Date   

Re: Enabling ION with CMA heap on imx6

Carlos Rafael Giani
 

For i.MX8 it is enabled already.

On 20.10.20 13:31, Otavio Salvador wrote:

Hello Carlos,

Em ter., 20 de out. de 2020 às 05:19, Carlos Rafael Giani via
lists.yoctoproject.org <crg7475=mailbox.org@...>
escreveu:
On i.MX6 machines, it is currently not possible to use the ION
allocator. However, there is no hardware limitation that requires ION to
be disabled.

If ION were enabled, with a CMA heap, then it would be possible for
userspace to allocate DMA-BUF buffers. I could then enable the ion
packageconfig in the libimxdmabuffer recipe.

The defconfig only needs these additions:

CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y

I tried it out, worked fine.

Using DMA-BUF for allocating physically contiguous memory (via CMA) is
preferable over using other allocators (like the ones from the VPU, IPU
etc.) since it allows for proper buffer sharing, ownership transfer, is
based on FDs (though physical address are accessible via an NXP
extension), and there are extensions in OpenCL, OpenGL etc. for
importing DMA-BUF. V4L2 also has DMA-BUF support.

Opinions?
Please prepare the PR for it; also see if i.MX8 couldn't also benefit from it.





Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Otavio Salvador
 

Em ter., 20 de out. de 2020 às 05:28, Wouter Vanhauwaert
<w.vanhauwaert@...> escreveu:
Ok, so I did the same with distro fsl-x11 distro (same local.conf as above, only changed distro) and issue prevails.
though imxeglvivsink is tot there anymore, but I tried with glimagesink and caught exactly the same segfault:
Please open an issue on github so we can hook NXP people on it.

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


Re: Enabling ION with CMA heap on imx6

Andrey Zhizhikin
 

On Tue, Oct 20, 2020 at 10:19 AM Carlos Rafael Giani via
lists.yoctoproject.org <crg7475=mailbox.org@...>
wrote:

On i.MX6 machines, it is currently not possible to use the ION
allocator. However, there is no hardware limitation that requires ION to
be disabled.

If ION were enabled, with a CMA heap, then it would be possible for
userspace to allocate DMA-BUF buffers. I could then enable the ion
packageconfig in the libimxdmabuffer recipe.

The defconfig only needs these additions:

CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y

I tried it out, worked fine.

Using DMA-BUF for allocating physically contiguous memory (via CMA) is
preferable over using other allocators (like the ones from the VPU, IPU
etc.) since it allows for proper buffer sharing, ownership transfer, is
based on FDs (though physical address are accessible via an NXP
extension), and there are extensions in OpenCL, OpenGL etc. for
importing DMA-BUF. V4L2 also has DMA-BUF support.

Opinions?
From the past experience I had with ION allocators in the past, I
would try to refrain from using it. It is still residing in staging
folder, which means that the API compatibility is not guaranteed. I
had an experience where Application used ION in 4.4.y kernel, and
should be re-written when 4.9.y kernel has been released due to
significant changes in the ION UAPI.

I would personally not recommend using it until it would be moved from
staging to drivers.

If one plans to base development on ION API - this should be taken
into consideration.





--
Regards,
Andrey.


Re: Enabling ION with CMA heap on imx6

Otavio Salvador
 

Hello Carlos,

Em ter., 20 de out. de 2020 às 05:19, Carlos Rafael Giani via
lists.yoctoproject.org <crg7475=mailbox.org@...>
escreveu:
On i.MX6 machines, it is currently not possible to use the ION
allocator. However, there is no hardware limitation that requires ION to
be disabled.

If ION were enabled, with a CMA heap, then it would be possible for
userspace to allocate DMA-BUF buffers. I could then enable the ion
packageconfig in the libimxdmabuffer recipe.

The defconfig only needs these additions:

CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y

I tried it out, worked fine.

Using DMA-BUF for allocating physically contiguous memory (via CMA) is
preferable over using other allocators (like the ones from the VPU, IPU
etc.) since it allows for proper buffer sharing, ownership transfer, is
based on FDs (though physical address are accessible via an NXP
extension), and there are extensions in OpenCL, OpenGL etc. for
importing DMA-BUF. V4L2 also has DMA-BUF support.

Opinions?
Please prepare the PR for it; also see if i.MX8 couldn't also benefit from it.

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Wouter Vanhauwaert
 

Ok, so I did the same with distro fsl-x11 distro (same local.conf as above, only changed distro) and issue prevails.
though imxeglvivsink is tot there anymore, but I tried with glimagesink and caught exactly the same segfault:

root@imx6qdlsabresd:~# DISPLAY=:0 gst-launch-1.0 videotestsrc ! glimagesink
Setting pipeline to PAUSED ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Xlib:  extension "XFree86-DRI" missing on display ":0".
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLING ...
Got context from element 'sink': gst.gl.GLDisplay=context, gst.gl.GLDisplay=(GstGLDisplay)"\(GstGLDisplayX11\)\ gldisplayx11-0";
Caught SIGSEGV
exec gdb failed: No such file or directory
Spinning.  Please run 'gdb gst-launch-1.0 589' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
 


Enabling ION with CMA heap on imx6

Carlos Rafael Giani
 

On i.MX6 machines, it is currently not possible to use the ION allocator. However, there is no hardware limitation that requires ION to be disabled.

If ION were enabled, with a CMA heap, then it would be possible for userspace to allocate DMA-BUF buffers. I could then enable the ion packageconfig in the libimxdmabuffer recipe.

The defconfig only needs these additions:

CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y

I tried it out, worked fine.

Using DMA-BUF for allocating physically contiguous memory (via CMA) is preferable over using other allocators (like the ones from the VPU, IPU etc.) since it allows for proper buffer sharing, ownership transfer, is based on FDs (though physical address are accessible via an NXP extension), and there are extensions in OpenCL, OpenGL etc. for importing DMA-BUF. V4L2 also has DMA-BUF support.

Opinions?


Build error chromium-ozone-wayland in official NXP Zeus-BSP for imx6qsabresd reference platform

Georg Hartinger
 

Hello all,

Tried to add chromium to NXP-BSP like it is described in IMX_YOCTO_PROJECT_USERS_GUIDE.pdf for L5.4.47_2.2.0 for NXP-Zeus-2.2.0 BSP for imx6qsabresd

Error was:

ERROR: chromium-ozone-wayland-83.0.4103.116-r0 do_configure: Execution of '/home/devel/src/bsp-zeus-2.2.0/build/tmp/work/cortexa9t2hf-neon-mx6qdl-poky-linux-gnueabi/chromium-ozone-wayland/83.0.4103.116-r0/temp/run.do_configure.2730481' failed with exit code 1:
ERROR at //build/config/linux/dri/BUILD.gn:11:20: Script returned non-zero exit code.
  dri_driver_dir = exec_script(pkg_config_script,
                   ^----------
Current dir: /home/devel/src/bsp-zeus-2.2.0/build/tmp/work/cortexa9t2hf-neon-mx6qdl-poky-linux-gnueabi/chromium-ozone-wayland/83.0.4103.116-r0/chromium-83.0.4103.116/out/Release/
Command: python /home/devel/src/bsp-zeus-2.2.0/build/tmp/work/cortexa9t2hf-neon-mx6qdl-poky-linux-gnueabi/chromium-ozone-wayland/83.0.4103.116-r0/chromium-83.0.4103.116/build/config/linux/pkg-config.py --dridriverdir dri
Returned 1 and printed out:

Error from pkg-config.

stderr:

Package dri was not found in the pkg-config search path.
Perhaps you should add the directory containing `dri.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dri' found

See //content/gpu/BUILD.gn:134:18: which caused the file to be included.
    configs += [ "//build/config/linux/dri" ]
                  ^-------------------------



The setup on an Ubuntu 20.04 machine was as follows:
$ repo init -u https://source.codeaurora.org/external/imx/imx-manifest  -b imx-linux-zeus -m imx-5.4.47-2.2.0.xml
$ repo sync
$ MACHINE=imx6qsabresd DISTRO=fsl-imx-wayland source imx-setup-release.sh -b build

Then added chromium browser like it is described in the project users guide:
echo "CORE_IMAGE_EXTRA_INSTALL += \"chromium-ozone-wayland\"" >> conf/local.conf

And finally:
bitbake imx-image-multimedia


I think, this is probably related to the mesa build error: https://github.com/Freescale/meta-freescale/issues/509

Any idea on how to fix this or is this just the wrong way to add chromium to the image?


