meta-freescale@lists.yoctoproject.org

Re: MTD UBI undefined reference failed to build OE gatesgarth branch

[Dropped u-boot and linux-mtd mailing lists] Hi Jupiter, Sorry, I finally got to look at your issue. We are in fact still working on the gatesgarth branch. I'm sorry you are running into

By Tom Hochstein · #24493 ·

MTD UBI undefined reference failed to build OE gatesgarth branch

Hi Tom and Lauren, I failed to build mx6ull with MTD and UBI in OE and meta-freescahe gatesgarth branch, please be aware that I was able to build it in zeus branch, it seems something broken in

By JH · #24492 ·

Re: MTD UBI undefined reference failed to build OE gatesgarth branch

Thanks for your response. I am sorry, I thought that is what meta-freescale for, right? NXP might involve the coding, but is it integrated and released by Yocto / OE

By JH · #24491 ·

Re: MTD UBI undefined reference failed to build OE gatesgarth branch

Hello Jupiter, From all the build logs you have, it look to me that you're trying to build the U-Boot delivered by NXP as a part of their BSP release. In this case, I suggest you'd rather contact

By Andrey Zhizhikin · #24490 ·

Re: MTD UBI undefined reference failed to build OE gatesgarth branch

Hello, The mtd build was fine, what could be missing not to link mtd? $ ls 2020.04-r0/build/mx6ull_14x14_evk_nand_config/drivers/mtd built-in.o mtdcore.su mtdpart.o mtd_uboot.o mtd-uclass.o

By JH · #24489 ·

MTD UBI undefined reference failed to build OE gatesgarth branch

Hello, I was able to build MTD, UBI and u-boot on OE version Zeus branch, but failed in gatesgarth branch. Here are errors, what could I be missing? u-boot-imx/2020.04-r0/git/cmd/ubi.c:478:

By JH · #24488 ·

Enable Etnaviv driver for IMX8MQ

Hello, I would like to know if it is possible to use Etnaviv driver instead of IMX-GPU-VIV on the IMX8MQEVK for hardware acceleration ? Did someone already manage to setup such

By Dylan Laduranty · #24487 ·

Re: i.mx8mm desktop environment

Hello, Em qua., 9 de dez. de 2020 às 12:21, Erhan via lists.yoctoproject.org <erhan14=yahoo.com@...> escreveu: Yes, this is technically viable but I strongly advise you use at least dunfell for this.

By Otavio Salvador · #24486 ·

i.mx8mm desktop environment

Sorry if this is the wrong mailing list. We want to build a desktop environment for i.mx8m mini EVK. As only wayland is supported with GPU acceleration which desktop environments we can build out of

By Erhan · #24485 ·

Re: Using a .dtb built with kernel from Yocto 3.1.1 with u-boot from Yocto 3.1.2 results in "base fdt does did not have a /__symbols__ node ..."

I made an error in my original post. It was when I moved from Yocto 3.1.2 to 3.1.3 that I noticed this whole: "failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND base fdt does did not have a

By Brian Hutchinson · #24484 ·

Using a .dtb built with kernel from Yocto 3.1.1 with u-boot from Yocto 3.1.2 results in "base fdt does did not have a /__symbols__ node ..."

I have no clue what my problem is here. I built imx8mm-evk.dtb (kernel version 5.4.51) in Yocto meta-freescale environment from Dunfell/Yocto 3.1.1, and then moved on to Dunfell/Yocto 3.1.2. Looks

By Brian Hutchinson · #24483 ·

Re: #yocto #meta-java #yocto #meta-java

<richard.leitner@...> wrote: I believe the reason is NXP provides their vendor BSP based on zeus, hence the author opted to checkout corresponding branch in meta-java. This is a good

By Andrey Zhizhikin · #24482 ·

Re: #yocto #meta-java #yocto #meta-java

Hi, I guess that should read "origin/zeus"? 😉 Is there a specific reason why you're using zeus? I'm asking because I'm currently not maintaining the zeus branch of meta-java (as it's

By Richard Leitner · #24481 ·

#yocto #meta-java #yocto #meta-java

Hello; I'm working on a Ubuntu 18.04 machine. and NXP release L5.4.24 for IMX8M Mini. I did successfully "bitbake" my custom image. Then I am trying to add support for openjdk-8. Referred "How to add

By feki.ayman94@... · #24480 · Edited

Re: Cannot run "devtool mofidy linux-fslc" in Dunfell branch

Hi, I'm facing the exact same issue. This is the ("same") message after updating to 5.4.72 on poky 3.2 to see if that would resolve the issue. ERROR: Execution of

By bartvanderlaan · #24479 ·

Re: Cannot run "devtool mofidy linux-fslc" in Dunfell branch

I'm still having the same issue. I cannot run devtool modify linux-fslc. I'm using dunfell with imx6ullevk.

By Ks89 <stefano.cappa.ks89@...> · #24478 ·

Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

https://github.com/Freescale/meta-freescale Em ter., 20 de out. de 2020 às 14:28, Wouter Vanhauwaert <w.vanhauwaert@...> escreveu: -- Otavio Salvador O.S.

By Otavio Salvador · #24477 ·

Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Ehm, which github? And would anyone be able to reproduce it at his side? (so I know it's not just me ;-))

By Wouter Vanhauwaert · #24476 ·

Re: Enabling ION with CMA heap on imx6

Yes, this happened in the past. However, the benefits of DMA-BUF outweigh this IMO. I also have the libimxdmabuffer library to encapsulate such details. The alternative is to rely on IPU/VPU/etc.

By Carlos Rafael Giani · #24475 ·

Re: Enabling ION with CMA heap on imx6

For i.MX8 it is enabled already. On 20.10.20 13:31, Otavio Salvador wrote:

By Carlos Rafael Giani · #24474 ·

Messages