On Wed, Nov 17, 2021 at 11:40 PM, Leo wrote:

Hello,

I'm using a wandboard (rev d1) and building the fslc-image-network-full-cmdline image (honister branch). I've got ethernet wired to a switch on my home network, but I cannot figure out how to setup this build to bring up eth0 via DHCP. Any help would be appreciated. Is this image supposed to bring up eth0 right out of the box?

Build Configuration:
BB_VERSION           = "1.52.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-20.04"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "wandboard"
DISTRO               = "poky"
DISTRO_VERSION       = "3.4"
TUNE_FEATURES        = "arm vfp cortexa9 neon thumb callconvention-hard"
TARGET_FPU           = "hard"
meta                 
meta-poky            = "HEAD:da5d1b540e052c862232f8bd464d30bb387fe86e"
meta-oe              
meta-multimedia      
meta-python          
meta-networking      = "HEAD:ad52a41de8b4b7d619d1376d0a0090ebcfff56da"
meta-freescale       = "HEAD:ed3435620a2404c241fef3c4ef90d1f31d3b7a8a"
meta-freescale-3rdparty = "HEAD:fd3c4aa47c93b77942dfcf1ab8ded0c54cb589d5"
meta-freescale-distro = "HEAD:d2e27cc4778663450495a67bfb036cba600cb27a"


root@wandboard:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::21f:7bff:fe0a:90b8  prefixlen 64  scopeid 0x20<link>
        ether 00:1f:7b:0a:90:b8  txqueuelen 1000  (Ethernet)
        RX packets 14  bytes 1200 (1.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 32  bytes 6786 (6.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@wandboard:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# Wireless interfaces
iface wlan0 inet dhcp
        wireless_mode managed
        wireless_essid any
        wpa-driver wext
        wpa-conf /etc/wpa_supplicant.conf

iface atml0 inet dhcp

# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
iface eth1 inet dhcp

# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet static
        address 192.168.7.2
        netmask 255.255.255.0
        network 192.168.7.0
        gateway 192.168.7.1

# Bluetooth networking
iface bnep0 inet dhcp

I have this issue after updating meta layers to honister and kernel to version 5.10. My problem was fixed by changing fec node in device tree - phy-mode value should be rgmii-id and phy-reset-duration should be increased:

phy-mode = "rgmii-id";
phy-reset-duration = <10>;

You can see at commit logs in imx devicetrees on kernel repository for more information.

Best regards,

-- 
Michał Kotyla
Embedded Linux Developer
GPG: 14FC54DC259CF70A
https://3mdeb.com | @3mdeb_com