On Thu, Sep 10, 2020 at 05:22 AM, Fabio Estevam wrote: Hi Otavio, On Thu, Sep 10, 2020 at 9:09 AM Otavio Salvador <otavio.salvador@...> wrote: Could U-Boot load the correct dtb for the board

Hi Otavio, <otavio.salvador@...> wrote: Unfortunately, this cannot be determined in run-time.

Hello Fabio, Em qui., 10 de set. de 2020 às 09:03, Fabio Estevam <festevam@...> escreveu: Could U-Boot load the correct dtb for the board revision? -- Otavio Salvador

Hi Carlos, <otavio.salvador@...> wrote: Do you have a revB board? If so, please use imx8mm-evk-revb.dtb instead as there is a difference between revB versus revC that is related to the

Hello all, Em qui., 10 de set. de 2020 às 05:12, Carlos Rafael Giani <crg7475@...> escreveu: ... Could you guys open an issue on github about this? -- Otavio Salvador

I have the same problem. imx8mmevk does not boot with Yocto Dunfell. Booting stops at "PCIe PLL lock timeout" or "Initialized imx-drm 1.0.0 20120507 for soc@0:bus@32c00000:display-subsystem

Hi, Yang The following is the status of linux-qoriq that I'm using: ------------------------------------- tmp/work-shared/ubinux-armv8/kernel-source$ git branch * (HEAD detached at 134788b16485)

Hi Lei, May I know which branch you are using? Best Regards, Zhenhua

Hi, Andrey I'm using linux-qoriq and I have updated to the newest commit of meta-freescale. Best regards Lei

Hello Lei, This is covered by [df35e878d0a51755fb500e2e8e29c7ebb0239756] which is present in the kernel tree and came in with v5.4.56. I guess you're not building the latest meta-freescale, since

Hi, By latest meta-freescale, perf build failed, the error is as following: --------------------------------------------- aarch64-ubinux-linux-ld:

Em ter., 25 de ago. de 2020 às 11:13, Mauro Ziliani <mauro@...> escreveu: u-boot-imx does not officially support it, so u-boot-fslc is the best call here. -- Otavio Salvador

Thank you for the answer. For imx51evk which u-boot is better? u-boot-fslc or u-boot-imx?

I'd go with dunfell as you need Linux mainline for it. Em ter., 25 de ago. de 2020 às 06:08, Mauro Ziliani <mauro@...> escreveu: -- Otavio Salvador O.S.

Hi all. I'm working on a imx51evk clone board and  Zeus. U-boot-fslc restart with POR cause. Where i can find good docs for Zeus and imx51evk? Best regards,   MZ

Hello, I want to connect 2 identical FHD screens (timing-wise) to my imx6q board. One is LCD and the other one (dualchannel) LVDS. I only want to render content once (for perfomance) and output it on

Hi Wouter, <w.vanhauwaert@...> wrote: Yes, when I looked at the commit you referred to I thought initially that it only added drivers/video/fbdev/mxsfb.c, which is the eLCDIF controller. In

Sorry, but I think that's not correct... Indeed, you can use fsl,imx-parallel-display, but then you're using the opensource/drm mainline way of addressing the ipu, and not the freescale proprietary

Hi Wouter, <w.vanhauwaert@...> wrote: eLCDIF is a different display controller that is found on other i.MX SoCs like imx23/imx28/imx6sl/imx6sx. On imx6q/dl the display controller is the

Hello Christian, Do you see the same behavior with linux-fslc-imx kernel tree? It is basically NXP kernel + latest patch level from upstream. Can you test that one and let here know if you have the