Hi Mauro, DI1_DISP_CLK is also used on the imx51-evk. I don't understand why you want to include DI1_DISP_CLK into imx51-pinfunc.h. The i.MX51 Reference Manual states that the DI1_DISP_CLK has no

Hi Fabio. In the schematic of the board, the pin J18 is connected to lvds transceiver as DI1_DISP_CLK. I compared the size of the chip and I see there 2 versions: 13x13 mm where

From: Ming Liu <liu.ming50@...> The default 'autovideosink' gives very bad performance when playing H264/H265 videos on IMXQM/IMXQXP machines. Let's choose 'imxvideoconvert_g2d ! autovideosink'

From: Ming Liu <liu.ming50@...> Changes in V2: - Changed the Submiited link to: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1299 Ming Liu (1):

Hello Ming, I'm sorry, but this not the upstream URL this patch refers to. GStreamer upstream development happens here [1], and what the patch is pointing to is (as the description suggests) NXP fork

From: Ming Liu <liu.ming50@...> The default 'autovideosink' gives very bad performance when playing H264/H265 videos on IMXQM/IMXQXP machines. Let's choose 'imxvideoconvert_g2d ! autovideosink'

Hi Mauro, Why? There is no mux option for the DI1_DISP_CLK pin.

Thank you. Il 13/03/23 08:54, Marco Cavallini ha scritto: -- linkedin: https://www.linkedin.com/in/mauroziliani

Hi Mauro, you can refer to our IMX6 definitive GPIO guide related to iMX6 in our wiki and adapt it to the required settings that you can see in the kernel documentation for

Hi all I'm working on and mx51evk babbage board. I have a lvds display connected ti disp1 pads. I need to define DI1_DISP_CLK for pad J18 of the BGA (the chip is 19x19mm) I know the pad

I was trying to boot through NFS. So the problem was that sysinit v3.01 is not allowing root login through NFS. After changing the nfs server side parameters(added no_root_squash,insecure

The problem is that sysinit v3.01 is not allowing root login through NFS. After changing the nfs server side parameters(added no_root_squash,insecure /etc/exports) i am able to boot with NFS

Em ter., 10 de jan. de 2023 às 05:17, Mario Schuknecht <mario.schuknecht@...> escreveu: https://github.com/Freescale/meta-freescale/discussions/1329 -- Otavio Salvador

I am using a imx6 based custom board Made the build system ready using the following guide: https://www.nxp.com/docs/en/user-guide/IMX_YOCTO_PROJECT_USERS_GUIDE.pdf After cloning the yocto source,

Hello, Will there be a langdale branch? Or will only the master branch be used in the future? Regards, Mario

Hello, You can use a task for this, see below: inherit extrausers # Default root password ROOT_USER_PASSWORD ?= "xxx" change_root_password() { echo 'root:${ROOT_USER_PASSWORD}' | chpasswd -R

Hi all, I am usnig the imx6 freescale processor. I am trying to build rootFS with yocto build "5.15-kirkstone" branch I use Sysvinit for my bootup sequence. I cannot reset the root password. I have

Hi, I need to include x11 in my build and consequently set DISTRO_FEATURES_append = " x11" in my local.conf. Upon invocation of bitbake however, I get an error like: | checking for GLAMOR... yes |

Solution: https://github.com/Freescale/meta-freescale/issues/1318#issuecomment-1333725448

You know you can reduce the memory consumption by: 1) Lowering the number of parallel makes (using PARALLEL_MAKE in local.conf or maybe in a .bbappend for the package) 2) Limit the number of bitbake