meta-freescale@lists.yoctoproject.org

Re: Safe to upgrade to a Community BSP?

As is, in the 5.12 upstream branch, RPM (specifically imx7D to M4) should just work? Amount of code in this area seems minimal compared to meta-freescale 5.4 releases. With most of the functionality

By Val Kondratenko · #24714 ·

Re: Safe to upgrade to a Community BSP?

Does anyone know when meta-freescale plans on releasing a new version of their kernel (i.e.-imx)? Or where that information could be available? Thanks, Val

By Val Kondratenko · #24713 ·

Re: Update linux-fslc on hardknott branch

Hello Sam, This is on my TODO list, see https://github.com/Freescale/meta-freescale/pull/814 I'm pretty loaded now, but I'll see if I can bump up the version in recipes somewhen next week. Kernel

By Andrey Zhizhikin · #24712 ·

Update linux-fslc on hardknott branch

Hi, Currently on hardknott branch in meta-freescale, linux-fslc points to version 5.10.32. However latest 5.10 version in linux-fslc repo is 5.10.47. Would it be possible to update linux-fslc in

By Sam Van Den Berge · #24711 ·

Re: SGTL5000 audio codec #meta-freescale

The driver for the sgtl5000 codec is sound/soc/codecs/sgtl5000.c: at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/sgtl5000.c?h=v5.13 You need to write a

By Fabio Estevam · #24710 ·

Re: Safe to upgrade to a Community BSP?

Is there any need to update to a newer meta-freescale version with upgrade from 5.4 to 5.12 kernel. Thanks, Val

By Val Kondratenko · #24709 ·

Re: Safe to upgrade to a Community BSP?

.. resending, back to this, still seeing the error below. Does anyone have any ideas of why "Module.symvers" would not be present in my 5.12 build, and how to get it there (or at least avoid the

By Val Kondratenko · #24708 ·

#meta-freescale #meta-freescale

Hi guys I have changed my Linux kernel to 5.7 and eth0 works fine in first start. Rebooting can solve second eth problem. I find out the problem is in somewhere around

By mahsahaydari@... · #24707 ·

linux-fslc-imx 5.10

Dear FSLC Maintainers, NXP recently released tag lf-5.10.35-2.0.0 in branch lf-5.10.y of linux-imx repository. Is there any roadmap to introduce this kernel as a reference baseline for linux-fslc-imx

By Matteo Del Bricco · #24706 ·

SGTL5000 audio codec #meta-freescale

Dear colleagues, Does meta-freescale have the driver to control the SGTL5000 audio codec? If so, how do I set the pins that will be used on the raspberry pi and the clock of the fixed crystal I'm

By nanotech.ei@... · #24705 ·

Re: Safe to upgrade to a Community BSP?

Trying to compile the new kernel (and applying our patches from 5.4/modified). Getting this error: DEBUG: Executing shell function do_shared_workdir cp: cannot stat 'Module.symvers': No such file or

By Val Kondratenko · #24704 ·

Re: Safe to upgrade to a Community BSP?

Oops, sorry for duplicate (ignore), meant to send to someone else. And thanks (again) for quick response, Val

By Val Kondratenko · #24703 ·

Re: Safe to upgrade to a Community BSP?

Is the following a recommended upstream u-boot? u-boot-v2021.04 from https://source.denx.de/u-boot/u-boot/ The cpuidle functionality would be in? arch/arm/mach-imx/mx7/psci-mx7.c From when/which

By Val Kondratenko · #24702 ·

Re: Safe to upgrade to a Community BSP?

<valeriy.kondratenko@...> wrote: Yes, that's a good one. U-Boot 2021.07 should be available on July, 5th. The PSCI mechanism in U-Boot will take care of it. No extra action is required.

By Fabio Estevam · #24701 ·

Blocking issue with gstreamer 1.16.2 from meta-freescale layers

Hi, I'm experiencing a weird and blocking issue with gstreamer and more particularly with gst-discoverer-1.0 tool (that uses uridecodebin underlying..). We have tested on Apalis IMX8 and Colibri

By Atiki Karim · #24700 ·

Re: Safe to upgrade to a Community BSP?

<valeriy.kondratenko@...> wrote: No, you should be good with tha mainline U-Boot and kernel combination.

By Fabio Estevam · #24699 ·

Re: Safe to upgrade to a Community BSP?

.. will probably be going to mainline uboot as well. Are there any similar things (like cpuidle moving from kernel to uboot), that I would have to worry about? Thanks in advance, Val

By Val Kondratenko · #24698 ·

Dunfell u-boot build issue (git is not clean)

Hi all; I'm attempting to upgrade a build system that has Thud era recipes to one that targets Dunfell. We have a custom kernel and a custom u-boot (based on 2020.4) so we have our own recipes for

By Matt Walker · #24697 ·

Re: Safe to upgrade to a Community BSP?

Thanks!!!

By Val Kondratenko · #24696 ·

Re: Safe to upgrade to a Community BSP?

Hi Val, <valeriy.kondratenko@...> wrote: In mainline, this is handled by the drivers/remoteproc/imx_rproc.c driver. Regards, Fabio Estevam

By Fabio Estevam · #24695 ·

Messages