This targets meta-qoriq. Unfortunately, there is no dedicated mailing list for meta-qoriq. I have CC'd as many relevant people at NXP as I can find. I have added this mailing list to CC in hopes that

Hello Sean, On Fri, Jul 8, 2022 at 10:42 PM Sean Anderson via lists.yoctoproject.org <sean.anderson=seco.com@...> wrote: If this targets `meta-freescale` layer, then perhaps best

ping? Jun, it looks like you're maintaining this, can you please have a look? --Sean

I've used 'links' browser, which is very light-weight but also very minimal features. If your pre-rendered html is fairly simple, it might work out; probably worth taking a look at how some example

You might try WPEWebKit. I've used it before and it's good for a very minimal display of web content while still being fairly full featured. > >

Hi , We are using Yocto Linux 3.0 zeus branch on imx6 based SOC. we are looking for light weight web browser since our HW platform has only 1 GB of RAM supports. as of now we are using chromium

Hello, Em qui., 23 de jun. de 2022 às 14:41, Константин Еременок <eremenok.k.by@...> escreveu: There was never a war. Both serves different goals. Lack of people to help

Hello Konstantin, <eremenok.k.by@...> wrote: AFAIK, there was no war declared, not at least that I was aware of when I started using Yocto Project and `meta-freescale` layer. ;-) NXP is

Hi there. I have not followed Yocto iMX for some time. Today I found in the document "i.MX Yocto Project User's Guide" from NXP such text: "i.MX joined the Yocto Project community providing a

Hi, I've tried on the NXP forum but the response was to try it on evk ;). I have a custom imx8mq baseboard. I'be using dunfell release of meta-freescale/ and image flashed using uuu to emmc have hdmi

Hi, Check if you have 'workspace/sources/u-boot-fslc/oe-workdir/u-boot-fslc-v2022.04+git999/<board-name>_defconfig/.config'. I think this is the .config used when enabled devtool for

Mauro, I am afraid I cannot help as I don't use it myself. I use it with toolchain for patching. Em sex., 17 de jun. de 2022 às 12:48, Mauro Ziliani <mauro@...> escreveu: -- Otavio Salvador

Hi all. I try to use devtool to make some patch for u-boot-fslc. When I make the menuconfig for u-boot-fslc where is placed the .config file? MZ

Sorry for my offtopic. I need to study better the schema Thanks for your time. MZ

Hi Mauro, [Please note that this is offtopic here] Yes, this is expected. You are using the U-Boot mx51evk target, but your board is a custom one. You said it has 1GB of RAM, so you need to adapt

My boot stops here U-Boot 2020.04-mz-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000) CPU:   i.MX51 rev3.0 at 800 MHz Reset cause: POR Model: Freescale i.MX51 Babbage

<otavio.salvador@...> wrote: imx51evk has 512MB of RAM. You need to adapt the DDR for your specific board to be able to boot it. Yes, it boots well with the top of tree U-Boot: U-Boot

Em sáb., 11 de jun. de 2022 às 13:55, Mauro Ziliani <mauro@...> escreveu: u-boot-fslc It has been ages since I used those. @Fabio Estevam have you tried them lately? -- Otavio Salvador

Hi all. I'm trying to build Yocto dunfell for imx51evk derived board. The board has only sd card with 1 dram of ram. It is better u-boot-imx or u-boot-fslc as bootloader? I try the two version

Hi, all I built restool with new poky, but failed. The error is like the following. So, is there anybody can give me some suggestions? ---------------------------- | mc_v10/dprc.c: In function