Hola, Acabo de firmar la petición de "Todos: Paz mundial" y me encantaría que me ayudaras sumando tu firma. Nuestro objetivo es llegar a 100 firmas y necesitamos más apoyo. Para obtener más

Hello, I am a little bit new to yocto, I am looking for some help/reference link for simple-card driver integration for FM tuner chip to get audio data to the iMX8m-mini board through the I2S

Hi, I have a following statement to remove a node in a DTS file: &gpmi { /delete-node/ fsl,use-minimum-ecc; }; I can build it correctly in OpenWRT build, but I cannot built it correctly in OE /

Hello, Please refer to LSDK document – Chapter 5 bootloader which include some detailed information about TF-A and u-boot. You can also submit question to NXP community.

hello all, I am trying to boot ls1043a without optee. I managed to compile and run atf until it jumps to uboot. There i do not get any serial output anymore. INFO: Loading image id=5 at address

It is not. Please open a issue. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854

Hi, when I generate a SDK (for example by running MACHINE=imx8mmevk bitbake -c populate_sdk core-image-weston), I notice that the headers from linux-imx-headers are missing even though

Hi Team, We are using a Custom imx28-evk based board with the latest iMX yocto images (Zeus) ported into it. Linux version 5.4.20-fslc+g18d5e274c780. The problem is when the board boots up we keep on

I have an Opal 5 SOM and DevKit which is based on the i.MX53 ARD reference design, and am trying to get it to boot via the SD card. I'm using Yocto 3.1 (Dunfell) and meta-freescale (current). My

Hi, I want to use fw_printenv/setenv utilities on iMX6ULL Linux, the u-boot version is different between meta-freescale and oe-core, meta-freescale uses u-boot-imx_2018.03.bb

OK, thank you for your reply. Best regards Lei

Sure, it would be helpful if you can submit the patch. Best Regards, Zhenhua

Hi, So, may I backport this patch to linux-qoriq_5.4.bb and send a PR? Best regards Lei Maohui

Zhenhua, June is too late; you need to send the fix soon or we should drop dunfell release for QorIQ. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br

The new QorIQ SDK based on Zeus is being prepared and plan to be available in June, we will port the perf patch in this release. Best Regards, Zhenhua

I have this patch ported to linux-imx kernel [1], probably you should do the same for linux-qoriq. Try to add it into the recipe and if it would work out - send a PR. [1]:

Hi, I met perf bug by meta-freescale as following: --------------------------------------------------------------------- tmp/work/armv8-linux/perf/1.0-r9/perf-1.0/perf-in.o: in function

Hi Carlos, Sure, that has been acceptable to us as as most customer don't use PxP on i.MX6 but prefer GPU2D/3D features. How did that work on GStreamer-imx before? Because this issue has been there

Two problems actually. First, gstreamer1.0-plugins-imx has its PxP plugin enabled. Second, libimxdmabuffer's PxP allocator is enabled. This allocator is then tested for in the test-alloc program.

Hi Carlos, Well the board itself (Nitrogen6x) is the same, only the CPU populated changed (pin-to-pin compatible) so it made sense not to separate the machine. Then as the commit from Eric explained