Best Regards,
Georg


--
Georg Hartinger
Software Engineer ARM
congatec AG


Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Wouter Vanhauwaert
 

Ok, I'll do that now.
In the mean time I built a core-image-x11 for imx6qdlsabresd with following changes in local.conf:
DISTRO ?= "fslc-x11"
ACCEPT_FSL_EULA = "1"
IMX_DEFAULT_BSP = "nxp"
CORE_IMAGE_EXTRA_INSTALL += " \
    packagegroup-fsl-gstreamer1.0-full \
"
With none of my own layers enabled, and the problem persists.

root@imx6qdlsabresd:~# uname -an
Linux imx6qdlsabresd 5.4.70+g2d1241e38347 #1 SMP PREEMPT Wed Oct 7 17:10:48 UTC 2020 armv7l GNU/Linux
root@imx6qdlsabresd:~# DISPLAY=:0 gst-launch-1.0 videotestsrc ! imxeglvivsink
Setting pipeline to PAUSED ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLING ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Caught SIGSEGV
exec gdb failed: No such file or directory
Spinning.  Please run 'gdb gst-launch-1.0 474' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
 


Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Otavio Salvador
 

Em sex., 16 de out. de 2020 às 12:17, Wouter Vanhauwaert
<w.vanhauwaert@...> escreveu:
The distro is based on fslc-x11, so I guess that would make gstreamer1.0-imx then
Could you check against 'fsl-x11' and see if it also fails, please?


--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Wouter Vanhauwaert
 

The distro is based on fslc-x11, so I guess that would make gstreamer1.0-imx then


Re: [IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Otavio Salvador
 

Hello Wouter,

Em sex., 16 de out. de 2020 às 05:24, Wouter Vanhauwaert
<w.vanhauwaert@...> escreveu:
I'm using a custom board/custom distro, based on yocto Dunfell. It's using vivante drivers (so not etnaviv).
...
If I run a simple gst-pipeline, it gets a SIGSEGV fault.

root@imx6qtelevic_generic:/lib/modules# DISPLAY=:0 gst-launch-1.0 videotestsrc ! imxeglvivsink
Setting pipeline to PAUSED ...
Xlib: extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLING ...
Xlib: extension "XFree86-DRI" missing on display ":0".
Xlib: extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Caught SIGSEGV
#0 0x76bdebe4 in ?? () from /lib/libc.so.6
#1 0x76c57744 in poll () from /lib/libc.so.6
#2 0x76d66bfa in ?? () from /usr/lib/libglib-2.0.so.0
What plugin are you using? gstreamer1.0-imx or gst-imx-plugin?

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


[IMX6Q][Dunfell] Problem using imxeglvivsink on top of X11

Wouter Vanhauwaert
 

I'm using a custom board/custom distro, based on yocto Dunfell. It's using vivante drivers (so not etnaviv).
Running kernel is: 5.4-2.1.x-imx
X11 itself is working fine. Although I get a VivDRIScreenInit -releated error message in the log:

X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[    34.528] Build Operating System: Linux 
[    34.528] Current Operating System: Linux imx6qtelevic_generic 5.4.46-04202-gd069a637b280 #15 SMP PREEMPT Wed Oct 14 12:13:42 CEST 2020 armv7l
[    34.528] Kernel command line: version=DEV_33968064_1-04-02 console=ttymxc3,115200 ubi.mtd=0 root=ubi0:rootfsA rootfstype=ubifs mtdparts=gpmi-nand:-(ubipart) quiet
[    34.528] Build Date: 29 March 2020  08:21:46PM
[    34.528]  
[    34.534] Current version of pixman: 0.38.4
[    34.535] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    34.535] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.538] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar  9 12:41:08 2018
[    34.565] (==) Using config file: "/etc/X11/xorg.conf"
[    34.566] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.574] (==) No Layout section.  Using the first Screen section.
[    34.576] (==) No screen section available. Using defaults.
[    34.576] (**) |-->Screen "Default Screen Section" (0)
[    34.576] (**) |   |-->Monitor "<default monitor>"
[    34.584] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    34.584] (**) |   |-->Device "i.MX Accelerated Framebuffer Device"
[    34.584] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    34.585] (**) Option "BlankTime" "0"
[    34.585] (**) Option "StandbyTime" "0"
[    34.585] (**) Option "SuspendTime" "0"
[    34.585] (**) Option "OffTime" "0"
[    34.586] (==) Automatically adding devices
[    34.586] (==) Automatically enabling devices
[    34.586] (==) Automatically adding GPU devices
[    34.588] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    34.589] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[    34.589] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    34.590] Entry deleted from font path.
[    34.590] (==) FontPath set to:
 
[    34.591] (==) ModulePath set to "/usr/lib/xorg/modules"
[    34.591] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.600] (II) Loader magic: 0x5f8d80
[    34.600] (II) Module ABI versions:
[    34.600] X.Org ANSI C Emulation: 0.4
[    34.601] X.Org Video Driver: 24.1
[    34.601] X.Org XInput driver : 24.1
[    34.601] X.Org Server Extension : 10.0
[    34.610] (II) no primary bus or device found
[    34.614] (II) LoadModule: "glx"
[    34.630] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    34.793] (II) Module glx: vendor="X.Org Foundation"
[    34.794] compiled for 1.20.8, module version = 1.0.0
[    34.794] ABI class: X.Org Server Extension, version 10.0
[    34.797] (II) LoadModule: "vivante"
[    34.798] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
[    34.809] (II) Module vivante: vendor="X.Org Foundation"
[    34.809] compiled for 1.20.8, module version = 1.0.0
[    34.810] ABI class: X.Org Video Driver, version 24.1
[    34.812] (II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
VivanteGCCORE
[    34.814] (--) using VT number 3
 
