Hello, I have a custom board that has IMX6 Solo Automotive Grade SoC. I need to bring it up with Automotive Grade Linux. (Using linux-fslc 4.20). I have copied mx6sabreauto machine and renamed it to

Hi, I'm looking into doing the rt patch against linux-fslc-imx 5.4.51. Doesn't look like anyone has done this for the imx8mm. I see a recipe for linux-fslc-imx-rt 4.1.-1.0.x but looks like it's for

Hey Philippe, <philippe.schenker@...> wrote: I've tried to build the branch from your repo with latest master of meta-freescale, and saw couple of issue with imx8mmevk machine: 1.

Hi Andrey, We were building binutils-2.34 so didn't notice this issue. I've cherry- picked the patch you mentioned. Philippe

Hello Philippe, On Mon, Aug 10, 2020 at 12:01 PM Philippe Schenker via lists.yoctoproject.org <philippe.schenker=toradex.com@...> wrote: This is great news! I was half the way of

Hi, Toradex is currently working on integrating the new NXP release 'L5.4.24_2.1.0'. For this we created a new kernel branch '5.4-2.1.x-imx' based on NXP's kernel 'imx_5.4.24_2.1.0'. We already

Hi Brian, I fixed my problem yesterday, thank you for your answer. The problem was the URL on the file firmware-imx.inc, i took this new file :

On Sun, Aug 2, 2020 at 11:53 PM, <kar_947@...> wrote: Hi Bas, Thank you for your answer. I dont know how to upgrade the yocto by the way. I am using the BSP of my IMX6 Board, given by the constructor.

Hi Bas, Thank you for your answer. I dont know how to upgrade the yocto by the way. I am using the BSP of my IMX6 Board, given by the constructor. Anyway. I tought that the purpose of the files

Your problem is that you are using an old version of Yocto (most likely an early Krogoth version) and things have moved on. Including file locations and possibly contents, as you had before with the

Hi everyone, I have a big problem during the compilation of the Yocto project. I have an error with the file firmware-imx_5.4.bb and the file firmware-imx.inc. I have tried everything. Please, some

Hi, If I build my image based on imx6ullevk with linux-fslc everything works fine, but when I run "devtool modify linux-fslc" it throws this error: NOTE: Executing Tasks ERROR: Execution of

Andrey, I changed my local.conf and doing another buid to test with. I added the first two lines, the rest is stock the way it was created: PREFERRED_PROVIDER_virtual/kernel =

On Thu, Jul 30, 2020 at 01:41 AM, Andrey Zhizhikin wrote: Brian, I guess your SD Card image is corrupted during flashing, all log details actually point to that fact. I don't think so. The

Brian, I guess your SD Card image is corrupted during flashing, all log details actually point to that fact. This happens because rootfs partition cannot be mounted as it appears to be corrupted,

Update. I went into kernel config and gutted a bunch of setting for things I don't care about (wow ... 5.4 sure has a bunch of new stuff). I turned off PCI, bluetooth, wifi etc. I really think

On Wed, Jul 29, 2020 at 02:20 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 02:07 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 4:49 PM Andrey Zhizhikin <andrey.z@...> wrote: > > [

On Wed, Jul 29, 2020 at 02:07 PM, Brian Hutchinson wrote: On Wed, Jul 29, 2020 at 4:49 PM Andrey Zhizhikin <andrey.z@...> wrote: > > [ 0.000000] Booting Linux on physical CPU 0x0000000000

Sure, here you go: bitbake core-image-minimal Loading cache: 100% |##################################################################################################| Time: 0:00:00 Loaded 3244

This kernel version does not match to what is currently present in the [dufell] branch of community BSP. Current linux-fslc-imx version included there is actually 5.4.51. Version 5.4.3 looks a rather