[262]: starting version 3.2.9
[    3.938426] random: udevd: uninitialized urandom read (16 bytes read)
[    3.945596] random: udevd: uninitialized urandom read (16 bytes read)
[    3.952954] random: udevd: uninitialized urandom read (16 bytes read)
[    3.983631] udevd[263]: starting eudev-3.2.9
[    4.061197] imx-sdma 302b0000.dma-controller: external firmware not found, using ROM firmware
[    4.061234] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware
[    4.079145] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    4.089778] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[    4.180707] imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware
[    4.333245] qca9377: loading out-of-tree module taints kernel.
[    4.431975] qca9377: loading driver v4.5.24.4
[    4.436739] hifDeviceInserted: Dumping clocks (50000000,400000000)
[    4.442993] AR6000: Set async interrupt delay clock as 2.
[    4.587585] AR6000: configuration opcode 3 is not used for Linux SDIO stack  
[    4.598653] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[    5.137761] HIF Interrupt processing is SYNC ONLY
[    5.142482] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
[    5.150865] AR6000: configuration opcode 5 is not used for Linux SDIO stack  
[    5.161235] +HWT
[    5.168929] -HWT
[    5.172024] MAILBOX SWAP Service is enabled!
[    5.176319] Reduced Tx Complete service is enabled!
[    5.183719] HTCConnectService, host indicate support b2b bundle
[    5.191627] HTCConnectService, firmware decide to disabled b2b bundle
[    5.198073] HTC Service:0x0300 ep:1 TX flow control disabled
[    5.204434] HTCConnectService, host indicate support b2b bundle
[    5.214381] HTCConnectService, firmware decide to disabled b2b bundle
[    5.236549] target uses HTT version 3.53; host uses 3.28
[    5.242007] Host SW:4.5.24.4, FW:0.0.0.23, HW:QCA93x7_REV1_1
[    5.247890] ol_pktlog_init: pktlogmod_init successfull
[    5.253155] ath_hif_sdio: HIF (Atheros/multi-bss)
[    5.257940] qca9377: driver loaded in 828000
[    5.298178] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[    5.707824] urandom_read: 4 callbacks suppressed
[    5.707831] random: dd: uninitialized urandom read (512 bytes read)
[    5.811537] Atheros 8031 ethernet 30be0000.ethernet-1:00: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[   11.417755] random: crng init done
umount: can't unmount /mnt/.psplash: No such file or directory

Poky (Yocto Project Reference Distro) 3.1.3 imx8mmevk /dev/ttymxc1

imx8mmevk login: root
root@imx8mmevk:~# rpm -qa | grep -i firmware
linux-firmware-ath10k-license-20200817-r0.noarch
firmware-qca9377-3.0.2-r0.noarch
linux-firmware-ath10k-20200817-r0.noarch
root@imx8mmevk:~# cd /lib/firmware/
LICENSE.QualcommAtheros_ath10k  ath10k/                         qca/                            qca9377/                        regulatory.db                   regulatory.db.p7s               wlan/

I noticed that my image size jumped form 329M to 621M so thought that was interesting.

Smoking sstate & tmp and trying build again with:


IMAGE_INSTALL_append = " firmware-imx-sdma-imx7d firmware-imx-epdc"


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Brian Hutchinson
 

On Tue, Oct 6, 2020 at 09:50 AM, Otavio Salvador wrote:
Hello Brian,

See if below change fixes it:

diff --git a/conf/machine/include/imx-base.inc
b/conf/machine/include/imx-base.inc
index 83e49969..db27bd84 100644
--- a/conf/machine/include/imx-base.inc
+++ b/conf/machine/include/imx-base.inc
@@ -231,6 +231,7 @@ MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53
firmware-imx-sdma-imx53"
MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51
firmware-imx-sdma-imx51"
+MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
MACHINE_FIRMWARE_append_mx8mp = " firmware-imx-easrc-imx8mn
firmware-imx-xcvr-imx8mp firmware-sof-imx"
MACHINE_FIRMWARE_append_use-mainline-bsp = "
linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d
firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"
So I did build of core-image-minimal with local.conf containing MACHINE_FIRMWARE = 'MACHINE_FIRMWARE_append_mx7d' and still got the sdma errors.

No firmware-imx packages were installed and no /lib/firmware directory created so I guess that explains why.

Now I'm off trying core-image-base.  I'll comment out:

MACHINE_FIRMWARE = 'MACHINE_FIRMWARE_append_mx7d'

... and try that first.

Mush Ryzen 9 3900x, mush!