|
Re: Yocto browser require low memory footprints
#yocto
#meta-freescale
You might try WPEWebKit. I've used it before and it's good for a very
minimal display of web content while still being fairly full featured.
>
>
You might try WPEWebKit. I've used it before and it's good for a very
minimal display of web content while still being fairly full featured.
>
>
|
By
Joshua Watt
·
#24852
·
|
|
Yocto browser require low memory footprints
#yocto
#meta-freescale
Hi ,
We are using Yocto Linux 3.0 zeus branch on imx6 based SOC.
we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports.
as of now we are using chromium
Hi ,
We are using Yocto Linux 3.0 zeus branch on imx6 based SOC.
we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports.
as of now we are using chromium
|
By
yogeshbsa89@...
·
#24851
·
|
|
Re: Comunity vs i.MX
#yocto
Hello,
Em qui., 23 de jun. de 2022 às 14:41, Константин Еременок <eremenok.k.by@...> escreveu:
There was never a war. Both serves different goals.
Lack of people to help
Hello,
Em qui., 23 de jun. de 2022 às 14:41, Константин Еременок <eremenok.k.by@...> escreveu:
There was never a war. Both serves different goals.
Lack of people to help
|
By
Otavio Salvador
·
#24850
·
|
|
Re: Comunity vs i.MX
#yocto
Hello Konstantin,
<eremenok.k.by@...> wrote:
AFAIK, there was no war declared, not at least that I was aware of
when I started using Yocto Project and `meta-freescale` layer. ;-)
NXP is
Hello Konstantin,
<eremenok.k.by@...> wrote:
AFAIK, there was no war declared, not at least that I was aware of
when I started using Yocto Project and `meta-freescale` layer. ;-)
NXP is
|
By
Andrey Zhizhikin
·
#24849
·
|
|
Comunity vs i.MX
#yocto
Hi there.
I have not followed Yocto iMX for some time.
Today I found in the document "i.MX Yocto Project User's Guide" from NXP such text:
"i.MX joined the Yocto Project community providing a
Hi there.
I have not followed Yocto iMX for some time.
Today I found in the document "i.MX Yocto Project User's Guide" from NXP such text:
"i.MX joined the Yocto Project community providing a
|
By
Константин Еременок
·
#24848
·
|
|
imx8mq no hdmi when booted from SD card
Hi,
I've tried on the NXP forum but the response was to try it on evk ;).
I have a custom imx8mq baseboard. I'be using dunfell release of
meta-freescale/ and image flashed using uuu to emmc have hdmi
Hi,
I've tried on the NXP forum but the response was to try it on evk ;).
I have a custom imx8mq baseboard. I'be using dunfell release of
meta-freescale/ and image flashed using uuu to emmc have hdmi
|
By
Marek Belisko
·
#24847
·
|
|
Re: u-boot and devtool
Hi,
Check if you have 'workspace/sources/u-boot-fslc/oe-workdir/u-boot-fslc-v2022.04+git999/<board-name>_defconfig/.config'. I think this is the .config used when enabled devtool for
Hi,
Check if you have 'workspace/sources/u-boot-fslc/oe-workdir/u-boot-fslc-v2022.04+git999/<board-name>_defconfig/.config'. I think this is the .config used when enabled devtool for
|
By
Peter Bergin
·
#24846
·
|
|
Re: u-boot and devtool
Mauro,
I am afraid I cannot help as I don't use it myself. I use it with toolchain for patching.
Em sex., 17 de jun. de 2022 às 12:48, Mauro Ziliani <mauro@...> escreveu:
--
Otavio Salvador
Mauro,
I am afraid I cannot help as I don't use it myself. I use it with toolchain for patching.
Em sex., 17 de jun. de 2022 às 12:48, Mauro Ziliani <mauro@...> escreveu:
--
Otavio Salvador
|
By
Otavio Salvador
·
#24845
·
|
|
u-boot and devtool
Hi all.
I try to use devtool to make some patch for u-boot-fslc.
When I make the menuconfig for u-boot-fslc where is placed the .config file?
MZ
Hi all.
I try to use devtool to make some patch for u-boot-fslc.
When I make the menuconfig for u-boot-fslc where is placed the .config file?
MZ
|
By
Mauro Ziliani
·
#24844
·
|
|
Re: imx51evk and u-boot
Sorry for my offtopic.
I need to study better the schema
Thanks for your time.
MZ
Sorry for my offtopic.
I need to study better the schema
Thanks for your time.
MZ
|
By
Mauro Ziliani
·
#24843
·
|
|
Re: imx51evk and u-boot
Hi Mauro,
[Please note that this is offtopic here]
Yes, this is expected.
You are using the U-Boot mx51evk target, but your board is a custom one.
You said it has 1GB of RAM, so you need to adapt
Hi Mauro,
[Please note that this is offtopic here]
Yes, this is expected.
