Zhenhua, June is too late; you need to send the fix soon or we should drop dunfell release for QorIQ. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br

The new QorIQ SDK based on Zeus is being prepared and plan to be available in June, we will port the perf patch in this release. Best Regards, Zhenhua

I have this patch ported to linux-imx kernel [1], probably you should do the same for linux-qoriq. Try to add it into the recipe and if it would work out - send a PR. [1]:

Hi, I met perf bug by meta-freescale as following: --------------------------------------------------------------------- tmp/work/armv8-linux/perf/1.0-r9/perf-1.0/perf-in.o: in function

Hi Carlos, Sure, that has been acceptable to us as as most customer don't use PxP on i.MX6 but prefer GPU2D/3D features. How did that work on GStreamer-imx before? Because this issue has been there

Two problems actually. First, gstreamer1.0-plugins-imx has its PxP plugin enabled. Second, libimxdmabuffer's PxP allocator is enabled. This allocator is then tested for in the test-alloc program.

Hi Carlos, Well the board itself (Nitrogen6x) is the same, only the CPU populated changed (pin-to-pin compatible) so it made sense not to separate the machine. Then as the commit from Eric explained

The nitrogen6x machine config also supports other machines according to the comment block inside the .conf file: This is the reason for this line in the config: MACHINEOVERRIDES =.

Sorry It's prefix is net but not drivers/net, so it is there... Nus

Hi All, When I build NXP nfc driver, I got a error that some unknown symbol, after tracing the code, I found there is no nfc hci driver while in mailline linux kernel 4.14.98 contains it in

Thanks, that fixed it. I'll send a PR. On 19.04.20 10:45, Andrey Zhizhikin wrote:

<crg7475@...> wrote: It is that the nitrogen8m does not have that tune file included. Instead, it uses a more generic [conf/machine/include/arm/arch-arm64.inc] tune file, which should

I tried to build a nitrogen8m image with the current master branches of poky, meta-freescale, meta-freescale-3rdparty, and meta-openembedded. However, I immediately got this

As I encountered severals issues on zeus, I decided to rollback and paid couple days to download/build sumo imx-4.14.98_2.0.0_ga.xml (actually 2.0.1_patch.xml), but I'm curious why it CANNOT pass the

Hi, I don't know whether it is a known issue: when running traditional qt application based on widget like animatedtiles example, the performance is terrible and even worse than i.MX25 (ARM9 without

Well, where can I found the known issues on this release? as for this gst issue, I found on it works normally on imxv4l2sink, on waylandsink the display looks OK but the performance is only 1.X

Sorry, Nus, this is a known issue in this release. Please note that the 5.4.3-2.0.0 release was a targeted release for 8MP/8DXL Alpha and 8QXPC0 Beta. Due to resource constraints, 6DL was not fully

Hi All, Any tips that I can trace the issue? there are many binary libraries involved makes it difficult to debug... PS: "alloc_contig_range: [X, Y) PFNs busy" is not the root issue as I changed a low

Hi All, Today I tested video playback by gst-play, the sound is perfect without any lag, but the display looks abnormal. when sliding pictures, the display looks good and the same board is no problem

Please drop. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347)