Andrey, I changed my local.conf and doing another buid to test with. I added the first two lines, the rest is stock the way it was created: PREFERRED_PROVIDER_virtual/kernel =

On Thu, Jul 30, 2020 at 01:41 AM, Andrey Zhizhikin wrote: Brian, I guess your SD Card image is corrupted during flashing, all log details actually point to that fact. I don't think so. The

Brian, I guess your SD Card image is corrupted during flashing, all log details actually point to that fact. This happens because rootfs partition cannot be mounted as it appears to be corrupted,

Update. I went into kernel config and gutted a bunch of setting for things I don't care about (wow ... 5.4 sure has a bunch of new stuff). I turned off PCI, bluetooth, wifi etc. I really think

On Wed, Jul 29, 2020 at 02:20 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 02:07 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 4:49 PM Andrey Zhizhikin <andrey.z@...> wrote: > > [

On Wed, Jul 29, 2020 at 02:07 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 4:49 PM Andrey Zhizhikin <andrey.z@...> wrote: > > [ 0.000000] Booting Linux on physical CPU 0x0000000000

Sure, here you go: bitbake core-image-minimal Loading cache: 100% |##################################################################################################| Time: 0:00:00 Loaded 3244

This kernel version does not match to what is currently present in the [dufell] branch of community BSP. Current linux-fslc-imx version included there is actually 5.4.51. Version 5.4.3 looks a rather

Hi, Bottom line up front, built fsl-community-bsp dunfell for imx8mmevk and Linux 5.4 kernel hangs on boot. So far I've been NXP official releases. I really needed the 5.4 kernel so was excited when

Hi all, I'm working on a custom board based on IMX8MM. My RAM calibration tool works only with u-boot 2018.03 to 2018.04, and I already have a u-boot recipe with all the patches necessary. In sumo

Does your local.conf point to the right MACHINE? Also check your recipes-bsp/conf/layer.conf. Marc

Hello, I'm trying to fix and add some variables to my recipes-bsp/conf/machine/imx8mmdddr3lval.conf file, like editing MACHINE_FEATURES , and SERIAL_CONSOLES . I already have a separate layer that

Hello Sebastian Most of the cases it getting failed in post install intercept. Those errors are suspicious, Try to install the patch into poky layer and rebuild the Image. Thanks & Regards, Mathanraj

Hello, I am not sure if this is the right place to ask this, so I would be very grateful if you could point me in the right direction, if not… I have a custom board which uses the TXUL-8013

Hi, working with dunfell branch and I want to build image for i.Mx8M Nano EVK and using u-boot-fslc as bootloader. I have this setup in my conf/auto.conf:

Hola, Acabo de firmar la petición de "Todos: Paz mundial" y me encantaría que me ayudaras sumando tu firma. Nuestro objetivo es llegar a 100 firmas y necesitamos más apoyo. Para obtener más

Hello, I am a little bit new to yocto, I am looking for some help/reference link for simple-card driver integration for FM tuner chip to get audio data to the iMX8m-mini board through the I2S

Hi, I have a following statement to remove a node in a DTS file: &gpmi { /delete-node/ fsl,use-minimum-ecc; }; I can build it correctly in OpenWRT build, but I cannot built it correctly in OE /

Hello, Please refer to LSDK document – Chapter 5 bootloader which include some detailed information about TF-A and u-boot. You can also submit question to NXP community.

hello all, I am trying to boot ls1043a without optee. I managed to compile and run atf until it jumps to uboot. There i do not get any serial output anymore. INFO: Loading image id=5 at address