- How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.
Re: How to get firmware-imx for imx8mm evk into sdcard image? I'm getting firmware loading errors for sdma-imx7d.bin etc.
On Wed, Oct 7, 2020 at 5:49 AM Andrey Zhizhikin <andrey.z@...
Well, this is I guess an expected behavior. firmware packages are
listed in MACHINE_EXTRA_RRECOMMENDS, which is (according to Yocto
Reference manual, link
is only considered when packagegroup-base is installed in the image
and does not affect 'core-image-minimal' or 'core-image-full-cmdline'
That is the reason that even if the package is added in the
imx-base.inc (like Otavio suggested in his patch) - you would not
receive it in core-image-minimal and you would have to install it
As for firmware packages themselves, I guess it should be changed from
MACHINE_EXTRA_RRECOMMENDS to MACHINE_EXTRA_RDEPENDS in order to bail
out at the build time rather than figure out that they are not present
on the device at boot time. But this is yet a separate point, which
actually would not solve your original issue as you either need an
image recipe which includes packagegroup-base or you have to
explicitly list them in IMAGE_INSTALL.
> I see there is a firmware-imx-8m package so maybe I should add it.
This package is actually empty, and only serves as a deploy target to
provide Cadence HDMI FW for imx-boot to build a boot container. Even
if you try to install it - you would not receive any FW files on the
Hate to bring up an old thread again but I'm back to trying to pair down my image size and trying to use core-image-minimal and having issues with firmware-imx-sdma-imx7d & sdma-imx7d.bin
If I just build imx-sdma as a kernel module do I even need to worry about sdma-imx7d.bin being in the rootfs?
Join firstname.lastname@example.org to automatically receive all group messages.