meta-freescale@lists.yoctoproject.org

Re: [meta-qoriq][RESEND PATCH 1/2] lxc: Move to dynamic-layers

ping? Jun, it looks like you're maintaining this, can you please have a look? --Sean

By Sean Anderson · #24854 ·

Re: Yocto browser require low memory footprints #yocto #meta-freescale

I've used 'links' browser, which is very light-weight but also very minimal features. If your pre-rendered html is fairly simple, it might work out; probably worth taking a look at how some example

By S. Lockwood-Childs · #24853 ·

Re: Yocto browser require low memory footprints #yocto #meta-freescale

You might try WPEWebKit. I've used it before and it's good for a very minimal display of web content while still being fairly full featured. > >

By Joshua Watt · #24852 ·

Yocto browser require low memory footprints #yocto #meta-freescale

Hi , We are using Yocto Linux 3.0 zeus branch on imx6 based SOC. we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports. as of now we are using chromium

By yogeshbsa89@... · #24851 ·

Re: Comunity vs i.MX #yocto

Hello, Em qui., 23 de jun. de 2022 às 14:41, Константин Еременок <eremenok.k.by@...> escreveu: There was never a war. Both serves different goals. Lack of people to help

By Otavio Salvador · #24850 ·

Re: Comunity vs i.MX #yocto

Hello Konstantin, <eremenok.k.by@...> wrote: AFAIK, there was no war declared, not at least that I was aware of when I started using Yocto Project and `meta-freescale` layer. ;-) NXP is

By Andrey Zhizhikin · #24849 ·

Comunity vs i.MX #yocto

Hi there. I have not followed Yocto iMX for some time. Today I found in the document "i.MX Yocto Project User's Guide" from NXP such text: "i.MX joined the Yocto Project community providing a

By Константин Еременок · #24848 ·

imx8mq no hdmi when booted from SD card

Hi, I've tried on the NXP forum but the response was to try it on evk ;). I have a custom imx8mq baseboard. I'be using dunfell release of meta-freescale/ and image flashed using uuu to emmc have hdmi

By Marek Belisko · #24847 ·

Re: u-boot and devtool

Hi, Check if you have 'workspace/sources/u-boot-fslc/oe-workdir/u-boot-fslc-v2022.04+git999/<board-name>_defconfig/.config'. I think this is the .config used when enabled devtool for

By Peter Bergin · #24846 ·

Re: u-boot and devtool

Mauro, I am afraid I cannot help as I don't use it myself. I use it with toolchain for patching. Em sex., 17 de jun. de 2022 às 12:48, Mauro Ziliani <mauro@...> escreveu: -- Otavio Salvador

By Otavio Salvador · #24845 ·

u-boot and devtool

Hi all. I try to use devtool to make some patch for u-boot-fslc. When I make the menuconfig for u-boot-fslc where is placed the .config file? MZ

By Mauro Ziliani · #24844 ·

Re: imx51evk and u-boot

Sorry for my offtopic. I need to study better the schema Thanks for your time. MZ

By Mauro Ziliani · #24843 ·

Re: imx51evk and u-boot

Hi Mauro, [Please note that this is offtopic here] Yes, this is expected. You are using the U-Boot mx51evk target, but your board is a custom one. You said it has 1GB of RAM, so you need to adapt

By Fabio Estevam · #24842 ·

Re: imx51evk and u-boot

My boot stops here U-Boot 2020.04-mz-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000) CPU: i.MX51 rev3.0 at 800 MHz Reset cause: POR Model: Freescale i.MX51 Babbage

By Mauro Ziliani · #24841 ·

Re: imx51evk and u-boot

<otavio.salvador@...> wrote: imx51evk has 512MB of RAM. You need to adapt the DDR for your specific board to be able to boot it. Yes, it boots well with the top of tree U-Boot: U-Boot

By Fabio Estevam · #24840 ·

Re: imx51evk and u-boot

Em sáb., 11 de jun. de 2022 às 13:55, Mauro Ziliani <mauro@...> escreveu: u-boot-fslc It has been ages since I used those. @Fabio Estevam have you tried them lately? -- Otavio Salvador

By Otavio Salvador · #24839 ·

imx51evk and u-boot

Hi all. I'm trying to build Yocto dunfell for imx51evk derived board. The board has only sd card with 1 dram of ram. It is better u-boot-imx or u-boot-fslc as bootloader? I try the two version

By Mauro Ziliani · #24838 ·

restool: build error

Hi, all I built restool with new poky, but failed. The error is like the following. So, is there anybody can give me some suggestions? ---------------------------- | mc_v10/dprc.c: In function

By leimaohui · #24837 ·

libfdt_wrap.c:154:11: fatal error: Python.h: No such file or directory

Hi, I have backported the following recipes from honister to dunfell: - u-boot-fslc-common_2022.04.inc - u-boot-fslc_2022.04.bb u-boot-fslc and also my image that use the u-boot-fslc can be built

By Michael Glembotzki · #24836 ·

[PATCH] fmlib: set precise BSD license

From: Meng Li <meng.li@...> When building fmlib package based on Yocto 4.0, there is below warning reported WARNING: fmlib-git-r1 do_populate_lic: QA Issue: fmlib: No generic license file

By Meng Li <meng.li@...> · #24835 ·

Messages