[    34.830] (WW) Falling back to old probe method for vivante
[    34.831] (II) Loading sub module "fbdevhw"
[    34.831] (II) LoadModule: "fbdevhw"
[    34.832] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    34.842] (II) Module fbdevhw: vendor="X.Org Foundation"
[    34.843] compiled for 1.20.8, module version = 0.0.2
[    34.843] ABI class: X.Org Video Driver, version 24.1
[    34.843] (II) VIVANTE(0): using default device
[    34.849] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    34.857] (II) VIVANTE(0): Device preferred mode 'fb0':U:1280x800p-59 
[    34.857] (II) VIVANTE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    34.858] (==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
[    34.858] (==) VIVANTE(0): RGB weight 888
[    34.858] (==) VIVANTE(0): Default visual is TrueColor
[    34.858] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
[    34.858] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[    34.858] (**) VIVANTE(0): mExaHwType:1
[    34.858] (II) VIVANTE(0): checking modes against framebuffer device...
[    34.858] (II) VIVANTE(0): checking modes against monitor...
[    34.858] (II) VIVANTE(0): Virtual size is 0x0 (pitch 0)
[    34.858] (==) VIVANTE(0): DPI set to (96, 96)
[    34.858] (II) Loading sub module "fb"
[    34.859] (II) LoadModule: "fb"
[    34.859] (II) Loading /usr/lib/xorg/modules/libfb.so
[    34.889] (II) Module fb: vendor="X.Org Foundation"
[    34.889] compiled for 1.20.8, module version = 1.0.0
[    34.889] ABI class: X.Org ANSI C Emulation, version 0.4
[    34.889] (II) Loading sub module "exa"
[    34.889] (II) LoadModule: "exa"
[    34.889] (II) Loading /usr/lib/xorg/modules/libexa.so
[    34.894] (II) Module exa: vendor="X.Org Foundation"
[    34.894] compiled for 1.20.8, module version = 2.6.0
[    34.894] ABI class: X.Org Video Driver, version 24.1
[    35.200] (II) VIVANTE(0): printing discovered frame buffer 'fb0' supported modes:
[    35.202] (II) VIVANTE(0): Modeline "U:1280x800p-59"x0.0   71.10  1280 1320 1400 1440  800 803 813 823 -hsync -vsync -csync (49.4 kHz eP)
[    35.236] (II) VIVANTE(0): Output DISP3 BG has no monitor section
[    35.237] (II) VIVANTE(0): Printing probed modes for output DISP3 BG
[    35.237] (II) VIVANTE(0): Modeline "U:1280x800p-59"x60.0   71.10  1280 1320 1400 1440  800 803 813 823 -hsync -vsync -csync (49.4 kHz eP)
[    35.238] (II) VIVANTE(0): Output DISP3 BG connected
[    35.238] (II) VIVANTE(0): Using exact sizes for initial modes
[    35.239] (II) VIVANTE(0): Output DISP3 BG using initial mode U:1280x800p-59 +0+0
[    35.239] (II) VIVANTE(0): imxDisplayPreInit: virtual set 1280 x 800, display width 0
[    35.239] (II) VIVANTE(0): VivPreInit: adjust display width 1280
[    35.321] (II) VIVANTE(0): reserve 8355840 bytes for on screen frame buffer; total fb memory size 16721920 bytes; offset of shadow buffer 8355840
[    35.414] (II) VIVANTE(0): hardware: DISP3 BG (video memory: 16330kB)
[    35.472] (II) VIVANTE(0): FB Start = 0xb55c4000  FB Base = 0xb55c4000  FB Offset = (nil)
[    35.484] (II) VIVANTE(0): test Initializing EXA
[    35.606] (II) EXA(0): Driver allocated offscreen pixmaps
[    35.607] (II) EXA(0): Driver registered support for the following operations:
[    35.607] (II)         Solid
[    35.607] (II)         Copy
[    35.607] (II)         Composite (RENDER acceleration)
[    35.607] (II)         UploadToScreen
[    35.609] (==) VIVANTE(0): Backing store enabled
[    35.627] (==) VIVANTE(0): DPMS enabled
[    35.704] (EE) VIVANTE(0): [dri] VivDRIScreenInit failed because Drm can't be opened.
[    35.705] (II) Initializing extension Generic Event Extension
[    35.708] (II) Initializing extension SHAPE
[    35.709] (II) Initializing extension MIT-SHM
[    35.709] (II) Initializing extension XInputExtension
[    35.713] (II) Initializing extension XTEST
[    35.715] (II) Initializing extension BIG-REQUESTS
[    35.715] (II) Initializing extension SYNC
[    35.718] (II) Initializing extension XKEYBOARD
[    35.721] (II) Initializing extension XC-MISC
[    35.721] (II) Initializing extension XFIXES
[    35.722] (II) Initializing extension RENDER
[    35.724] (II) Initializing extension RANDR
[    35.724] (II) Initializing extension COMPOSITE
[    35.726] (II) Initializing extension DAMAGE
[    35.728] (II) Initializing extension MIT-SCREEN-SAVER
[    35.728] (II) Initializing extension DOUBLE-BUFFER
[    35.729] (II) Initializing extension DPMS
[    35.729] (II) Initializing extension Present
[    35.730] (II) Initializing extension DRI3
[    35.732] (II) Initializing extension X-Resource
[    35.732] (II) Initializing extension XVideo
[    35.733] (II) Initializing extension XVideo-MotionCompensation
[    35.734] (II) Initializing extension GLX
[    35.752] (II) AIGLX: Screen 0 is not DRI2 capable
[    36.443] (II) IGLX: Loaded and initialized swrast
[    36.444] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    36.444] (II) Initializing extension XFree86-VidModeExtension
[    36.445] (II) Initializing extension XFree86-DGA
[    36.445] (II) Initializing extension XFree86-DRI
[    36.447] (II) Initializing extension DRI2
[    36.447] (II) Initializing extension vivext
[    36.450] (II) VIVANTE(0): Setting screen physical size to 338 x 211

If I run a simple gst-pipeline, it gets a SIGSEGV fault.
root@imx6qtelevic_generic:/lib/modules# DISPLAY=:0 gst-launch-1.0 videotestsrc ! imxeglvivsink
Setting pipeline to PAUSED ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLING ...
Xlib:  extension "XFree86-DRI" missing on display ":0".
Xlib:  extension "XFree86-DRI" missing on display ":0".
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Caught SIGSEGV
#0  0x76bdebe4 in ?? () from /lib/libc.so.6
#1  0x76c57744 in poll () from /lib/libc.so.6
#2  0x76d66bfa in ?? () from /usr/lib/libglib-2.0.so.0
Spinning.  Please run 'gdb gst-launch-1.0 694' to continue debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:03:45.501871360
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Am I lacking something? Anyone else with similar issues?


Re: [IMX8MM][L5.4.24] dhcp error bind do_configure

BELHADJ SALEM Talel
 

It is a long file :

