Em ter., 20 de out. de 2020 às 05:28, Wouter Vanhauwaert <w.vanhauwaert@...> escreveu: Please open an issue on github so we can hook NXP people on it. -- Otavio Salvador

On Tue, Oct 20, 2020 at 10:19 AM Carlos Rafael Giani via lists.yoctoproject.org <crg7475=mailbox.org@...> wrote: From the past experience I had with ION allocators in the past,

Hello Carlos, Em ter., 20 de out. de 2020 às 05:19, Carlos Rafael Giani via lists.yoctoproject.org <crg7475=mailbox.org@...> escreveu: Please prepare the PR for it; also see if

Ok, so I did the same with distro fsl-x11 distro (same local.conf as above, only changed distro) and issue prevails. though imxeglvivsink is tot there anymore, but I tried with glimagesink and caught

On i.MX6 machines, it is currently not possible to use the ION allocator. However, there is no hardware limitation that requires ION to be disabled. If ION were enabled, with a CMA heap, then it

Hello all, Tried to add chromium to NXP-BSP like it is described in IMX_YOCTO_PROJECT_USERS_GUIDE.pdf for L5.4.47_2.2.0 for NXP-Zeus-2.2.0 BSP for imx6qsabresd Error was: ERROR:

Ok, I'll do that now. In the mean time I built a core-image-x11 for imx6qdlsabresd with following changes in local.conf:With none of my own layers enabled, and the problem persists.

Em sex., 16 de out. de 2020 às 12:17, Wouter Vanhauwaert <w.vanhauwaert@...> escreveu: Could you check against 'fsl-x11' and see if it also fails, please? -- Otavio Salvador

The distro is based on fslc-x11, so I guess that would make gstreamer1.0-imx then

Hello Wouter, Em sex., 16 de out. de 2020 às 05:24, Wouter Vanhauwaert <w.vanhauwaert@...> escreveu: ... What plugin are you using? gstreamer1.0-imx or gst-imx-plugin? -- Otavio Salvador

I'm using a custom board/custom distro, based on yocto Dunfell. It's using vivante drivers (so not etnaviv). Running kernel is: 5.4-2.1.x-imx X11 itself is working fine. Although I get a

It is a long file : DEBUG: Executing shell function autotools_preconfigure DEBUG: Shell function autotools_preconfigure finished DEBUG: Executing python function autotools_aclocals DEBUG: SITE files

Talel wrote... What does the log file /media/talel/data/menzu-zeus/menzu/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/temp/log.do_configure.20544 contain? -Andy.

Hi ,All, I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs :

Hello all, Em qui., 8 de out. de 2020 às 06:10, Andrey Zhizhikin <andrey.z@...> escreveu: For all i.MX8 the fslc distributions use the NXP BSP by default so using 'fslc-wayland' should work

Hello Brian, I just did a following build: $ MACHINE=imx8mmevk DISTRO=fsl-wayland bitbake core-image-minimal Image produced boots fine on i.MX8M Mini EVK. Runtime device info: # cat

Hi, Otavio: https://github.com/Freescale/meta-freescale/pull/515 the best, thank you Otavio Salvador <otavio.salvador@...> 於 2020年10月5日 週一 下午3:43寫道：

I think you're mixing up 2 conceptual points here: distro vs image. You can have a wayland distro, but only include a handful of packages and features of it into the image. Distro does not define the

Hello Brian, Well, this is I guess an expected behavior. firmware packages are listed in MACHINE_EXTRA_RRECOMMENDS, which is (according to Yocto Reference manual,

On Tue, Oct 6, 2020 at 04:15 PM, Fabio Estevam wrote: On Tue, Oct 6, 2020 at 6:26 PM Brian Hutchinson <b.hutchman@...> wrote: ... noticed this in dmesg: [ 4.003745] udevd[263]: starting eudev-3.2.9 [