meta-freescale@lists.yoctoproject.org

Re: Edimax EW7811un + imx6dlsabresd + Krogoth

On 2018-06-19 10:16, Mauro Ziliani wrote: Please don't top post. I reordered the message to keep it readable. > Il 18/06/2018 17:07, Bas Mevissen ha scritto: >> On 2018-06-18 14:41, Mauro Ziliani

By Bas Mevissen · #22672 ·

Re: Edimax EW7811un + imx6dlsabresd + Krogoth

Thanks for the answer. My dongle is based on RTL8192CU. All works fine, but after a small time of inactivity, it's like the dongle go to sleep, but this is not true. Example Time0: I try to upload

By Mauro Ziliani · #22671 ·

X11/wayland configuration for i.mx7 board

I've recently started learning about the Yocto project and freescale. I have an i.mx7 Dual sabre SD board to work with. On the SD card shipped with a the board was a 4.1.15 kernel that boots a

By Dennis Muhlestein · #22670 ·

Configuring UART on SabreSD Board

Hi All, I'm working with iMX6 based Sabre SD board for my project. Details are available here : Link I'm using Yocto to build Linux for this board. I have not done any customization as such to the

By Subin Sebastian · #22669 ·

Re: Edimax EW7811un + imx6dlsabresd + Krogoth

Not specifically this one, but on an RTL8812AU based wifi dongle on the same kernel for i.mx 6sx. That went pretty well. What is your problem? It is used a lot in the rPi world. BR, Bas.

By Bas Mevissen · #22668 ·

[PATCH] gstreamer1.0-plugins-base: Remove append for version 1.14.0

Patch "viv-fb: Include gstglfuncs.h to fix cross compilation errors" has already merged on 1.14.1. Signed-off-by: Fabio Berton <fabio.berton@...> ---

By Fabio Berton · #22667 ·

Edimax EW7811un + imx6dlsabresd + Krogoth

Hi all. Anyone has experience with wifi dongle, imx6dlsabresd on kernel linux-imx 4.1.15? Best regards, Mauro

By Mauro Ziliani · #22666 ·

Re: [yocto] [bitbake] fsl-image-xwayland DISTRO -- can't get rid of dev packages.

Hi Karim It seems that some dev packages are still being pulled in you might want to check output of bitbake -g <image> which will be in bunch of dotty files, that can show what is being pulled and

By Khem Raj <raj.khem@...> · #22665 ·

[bitbake] fsl-image-xwayland DISTRO -- can't get rid of dev packages.

Hi all, I've created a custom image based on core-image. It runs for an i.MX6 and i.MX8. I've installed only Qt, gstreamer and xwayland stuff. I've removed dev-pkgs, dbg-pkgs and staticdev-pkgs

By Atiki Karim · #22664 ·

Re: Layerscape LS1012A RCW/PBI (PBL image) byte-swapping

Hello Tim, Thank you for your commends. You are right. LS1012A rcw do not be swapped . You can swap by the below command : tclsh ${STAGING_BINDIR_NATIVE}/byte_swap.tcl $f $f_swap 8 Rcw new code

By C.r. Guo <chunrong.guo@...> · #22663 ·

Re: Layerscape LS1012A RCW/PBI (PBL image) byte-swapping

Thank you for the pointer. I might have seen that before, but never investigated why it is not working for me. None of the LS1012A board RCW builds result in a file name with "qspiboot" in them.

By Tim Hammer <tdhammer99@...> · #22662 ·

Re: Layerscape LS1012A RCW/PBI (PBL image) byte-swapping

Hello Tim, Rcw has been swap . You can see the below recipes. https://git.yoctoproject.org/cgit/cgit.cgi/meta-freescale/tree/recipes-bsp/rcw/rcw_git.bb do_install () { if [ ${M} =

By C.r. Guo <chunrong.guo@...> · #22660 ·

[PATCH] qemu-qoriq: add recipes

From: Chunrong Guo <chunrong.guo@...> *include the following changes: 6c297a7 - vfio fsl-mc: Expose DPIO cacheable region as cacheable 8e929a8 - fsl-mc: mc-bus device fdt node creation 4be2ad9 -

By chunrong.guo@... · #22661 ·

Layerscape LS1012A RCW/PBI (PBL image) byte-swapping

The RCW/PBI file needs to be byte-swapped before being written into the QSPI flash. Is there a reason why this step has not been included in the Yocto recipe that builds it? Thanks!-- .Tim

By Tim Hammer <tdhammer99@...> · #22658 ·

[PATCH] restool: add dtc to rdepends

From: Chunrong Guo <chunrong.guo@...> Signed-off-by: Chunrong Guo <chunrong.guo@...> --- recipes-dpaa2/restool/restool_git.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff

By chunrong.guo@... · #22659 ·

How to enable OpenVG with meta-qt5 in QWebEngine?

Hi, I would like to be able to use SVG on web pages displayed with QWebEngine (Chromium engine) from meta-qt5 on the UDOO Neo board (i.MX6SoloX). Now it uses more than 70% of the CPU to process and

By Cyril Franceschini <cyril.franceschini@...> · #22656 ·

[Documentation][PATCH] Update NXP support board list to 2.5 (sumo)

From: Chunrong Guo <chunrong.guo@...> *Update NXP machine list *Update u-boot-qoriq version *Update linux-qoriq verison Signed-off-by: Chunrong Guo <chunrong.guo@...> ---

By chunrong.guo@... · #22657 ·

[PATCH 17/17] imx-test: Update to version 7.0

From: Fabio Berton <fabio.berton@...> - Remove .inc file to use only one .bb file - Add alsa-lib to DEPENDS - Add patch to use include path when compile sources from test

By Otavio Salvador · #22655 ·

[PATCH 16/17] gstreamer1.0-plugins-base: Add patch to fix compilations errors

From: Fabio Berton <fabio.berton@...> This patch was merged on gstreamer 1.14.1. For details see link: https://bugzilla.gnome.org/show_bug.cgi?id=794589 Signed-off-by: Fabio Berton

By Otavio Salvador · #22654 ·

[PATCH 15/17] imx-gpu-apitrace: Bump revision to 9281b2c2

From: Fabio Berton <fabio.berton@...> - Add O.S. Systems Software Copyright This includes the following change: - 9281b2c2 MGS-3379 [#ccc] Add more support for

By Otavio Salvador · #22653 ·

Messages