You are using the U-Boot mx51evk target, but your board is a custom one.
You said it has 1GB of RAM, so you need to adapt
|
By
Fabio Estevam
·
#24842
·
|
|
Re: imx51evk and u-boot
My boot stops here
U-Boot 2020.04-mz-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000)
CPU: i.MX51 rev3.0 at 800 MHz
Reset cause: POR
Model: Freescale i.MX51 Babbage
My boot stops here
U-Boot 2020.04-mz-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000)
CPU: i.MX51 rev3.0 at 800 MHz
Reset cause: POR
Model: Freescale i.MX51 Babbage
|
By
Mauro Ziliani
·
#24841
·
|
|
Re: imx51evk and u-boot
<otavio.salvador@...> wrote:
imx51evk has 512MB of RAM.
You need to adapt the DDR for your specific board to be able to boot it.
Yes, it boots well with the top of tree U-Boot:
U-Boot
<otavio.salvador@...> wrote:
imx51evk has 512MB of RAM.
You need to adapt the DDR for your specific board to be able to boot it.
Yes, it boots well with the top of tree U-Boot:
U-Boot
|
By
Fabio Estevam
·
#24840
·
|
|
Re: imx51evk and u-boot
Em sáb., 11 de jun. de 2022 às 13:55, Mauro Ziliani <mauro@...> escreveu:
u-boot-fslc
It has been ages since I used those. @Fabio Estevam have you tried them lately?
--
Otavio Salvador
Em sáb., 11 de jun. de 2022 às 13:55, Mauro Ziliani <mauro@...> escreveu:
u-boot-fslc
It has been ages since I used those. @Fabio Estevam have you tried them lately?
--
Otavio Salvador
|
By
Otavio Salvador
·
#24839
·
|
|
imx51evk and u-boot
Hi all.
I'm trying to build Yocto dunfell for imx51evk derived board.
The board has only sd card with 1 dram of ram.
It is better u-boot-imx or u-boot-fslc as bootloader?
I try the two version
Hi all.
I'm trying to build Yocto dunfell for imx51evk derived board.
The board has only sd card with 1 dram of ram.
It is better u-boot-imx or u-boot-fslc as bootloader?
I try the two version
|
By
Mauro Ziliani
·
#24838
·
|
|
restool: build error
Hi, all
I built restool with new poky, but failed. The error is like the following. So, is there anybody can give me some suggestions?
----------------------------
| mc_v10/dprc.c: In function
Hi, all
I built restool with new poky, but failed. The error is like the following. So, is there anybody can give me some suggestions?
----------------------------
| mc_v10/dprc.c: In function
|
By
leimaohui
·
#24837
·
|
|
libfdt_wrap.c:154:11: fatal error: Python.h: No such file or directory
Hi,
I have backported the following recipes from honister to dunfell:
- u-boot-fslc-common_2022.04.inc
- u-boot-fslc_2022.04.bb
u-boot-fslc and also my image that use the u-boot-fslc can be built
Hi,
I have backported the following recipes from honister to dunfell:
- u-boot-fslc-common_2022.04.inc
- u-boot-fslc_2022.04.bb
u-boot-fslc and also my image that use the u-boot-fslc can be built
|
By
Michael Glembotzki
·
#24836
·
|
|
[PATCH] fmlib: set precise BSD license
From: Meng Li <meng.li@...>
When building fmlib package based on Yocto 4.0, there is below
warning reported
WARNING: fmlib-git-r1 do_populate_lic: QA Issue: fmlib:
No generic license file
From: Meng Li <meng.li@...>
When building fmlib package based on Yocto 4.0, there is below
warning reported
WARNING: fmlib-git-r1 do_populate_lic: QA Issue: fmlib:
No generic license file
|
By
Meng Li <meng.li@...>
·
#24835
·
|
|
signing an initramfs kernel
On my i.mx8mp board I have secure boot enabled. I can boot a signed kernel fine. I'd like to now sign the kernel used with the initramfs image. I don't understand if that kernel is the same as the
On my i.mx8mp board I have secure boot enabled. I can boot a signed kernel fine. I'd like to now sign the kernel used with the initramfs image. I don't understand if that kernel is the same as the
|
By
Embedded 1
·
#24834
·
|
|
Re: Cairo fails to compile with musl
#kirkstone
#compilation
Hello Ettore,
Em ter., 12 de abr. de 2022 às 14:12, Ettore Chimenti <ek5.chimenti@...> escreveu:
This isn't expect to work as this is a binary blob. I suggest you to move to Linux mainline if this is
Hello Ettore,
Em ter., 12 de abr. de 2022 às 14:12, Ettore Chimenti <ek5.chimenti@...> escreveu:
This isn't expect to work as this is a binary blob. I suggest you to move to Linux mainline if this is
|
By
Otavio Salvador
·
#24833
·
|