Re: How to configure eth0 on fslc-image-network-full-cmdline

Andrey Zhizhikin

Hello Leo and Fabio,

On Wed, Jan 5, 2022 at 2:18 PM Fabio Estevam <festevam@...> wrote:

Hi Leo,

On Wed, Nov 17, 2021 at 7:40 PM Leo <Leo.E.Meza@...> wrote:


I'm using a wandboard (rev d1) and building the fslc-image-network-full-cmdline image (honister branch). I've got ethernet wired to a switch on my home network, but I cannot figure out how to setup this build to bring up eth0 via DHCP. Any help would be appreciated. Is this image supposed to bring up eth0 right out of the box?
There is a recent fix in 5.15.13 for Ethernet on wandboard
There is a PR in meta-freescale layer against [master] branch, which
upgrades the Kernel to 5.15.13:

Once merged, you can build the image of [master] to verify if your
problem persists.

After applying this fix, I can confirm Ethernet is functional.

To get an IP address via DHCP:
udhcpc -i eth0


Join to automatically receive all group messages.