DEBUG: Executing shell function autotools_preconfigure
DEBUG: Shell function autotools_preconfigure finished
DEBUG: Executing python function autotools_aclocals
DEBUG: SITE files ['endian-little', 'bit-64', 'arm-common', 'arm-64', 'common-linux', 'common-glibc', 'aarch64-linux', 'common']
DEBUG: Python function autotools_aclocals finished
DEBUG: Executing shell function do_configure
automake (GNU automake) 1.16.1
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <https://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by Tom Tromey <tromey@...>
       and Alexandre Duret-Lutz <adl@...>.
AUTOV is 1.16
NOTE: Executing ACLOCAL="aclocal --system-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aclocal/ --automake-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal-1.16" autoreconf -Wcross --verbose --install --force --exclude=autopoint -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal --system-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aclocal/ --automake-acdir=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal-1.16 -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ -I /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4626: warning: underquoted definition of NOM_PATH_FILE
configure.in:4626:   run info Automake 'Extending aclocal'
configure.in:4626:   or see https://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
configure.in:11: warning: prefer named diversions
configure.in:11: warning: prefer named diversions
autoreconf: configure.in: tracing
configure.in:11: warning: prefer named diversions
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'libtool.m4'.
libtoolize: copying file 'libtool.m4/libtool.m4'
libtoolize: copying file 'libtool.m4/ltoptions.m4'
libtoolize: copying file 'libtool.m4/ltsugar.m4'
libtoolize: copying file 'libtool.m4/ltversion.m4'
libtoolize: copying file 'libtool.m4/lt~obsolete.m4'
libtoolize: Consider adding '-I libtool.m4' to ACLOCAL_AMFLAGS in Makefile.am.
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4626: warning: underquoted definition of NOM_PATH_FILE
configure.in:4626:   run info Automake 'Extending aclocal'
configure.in:4626:   or see https://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
configure.in:11: warning: prefer named diversions
configure.in:11: warning: prefer named diversions
autoreconf: running: /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/bin/autoconf --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
configure.in:11: warning: prefer named diversions
autoreconf: running: /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/bin/autoheader --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/bind-9.11.5-P4/libtool.m4/ --include=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot-native/usr/share/aclocal/ --force
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:         [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure.in:11: warning: prefer named diversions
autoreconf: configure.in: not using Automake
autoreconf: running: gnu-configize
configure.in:11: warning: prefer named diversions
autoreconf: Leaving directory `.'
NOTE: Running ../bind-9.11.5-P4/configure  --build=x86_64-linux           --host=aarch64-poky-linux           --target=aarch64-poky-linux           --prefix=/usr           --exec_prefix=/usr           --bindir=/usr/bin           --sbindir=/usr/sbin           --libexecdir=/usr/libexec           --datadir=/usr/share           --sysconfdir=/etc           --sharedstatedir=/com           --localstatedir=/var           --libdir=/usr/lib           --includedir=/usr/include           --oldincludedir=/usr/include           --infodir=/usr/share/info           --mandir=/usr/share/man           --disable-silent-rules           --disable-dependency-tracking           --with-libtool-sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  --enable-ipv6=yes --with-libtool --enable-threads                  --disable-devpoll --enable-epoll --with-gost=no                  --with-gssapi=no --with-ecdsa=yes --with-eddsa=no                  --with-lmdb=no                  --sysconfdir=/etc/bind                  --with-openssl=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr                 --disable-static  --without-libxml2  --without-python --with-readline=-lreadline --with-randomdev=/dev/random
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-dependency-tracking
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/endian-little
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/arm-common
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/arm-64
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common-linux
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common-glibc
configure: loading site script /media/talel/data/menzu-zeus/sources/poky/meta/site/common
configure: loading site script /media/talel/data/menzu-zeus/sources/meta-openembedded/meta-gnome/site/arm-64
configure: loading site script /media/talel/data/menzu-zeus/sources/meta-openembedded/meta-networking/site/endian-little
configure: loading site script /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/share/aarch64-poky-linux_config_site.d/ncurses_config
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-poky-linux-gnu
checking whether make sets $(MAKE)... yes
checking how to print strings... printf
checking for aarch64-poky-linux-gcc... aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot accepts -g... yes
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C89... none needed
checking for a sed that does not truncate output... (cached) sed
checking for grep that handles long lines and -e... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep
checking for egrep... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep -E
checking for fgrep... /media/talel/data/menzu-zeus/gw/tmp/hosttools/grep -F
checking for ld used by aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot... aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking if the linker (aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot ) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... aarch64-poky-linux-nm
checking the name lister (aarch64-poky-linux-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to aarch64-poky-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  option to reload object files... -r
checking for aarch64-poky-linux-objdump... aarch64-poky-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for aarch64-poky-linux-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for aarch64-poky-linux-ar... aarch64-poky-linux-gcc-ar
checking for archiver @FILE support... @
checking for aarch64-poky-linux-strip... aarch64-poky-linux-strip
checking for aarch64-poky-linux-ranlib... aarch64-poky-linux-gcc-ranlib
checking for gawk... gawk
checking command to parse aarch64-poky-linux-nm output from aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot object... ok
checking for sysroot... /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking for a working dd... /media/talel/data/menzu-zeus/gw/tmp/hosttools/dd
checking how to truncate binary pipes... /media/talel/data/menzu-zeus/gw/tmp/hosttools/dd bs=4096 count=1
checking for aarch64-poky-linux-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... aarch64-poky-linux-gcc -E --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -fno-rtti -fno-exceptions... no
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to produce PIC... -fPIC -DPIC
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot PIC flag -fPIC -DPIC works... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot static flag -static works... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -c -o file.o... yes
checking if aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot supports -c -o file.o... (cached) yes
checking whether the aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot linker (aarch64-poky-linux-ld --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot ) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for a BSD-compatible install... /media/talel/data/menzu-zeus/gw/tmp/hosttools/install -c
checking whether ln -s works... yes
checking for getrandom... yes
checking for ar... /media/talel/data/menzu-zeus/gw/tmp/hosttools/ar
checking for etags... no
checking for emacs-etags... no
checking for perl5... no
checking for perl... /media/talel/data/menzu-zeus/gw/tmp/hosttools/perl
checking for python support... disabled
checking for aarch64-poky-linux-gcc... (cached) aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
checking whether we are using the GNU C compiler... (cached) yes
checking whether aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot accepts -g... (cached) yes
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C89... (cached) none needed
checking for aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot option to accept ISO C99... none needed
checking for ANSI C header files... (cached) yes
checking for fcntl.h... yes
checking for regex.h... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/mman.h... yes
checking for sys/sockio.h... no
checking for sys/select.h... yes
checking for sys/param.h... yes
checking for sys/sysctl.h... yes
checking for net/if6.h... no
checking for sys/socket.h... yes
checking for net/route.h... yes
checking for linux/netlink.h... yes
checking for linux/rtnetlink.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for working volatile... yes
checking for sysctlbyname... no
checking for flexible array members... yes
checking for mmap... yes
checking for seteuid... yes
checking for setresuid... (cached) yes
checking for setegid... yes
checking for setresgid... yes
checking for ftello... yes
checking for fseeko... yes
checking for static inline breakage... no
checking for size_t... yes
checking for ssize_t... yes
checking for uintptr_t... yes
checking for socklen_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for long long... yes
checking for uname... yes
checking for GCC noreturn attribute... yes
checking for struct lifconf... no
checking for kqueue... no
checking if unistd.h or sys/types.h defines fd_set... yes
checking whether byte ordering is bigendian... (cached) no
checking for GeoIP support... disabled
checking for GSSAPI library... disabled
checking for random device... using "/dev/random"
checking for arc4random... no
checking for arc4random_stir... no
checking for arc4random_addrandom... no
checking whether to build with thread support... yes
checking for pthread_create in -lpthread... yes
checking for sigwait... yes
checking for pthread_attr_getstacksize... yes
checking for pthread_attr_setstacksize... yes
checking for PTHREAD_MUTEX_ADAPTIVE_NP... using adaptive lock type
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sched_yield... yes
checking for pthread_yield... yes
checking for pthread_yield_np... no
checking for pthread_setname_np... yes
checking for pthread_set_name_np... no
checking for pthread_np.h... no
checking for sysconf... yes
checking for libtool... yes
checking for OpenSSL library... using OpenSSL from /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/lib and /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot/usr/include
checking whether linking with OpenSSL works... assuming it does work on target platform
checking whether linking with OpenSSL requires -ldl... no
checking for OpenSSL FIPS mode support... yes
checking for OpenSSL DSA support... yes
checking for EVP_sha256... yes
checking for EVP_sha384... yes
checking for EVP_sha512... yes
checking for DH_get0_key... yes
checking for ECDSA_SIG_get0... yes
checking for RSA_set0_key... yes
checking for DSA_get0_pqg... yes
checking for OpenSSL ECDSA support... using --with-ecdsa
checking for OpenSSL GOST support... using --with-gost
checking for OpenSSL Ed25519 support... using --with-eddsa
