Trying to get linux-fslc-imx running on a new custom carrier board running a Karo-8133 module and I'm stuck trying to get the root filesystem to detect. Trying different things the boot process can

Hi Have a look here: https://www.yoctoproject.org/pipermail/yocto/2018-March/040486.html So either update your U-Boot to something newer, cherry-pick the mentioned commit from upstream U- Boot or

I'm getting a data-abort exception every time i access the FEC ethernet device from u-boot; it happens using tftp or just ping. With the same source everything works fine just switching the

Hi Christian, My Lightwing application runs OpenGL ES full-screen only. I found that you really don't have to use Wayland, but just use the lower-level DRM (Display Resource Manager)

Hi, Please can i know how to replace the alsa-utils package with the different version. since Im using the Yocto 2.5.3 (sumo) and in local.conf i append the alsa-utils , its of the version

Hi, I created recipes-bsp and an appended file u-boot-imx_2018.03.bbappend to build a customized imx6ullevk image, I added my configures in #define CONFIG_EXTRA_ENV_SETTINGS in mx6ullevk.h, it built

Hello, I have a Variscite Dart i.MX8M (this Model:http://variwiki.com/index.php?title=DART-MX8M) and I want to run a single application (Qt) without window decoration, and it should run in

Please ignore this post. I solved Il 03/03/20 16:50, Mauro Ziliani ha scritto:

Hi all Sorry but I need to rework with Krogoth. I look inside image_types_fsl.bbclass because I cannot produce the .sdcard image. I see at line 320 this command

I’m running into a rather odd issue when attempting to upgrade a custom target (machine and distro) based off of the iMX6 platform from Thud to Warrior. (The build works just fine in Thud.) The

Hi Mauro, I would first determine if this problem could be caused by a problem with gstreamer. One way to do that would be to run the camera with the mxc_v4l2_capture.out app

Hi, I have three MTD partitions, the mtd2 storage installed UBIFS volumes, first is dtb volume, second is kernel volume, third is rootfs volume. The saveenv was configured to save environment

Hi, I have a question about enabling lpuarts in u-boot for the purpose of communicating with a peripheral device. i am using the ls1043ardb sdboot as a jumping off point and all I did was enable the

Hi JH, FYI, U-boot was still slowly migrating to Kconfig only back then (maybe still is). There was for a long time a mix between Kconfig options and options in what I call board header files

Hi, My hardware is based on IMX6ULEVK. I have pulled yocto SUMO version (imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml) and added few layers in the sources/base/conf/bblayer.conf file. I have also

Hi, I know this is a long shot... I've been doing quite a lot of work recently with some older, ARM926ej-s, hardware (specifically the lpc32xx) and have become rather interested in other such

Okay. This is what I'm getting: $ bitbake virtual/bootloader -e | grep

Please open an issue on github? IIRC, we are using different build directories for S and B so I am wondering why it is failing. -- Otavio Salvador O.S.

Hi Otavio, Master on everything: Build Configuration: BB_VERSION = "1.44.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "opensuseleap-15.1" TARGET_SYS =

Please prepare a PR on github against master, so we can later cherry-pick it. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br