Hi Thomas, Could you please use CST 3.3.1 instead? It is the latest one available at: https://www.nxp.com/webapp/Download?colCode=IMX_CST_TOOL_NEW

Hello, We have an onging PR for it; please try it out. Em sáb., 7 de ago. de 2021 às 04:09, Thomas Perrot <thomas.perrot@...> escreveu: -- Otavio Salvador O.S.

Em sáb., 7 de ago. de 2021 às 05:32, Thomas Perrot <thomas.perrot@...> escreveu: Please prepare a PR to github. -- Otavio Salvador O.S.

Signed-off-by: Thomas Perrot <thomas.perrot@...> --- .../recipes-devtools/cst/imx-cst_3.3.0.bb | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644

Signed-off-by: Thomas Perrot <thomas.perrot@...> --- classes/fsl-eula-unpack.bbclass | 4 +- classes/fsl-u-boot-localversion.bbclass | 2 +-

Hi Brian, Latest OP-TEE from NXP supports generating HUK for closed devices, so that should be all you need. You might need to configure the OP-TEE to enable RPMB, but that should be all you need to

On Thu, Jul 15, 2021 at 7:49 PM Brian Hutchinson via lists.yoctoproject.org <b.hutchman=gmail.com@...> wrote: Anyone? Anyone?

Hello Sam, On Thu, Jul 8, 2021 at 9:49 PM Andrey Zhizhikin via lists.yoctoproject.org <andrey.z=gmail.com@...> wrote: It took me quite a while, but I've submitted the PR

Hate to bring up an old thread again but I'm back to trying to pair down my image size and trying to use core-image-minimal and having issues with firmware-imx-sdma-imx7d & sdma-imx7d.bin If I just

It's been over a year now since I ran NXP's yocto release on imx8mm-evk but I believe that op-tee was included. I now find myself needing to use our eMMC RPMB for key storage since our TPM modules

As is, in the 5.12 upstream branch, RPM (specifically imx7D to M4) should just work? Amount of code in this area seems minimal compared to meta-freescale 5.4 releases. With most of the functionality

Does anyone know when meta-freescale plans on releasing a new version of their kernel (i.e.-imx)? Or where that information could be available? Thanks, Val

Hello Sam, This is on my TODO list, see https://github.com/Freescale/meta-freescale/pull/814 I'm pretty loaded now, but I'll see if I can bump up the version in recipes somewhen next week. Kernel

Hi, Currently on hardknott branch in meta-freescale, linux-fslc points to version 5.10.32. However latest 5.10 version in linux-fslc repo is 5.10.47. Would it be possible to update linux-fslc in

The driver for the sgtl5000 codec is sound/soc/codecs/sgtl5000.c: at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/sgtl5000.c?h=v5.13 You need to write a

Is there any need to update to a newer meta-freescale version with upgrade from 5.4 to 5.12 kernel. Thanks, Val From: Val Kondratenko Sent: Thursday, June 10, 2021 8:34 AM To:

.. resending, back to this, still seeing the error below. Does anyone have any ideas of why "Module.symvers" would not be present in my 5.12 build, and how to get it there (or at least avoid the

Hi guys I have changed my Linux kernel to 5.7 and eth0 works fine in first start. Rebooting can solve second eth problem. I find out the problem is in somewhere around

Dear FSLC Maintainers, NXP recently released tag lf-5.10.35-2.0.0 in branch lf-5.10.y of linux-imx repository. Is there any roadmap to introduce this kernel as a reference baseline for linux-fslc-imx

Dear colleagues, Does meta-freescale have the driver to control the SGTL5000 audio codec? If so, how do I set the pins that will be used on the raspberry pi and the clock of the fixed crystal I'm