checking for OpenSSL AES support... using --with-aes
checking for the Algorithm for Client Cookie... aes
checking for using OpenSSL for hash functions... no
checking for PKCS11 support... no
checking for PKCS11 tools... disabled
checking for native PKCS11... disabled
checking for clock_gettime... yes
checking for lmdb library... no
checking for libxml2 library... no
checking for json library... no
checking for zlib library... yes
checking for library containing deflate... -lz
checking for smf_enable_instance in -lscf... no
checking for flockfile... yes
checking for getc_unlocked... yes
checking whether to build with threads... yes
checking if "aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot" supports -fno-strict-aliasing... no
checking if "aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot" supports -fno-delete-null-pointer-checks... no
checking for catgets... yes
checking whether to use purify... no
checking whether to use gperftools profiler... no
configure: WARNING: Internal symbol table does not work with libtool.  Disabling symbol table.
checking for IPv6 structures... yes
checking for Kame IPv6 support... no
checking for in6_addr... yes
checking for in6addr_any... yes
checking for in6addr_loopback... yes
checking for sin6_scope_id in struct sockaddr_in6... yes
checking for in6_pktinfo... yes
checking for struct sockaddr_storage... yes
checking for struct if_laddrreq... no
checking for struct if_laddrconf... no
checking for inet_ntop with IPv6 support... assuming inet_ntop not needed
checking for working inet_pton with IPv6 support... assuming inet_pton needed
checking for sa_len in struct sockaddr... no
checking for struct msghdr flavor... 4.4BSD
checking for type in_port_t... yes
checking for TCP_FASTOPEN socket option... yes
checking for struct addrinfo... yes
checking for struct rrsetinfo... no
checking for int sethostent... no
checking for int endhostent... no
checking for getnetbyaddr(in_addr_t, ...)... yes
checking for int setnetent... no
checking for int endnetent... no
checking for gethostbyaddr(const void *, size_t, ...)... no
checking for h_errno in netdb.h... yes
checking for getnameinfo prototype definitions... not match any subspecies; assume standard definition
checking for gai_strerror prototype definitions... not match any subspecies; assume standard definition
checking for getipnodebyname... no
checking for getnameinfo... yes
checking for getaddrinfo... (cached) yes
checking for gai_strerror... yes
checking for getifaddrs... yes
checking for interface list sysctl... no
checking for correctly declared strsep()... yes
checking for memmove... yes
checking for strtoul... yes
checking for strlcpy... no
checking for strlcat... no
checking for strcasestr... yes
configure: checking for readline with -lreadline
checking for readline... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking readline/history.h usability... yes
checking readline/history.h presence... yes
checking for readline/history.h... yes
checking sprintf return type... int
checking for vsnprintf... yes
checking printf for %z support... assuming target platform supports %z
checking for strerror... (cached) yes
checking for chroot... yes
checking linux/types.h usability... yes
checking linux/types.h presence... yes
checking for linux/types.h... yes
checking sys/capability.h usability... yes
checking sys/capability.h presence... yes
checking for sys/capability.h... yes
checking for linux/capability.h... yes
checking for cap_set_proc in -lcap... yes
checking sys/prctl.h usability... yes
checking sys/prctl.h presence... yes
checking for sys/prctl.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking for tzset... yes
checking for optarg declaration... yes
checking st_mtim.tv_nsec... yes
checking for type rlim_t... yes
checking for strings.h... (cached) yes
checking for if_nametoindex... yes
checking for nanosleep... yes
checking for usleep... yes
checking for explicit_bzero... yes
checking for usable stdatomic.h... yes
checking if -latomic is needed to use 64-bit stdatomic.h primitives... no
checking architecture type for atomic operations... noatomic
checking compiler support for __builtin_expect... yes
checking compiler support for __builtin_clz... yes
checking for latex... no
checking for pdflatex... no
checking for dblatex... no
checking for w3m... no
checking for pandoc... pandoc
checking for xsltproc... xsltproc
checking for xmllint... xmllint
checking for doxygen... doxygen
checking for curl... curl
checking for Docbook-XSL path... auto
checking for html/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/docbook.xsl
checking for xhtml/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/docbook.xsl
checking for manpages/docbook.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl
checking for html/chunk.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/chunk.xsl
checking for xhtml/chunk.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/chunk.xsl
checking for html/chunktoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/chunktoc.xsl
checking for xhtml/chunktoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/chunktoc.xsl
checking for html/maketoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/html/maketoc.xsl
checking for xhtml/maketoc.xsl... /usr/share/xml/docbook/stylesheet/docbook-xsl/xhtml/maketoc.xsl
checking for xsl/docbook.xsl... "not found"
checking for xsl/latex_book_fast.xsl... "not found"
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for setlocale... yes
using default tuning
checking whether to enable query trace logging... no
checking for dlopen in -ldl... yes
checking for dlopen... yes
checking for dlclose... yes
checking for dlsym... yes
checking for Postgres DLZ driver... no
checking for MySQL DLZ driver... no
checking for Berkeley DB DLZ driver...... no
checking for file system DLZ driver... no
checking for LDAP DLZ driver... no
checking for ODBC DLZ driver... no
checking for stub DLZ driver... no
checking contributed DLZ drivers... no
configure: creating ./config.status
config.status: creating make/rules
config.status: creating make/includes
config.status: creating make/Makefile
config.status: creating make/mkdep
config.status: creating Makefile
config.status: creating bin/Makefile
config.status: creating bin/check/Makefile
config.status: creating bin/confgen/Makefile
config.status: creating bin/confgen/unix/Makefile
config.status: creating bin/delv/Makefile
config.status: creating bin/dig/Makefile
config.status: creating bin/dnssec/Makefile
config.status: creating bin/named/Makefile
config.status: creating bin/named/unix/Makefile
config.status: creating bin/nsupdate/Makefile
config.status: creating bin/pkcs11/Makefile
config.status: creating bin/python/Makefile
config.status: creating bin/python/isc/Makefile
config.status: creating bin/python/isc/utils.py
config.status: creating bin/python/isc/tests/Makefile
config.status: creating bin/python/dnssec-checkds.py
config.status: creating bin/python/dnssec-coverage.py
config.status: creating bin/python/dnssec-keymgr.py
config.status: creating bin/python/isc/__init__.py
config.status: creating bin/python/isc/checkds.py
config.status: creating bin/python/isc/coverage.py
config.status: creating bin/python/isc/dnskey.py
config.status: creating bin/python/isc/eventlist.py
config.status: creating bin/python/isc/keydict.py
config.status: creating bin/python/isc/keyevent.py
config.status: creating bin/python/isc/keymgr.py
config.status: creating bin/python/isc/keyseries.py
config.status: creating bin/python/isc/keyzone.py
config.status: creating bin/python/isc/policy.py
config.status: creating bin/python/isc/rndc.py
config.status: creating bin/python/isc/tests/dnskey_test.py
config.status: creating bin/python/isc/tests/policy_test.py
config.status: creating bin/rndc/Makefile
config.status: creating bin/tests/Makefile
config.status: creating bin/tests/headerdep_test.sh
config.status: creating bin/tests/optional/Makefile
config.status: creating bin/tests/pkcs11/Makefile
config.status: creating bin/tests/pkcs11/benchmarks/Makefile
config.status: creating bin/tests/system/Makefile
config.status: creating bin/tests/system/conf.sh
config.status: creating bin/tests/system/dlz/prereq.sh
config.status: creating bin/tests/system/dlzexternal/Makefile
config.status: creating bin/tests/system/dlzexternal/ns1/dlzs.conf
config.status: creating bin/tests/system/dyndb/Makefile
config.status: creating bin/tests/system/dyndb/driver/Makefile
config.status: creating bin/tests/system/inline/checkdsa.sh
config.status: creating bin/tests/system/lwresd/Makefile
config.status: creating bin/tests/system/pipelined/Makefile
config.status: creating bin/tests/system/rndc/Makefile
config.status: creating bin/tests/system/rsabigexponent/Makefile
config.status: creating bin/tests/system/tkey/Makefile
config.status: creating bin/tests/virtual-time/Makefile
config.status: creating bin/tests/virtual-time/conf.sh
config.status: creating bin/tools/Makefile
config.status: creating contrib/scripts/check-secure-delegation.pl
config.status: creating contrib/scripts/zone-edit.sh
config.status: creating doc/Makefile
config.status: creating doc/arm/Makefile
config.status: creating doc/arm/noteversion.xml
config.status: creating doc/arm/pkgversion.xml
config.status: creating doc/arm/releaseinfo.xml
config.status: creating doc/doxygen/Doxyfile
config.status: creating doc/doxygen/Makefile
config.status: creating doc/doxygen/doxygen-input-filter
config.status: creating doc/misc/Makefile
config.status: creating doc/tex/Makefile
config.status: creating doc/tex/armstyle.sty
config.status: creating doc/xsl/Makefile
config.status: creating doc/xsl/isc-docbook-chunk.xsl
config.status: creating doc/xsl/isc-docbook-html.xsl
config.status: creating doc/xsl/isc-manpage.xsl
config.status: creating doc/xsl/isc-notes-html.xsl
config.status: creating isc-config.sh
config.status: creating lib/Makefile
config.status: creating lib/bind9/Makefile
config.status: creating lib/bind9/include/Makefile
config.status: creating lib/bind9/include/bind9/Makefile
config.status: creating lib/dns/Makefile
config.status: creating lib/dns/include/Makefile
config.status: creating lib/dns/include/dns/Makefile
config.status: creating lib/dns/include/dst/Makefile
config.status: creating lib/dns/tests/Makefile
config.status: creating lib/irs/Makefile
config.status: creating lib/irs/include/Makefile
config.status: creating lib/irs/include/irs/Makefile
config.status: creating lib/irs/include/irs/netdb.h
config.status: creating lib/irs/include/irs/platform.h
config.status: creating lib/irs/tests/Makefile
config.status: creating lib/isc/noatomic/Makefile
config.status: creating lib/isc/noatomic/include/Makefile
config.status: creating lib/isc/noatomic/include/isc/Makefile
config.status: creating lib/isc/pthreads/Makefile
config.status: creating lib/isc/pthreads/include/Makefile
config.status: creating lib/isc/pthreads/include/isc/Makefile
config.status: creating lib/isc/Makefile
config.status: creating lib/isc/include/Makefile
config.status: creating lib/isc/include/isc/Makefile
config.status: creating lib/isc/include/isc/platform.h
config.status: creating lib/isc/include/pk11/Makefile
config.status: creating lib/isc/include/pkcs11/Makefile
config.status: creating lib/isc/tests/Makefile
config.status: creating lib/isc/nls/Makefile
config.status: creating lib/isc/unix/Makefile
config.status: creating lib/isc/unix/include/Makefile
config.status: creating lib/isc/unix/include/isc/Makefile
config.status: creating lib/isc/unix/include/pkcs11/Makefile
config.status: creating lib/isccc/Makefile
config.status: creating lib/isccc/include/Makefile
config.status: creating lib/isccc/include/isccc/Makefile
config.status: creating lib/isccfg/Makefile
config.status: creating lib/isccfg/include/Makefile
config.status: creating lib/isccfg/include/isccfg/Makefile
config.status: creating lib/isccfg/tests/Makefile
config.status: creating lib/lwres/Makefile
config.status: creating lib/lwres/include/Makefile
config.status: creating lib/lwres/include/lwres/Makefile
config.status: creating lib/lwres/include/lwres/netdb.h
config.status: creating lib/lwres/include/lwres/platform.h
config.status: creating lib/lwres/man/Makefile
config.status: creating lib/lwres/tests/Makefile
config.status: creating lib/lwres/unix/Makefile
config.status: creating lib/lwres/unix/include/Makefile
config.status: creating lib/lwres/unix/include/lwres/Makefile
config.status: creating lib/samples/Makefile
config.status: creating lib/samples/Makefile-postinstall
config.status: creating unit/Makefile
config.status: creating unit/unittest.sh
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing libtool commands
config.status: executing chmod commands
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-dependency-tracking
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/make'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -rf ./atf
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/unit'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pk11'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include/pkcs11'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/nls'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/pthreads'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include/isc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc/noatomic'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisc.la libisc-nosymtbl.la libisc.la \
libisc-nosymtbl.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include/isccc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisccc.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include/dst'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libdns.la timestamp
rm -f gen code.h include/dns/enumtype.h include/dns/enumclass.h
rm -f include/dns/rdatastruct.h
rm -f dnstap.pb-c.c dnstap.pb-c.h include/dns/dnstap.pb-c.h
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/dns'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include/isccfg'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libisccfg.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/isccfg'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include/bind9'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libbind9.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/bind9'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f timestamp
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/man'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include/lwres'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f liblwres.la liblwres.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/lwres'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include/irs'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs/include'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f libirs.la libirs.la timestamp
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/irs'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f resolve sample-async sample-gai sample-update sample-request nsprobe
rm -f sample.key
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib/samples'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/lib'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f named lwresd builtin.lo client.lo config.lo control.lo controlconf.lo fuzz.lo  interfacemgr.lo listenlist.lo log.lo logconf.lo main.lo notify.lo query.lo server.lo sortlist.lo statschannel.lo tkeyconf.lo tsigconf.lo update.lo xfrout.lo zoneconf.lo lwaddr.lo lwresd.lo lwdclient.lo lwderror.lo lwdgabn.lo lwdgnba.lo lwdgrbn.lo lwdnoop.lo lwsearch.lo  
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/named'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f rndc
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f dig host nslookup
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dig'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f delv
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/delv'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f dnssec-keygen dnssec-signzone dnssec-keyfromlabel dnssec-dsfromkey dnssec-revoke dnssec-settime dnssec-verify dnssec-importkey
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/dnssec'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f arpaname named-journalprint named-rrchecker  nsec3hash genrandom isc-hmac-fixup mdig
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tools'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f nsupdate
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/nsupdate'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f named-checkconf named-checkzone r1.htm
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/check'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen/unix'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f rndc-confgen ddns-confgen tsig-keygen
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/confgen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f driver.so
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f db.lo driver.lo instance.lo lock.lo log.lo syncptr.lo zone.lo sample.so lib/sample.so
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f lwtest
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f pipequeries
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f gencheck
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f bigkey
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f keycreate keydelete
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
if test -f ./cleanall.sh; then /bin/bash ./cleanall.sh; fi
rm -f systests.output
rm -f random.data
rm -f parallel.mk
rm -f feature-test
rm -f feature-test.lo
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f driver.so
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dlzexternal'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver
make[5]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f db.lo driver.lo instance.lo lock.lo log.lo syncptr.lo zone.lo sample.so lib/sample.so
make[5]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb/driver'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/dyndb'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f lwtest
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/lwresd'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f pipequeries
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/pipelined'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f gencheck
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rndc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f bigkey
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/rsabigexponent'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey
make[4]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f keycreate keydelete
make[4]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system/tkey'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
if test -f ./cleanall.sh; then /bin/bash ./cleanall.sh; fi
rm -f systests.output
rm -f random.data
rm -f parallel.mk
rm -f feature-test
rm -f feature-test.lo
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/system'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f cfg_test makejournal wire_test
( cd optional; make clean)
make[3]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/optional'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f  adb_test byaddr_test backtrace_test backtrace_test_nosymtbl byname_test db_test dst_test entropy_test entropy2_test gsstest gxba_test gxbn_test hash_test fsaccess_test inter_test keyboard_test lex_test lfsr_test log_test lwres_test lwresconf_test master_test mempool_test name_test nsecify ratelimiter_test rbt_test rwlock_test serial_test shutdown_test sig0_test sock_test sym_test task_test timer_test zone_test
rm -f backtrace_test_symtbl.c
make[3]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests/optional'
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin/tests'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/bin'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc
make[1]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
rm -f Bv9ARM.aux Bv9ARM.brf Bv9ARM.glo Bv9ARM.idx Bv9ARM.toc
rm -f Bv9ARM.log Bv9ARM.out
rm -f notes.aux notes.brf notes.glo notes.idx notes.toc
rm -f notes.log notes.out
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/arm'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/misc'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/xsl'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/doxygen'
making clean in /media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex
make[2]: Entering directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[2]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc/tex'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
make[1]: Leaving directory '/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/build/doc'
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
===============================================================================
Configuration summary:
-------------------------------------------------------------------------------
Optional features enabled:
    Multiprocessing support (--enable-threads)
    ECDSA algorithm support (--with-ecdsa)
    Print backtrace on crash (--enable-backtrace)
    Use symbol table for backtrace, named only (--enable-symtable)
    Use GNU libtool (--with-libtool)
    Dynamically loadable zone (DLZ) drivers:
        None
-------------------------------------------------------------------------------
Features disabled or unavailable on this platform:
    Large-system tuning (--with-tuning)
    Allow 'dnstap' packet logging (--enable-dnstap)
    GeoIP access control (--with-geoip)
    GSS-API (--with-gssapi)
    Allow 'fixed' rrset-order (--enable-fixed-rrset)
    PKCS#11/Cryptoki support (--with-pkcs11)
    Native PKCS#11/Cryptoki support (--enable-native-pkcs11)
    GOST algorithm support (--with-gost)
    EDDSA algorithm support (--with-eddsa)
    Use libseccomp system call filtering (--enable-seccomp)
    Very verbose query trace logging (--enable-querytrace)
    Automated Testing Framework (--with-atf)
    Python tools (--with-python)
    XML statistics (--with-libxml2)
    JSON statistics (--with-libjson)
    LMDB database to store configuration for 'addzone' zones (--with-lmdb)
    IDN support (--with-libidn2)
-------------------------------------------------------------------------------
Configured paths:
    prefix: /usr
    sysconfdir: /etc/bind
    localstatedir: /var
-------------------------------------------------------------------------------
Compiler: aarch64-poky-linux-gcc  -mcpu=cortex-a53+crc+crypto -fstack-protector-strong  -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/media/talel/data/menzu-zeus/gw/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/recipe-sysroot
    aarch64-poky-linux-gcc (GCC) 9.2.0
    Copyright (C) 2019 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
Unrecognized options:
    --disable-silent-rules, --disable-dependency-tracking
-------------------------------------------------------------------------------
For more detail, use --enable-full-report.
===============================================================================
DEBUG: Shell function do_configure finished
DEBUG: Executing python function do_qa_configure
NOTE: Checking autotools environment for common misconfiguration
ERROR: QA Issue: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this. [configure-unsafe]
NOTE: Checking configure output for unrecognised options
ERROR: Fatal QA errors found, failing task.
DEBUG: Python function do_qa_configure finished


Re: [IMX8MM][L5.4.24] dhcp error bind do_configure

Andy Pont
 

Talel wrote...

I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini
Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs : 
What does the log file /media/talel/data/menzu-zeus/menzu/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/temp/log.do_configure.20544 contain?

-Andy.



[IMX8MM][L5.4.24] dhcp error bind do_configure

BELHADJ SALEM Talel
 

Hi ,All,

I'm working on a Ubuntu 16.04 machine ,and working with NXP release L5.4.24 for IMX8M Mini
Everything is working correctly , but when I try to bitbake dhcp , an error with bind occurs :

ERROR: bind-9.11.5-P4-r0 do_configure: QA Issue: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this. [configure-unsafe]
ERROR: bind-9.11.5-P4-r0 do_configure: Fatal QA errors found, failing task.
ERROR: Logfile of failure stored in: /media/talel/data/menzu-zeus/menzu/tmp/work/aarch64-poky-linux/bind/9.11.5-P4-r0/temp/log.do_configure.20544
ERROR: Task (/media/talel/data/menzu-zeus/sources/poky/meta/recipes-connectivity/bind/bind_9.11.5-P4.bb:do_configure) failed with exit code '1'

The version of dhcp is 4.4.1 , and bind is 9.11.5-P4

What is the problem ?

Thanks, Talel


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Otavio Salvador
 

Hello all,

Em qui., 8 de out. de 2020 às 06:10, Andrey Zhizhikin
<andrey.z@...> escreveu:
Please note: with this configuration you would get a kernel from NXP
(versioned 5.4.24). If you would like to utilize the NXP kernel with
latest stable patch level, you should switch
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx" to
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx-fslc"
For all i.MX8 the fslc distributions use the NXP BSP by default so
using 'fslc-wayland' should work just fine.

...
You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks
For products we, at O.S. Systems, have been using our OEL[1]
distribution as a baseline where we create the product specific one.

1. https://github.com/OSSystemsEmbeddedLinux/ossystems-embedded-linux-platform

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Brian,

On Tue, Oct 6, 2020 at 10:44 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 01:22 PM, Andrey Zhizhikin wrote:

Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???

I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.

When I did NXP released builds I would use fsl-wayland distro but if memory serves me right a core-image-minimal would not boot. Only core-image-base images did and they were quite large.
I just did a following build:
$ MACHINE=imx8mmevk DISTRO=fsl-wayland bitbake core-image-minimal

Image produced boots fine on i.MX8M Mini EVK.

Runtime device info:
# cat /etc/os-release
ID=fsl-wayland
NAME="FSL Wayland"
VERSION="3.2-snapshot-20201008 (master)"
VERSION_ID=3.2-snapshot-20201008
PRETTY_NAME="FSL Wayland 3.2-snapshot-20201008 (master)"

# uname -a
Linux imx8mmevk 5.4.24+gbabac008e5cf #1 SMP PREEMPT Sat May 30
07:25:46 UTC 2020 aarch64 GNU/Linux

Please note: with this configuration you would get a kernel from NXP
(versioned 5.4.24). If you would like to utilize the NXP kernel with
latest stable patch level, you should switch
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx" to
PREFERRED_PROVIDER_virtual/kernel_mx8mm = "linux-imx-fslc"


.
I do need to create my own distro but kind of would like to start from core-image-minimal and build up rather than take something like fsl-wayland and try to figure out what I don't need. Being new to NXP family this approach "feels" more logical.

Is poky what's causing my pain?

You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks

Regards,

Brian


--
Regards,
Andrey.


Re: [PATCH] imx-boot: add back LD_LIBRARY_PATH exporting

Ming Liu <liu.ming50@...>
 


Otavio Salvador <otavio.salvador@...> 於 2020年10月5日 週一 下午3:43寫道:

Em seg., 5 de out. de 2020 às 09:41, Ming Liu <liu.ming50@...> escreveu:
>
> From: Ming Liu <liu.ming50@...>
>
> It was dropped by commit 65100fad:
> [ imx-mkimage: upgrade to version 1.0 ]
>
> after that, the following error was observed again:
> | ./mkimage_uboot -E -p 0x3000 -f u-boot.its u-boot.itb
> | ./mkimage_uboot: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory
>
> Signed-off-by: Ming Liu <liu.ming50@...>

Please open a PR with it.


--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

On Tue, Oct 6, 2020 at 10:44 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 01:22 PM, Andrey Zhizhikin wrote:

Hello Brian,

On Tue, Oct 6, 2020 at 9:51 PM Brian Hutchinson <b.hutchman@...> wrote:

... what "distro" 'should' I be using since I have a custom board that's based on imx8mm evk but I don't necessarily want/need wifi, bluetooth, video, touchscreen etc.???

I suggest you go with your own distro then, as you can leverage the
DISTRO_FEATURES in it yourself. You can either take any of 'fsl-'
prefixed distros over 'poky' if you need some NXP proprietary
components (e.g. VPU, GPU, etc), or take any of 'fslc-' prefixed ones
if you want to stay with mainline. Please note - I do not say that
'poky' would not work here! :) It is just a reference distro from
Yocto Project, which targets qemu on the first place, but also works
well for real HW.

This is the way we build our distro (derived from 'fsl-wayland'), and
so far it has proven to be working quite well. I also do sanity build
and run the 'fsl-wayland' off the master on imx8mmevk to make sure
there are no regressions.

When I did NXP released builds I would use fsl-wayland distro but if memory serves me right a core-image-minimal would not boot. Only core-image-base images did and they were quite large.

I do need to create my own distro but kind of would like to start from core-image-minimal and build up rather than take something like fsl-wayland and try to figure out what I don't need. Being new to NXP family this approach "feels" more logical.
I think you're mixing up 2 conceptual points here: distro vs image.
You can have a wayland distro, but only include a handful of packages
and features of it into the image. Distro does not define the content
of the image, image recipe does.

Section 4.3.2. of Yocto Overview Manual gives a very nice overview of
those concepts:
https://www.yoctoproject.org/docs/3.1.2/overview-manual/overview-manual.html#metadata-machine-configuration-and-policy-configuration


Is poky what's causing my pain?

You can see what distro features you have included when you do
'bitbake -e' and search for DISTRO_FEATURES. If you have (and
according to what you say - you do :) ) some pieces you do not need -
you can always either not include them in your custom distro, or use
DISTRO_FEATURES_remove = "<unneeded list>".

I've been doing TI based builds forever and recently switched over to NXP based products so still learning the lay of the land. I finally discovered I don't think I want to be building based off NXP releases from codeaurora and that Freescale is the better base for our products but not 100% clear what distro's are available and which ones I should focus on.

Those distros are located in a meta-freescale-distro layer, you can
peek there to see what's available.

I'll look. Thanks

Regards,

Brian


--
Regards,
Andrey.


Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.

Andrey Zhizhikin
 

Hello Brian,

On Tue, Oct 6, 2020 at 10:58 PM Brian Hutchinson <b.hutchman@...> wrote:

On Tue, Oct 6, 2020 at 12:42 PM, Brian Hutchinson wrote:



Smoking sstate & tmp and trying build again with:


IMAGE_INSTALL_append = " firmware-imx-sdma-imx7d firmware-imx-epdc"

So just finished the above cycle and flashed sdcard. Think we got somewhere this time!

I get only one instance of sdma error:

[ 0.117495] EINJ: ACPI disabled.
[ 0.126332] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.126346] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[ 0.134253] mxs-dma 33000000.dma-controller: initialized
[ 0.135378] Bus freq driver module loaded

... of note here is it didn't say it was using ROM version!!!!

And I have firmware package for sdma now:

root@imx8mmevk:~# rpm -qa | grep -i firmware
linux-firmware-ath10k-license-20200817-r0.noarch
firmware-qca9377-3.0.2-r0.noarch
firmware-imx-epdc-8.8-r0.noarch
linux-firmware-ath10k-20200817-r0.noarch
firmware-imx-sdma-imx7d-8.8-r0.noarch


root@imx8mmevk:/lib/firmware# ls -l
-rw-r--r-- 1 root root 2713 Mar 9 12:34 LICENSE.QualcommAtheros_ath10k
drwxr-xr-x 11 root root 1024 Mar 9 12:34 ath10k
drwxr-xr-x 4 root root 1024 Mar 9 12:34 imx
drwxr-xr-x 2 root root 1024 Mar 9 12:34 qca
drwxr-xr-x 2 root root 1024 Mar 9 12:34 qca9377
-rw-r--r-- 1 root root 3764 Mar 9 12:34 regulatory.db
-rw-r--r-- 1 root root 1182 Mar 9 12:34 regulatory.db.p7s
drwxr-xr-x 3 root root 1024 Mar 9 12:34 wlan

... and /lib/firmware/imx/sdma looks like:

root@imx8mmevk:/lib/firmware/imx/sdma# ls
sdma-imx7d.bin

So hopefully this helps with the ALSA issue I was chasing that led me to this sdma issue in the first place!

Thanks guys! I don't know why core-image-minimal isn't working ...
Well, this is I guess an expected behavior. firmware packages are
listed in MACHINE_EXTRA_RRECOMMENDS, which is (according to Yocto
Reference manual, link
https://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-MACHINE_EXTRA_RRECOMMENDS)
is only considered when packagegroup-base is installed in the image
and does not affect 'core-image-minimal' or 'core-image-full-cmdline'
images.

That is the reason that even if the package is added in the
imx-base.inc (like Otavio suggested in his patch) - you would not
receive it in core-image-minimal and you would have to install it
explicitly.

As for firmware packages themselves, I guess it should be changed from
MACHINE_EXTRA_RRECOMMENDS to MACHINE_EXTRA_RDEPENDS in order to bail
out at the build time rather than figure out that they are not present
on the device at boot time. But this is yet a separate point, which
actually would not solve your original issue as you either need an
image recipe which includes packagegroup-base or you have to
explicitly list them in IMAGE_INSTALL.

I see there is a firmware-imx-8m package so maybe I should add it.
This package is actually empty, and only serves as a deploy target to
provide Cadence HDMI FW for imx-boot to build a boot container. Even
if you try to install it - you would not receive any FW files on the
target.


Regards,

Brian




--
Regards,
Andrey.

421 - 440 of 24893